component
AD5665RBRUZ-1
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278
{
"slug": "ad5665rbruz-1",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Pre-ordered Chips, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"ad5665rbruz-1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ad5665rbruz-1.kicad_sym",
"ad5665rbruz-1.kicad_mod",
"ad5665rbruz-1.glb",
"ad5665rbruz-1.step",
"ad5665rbruz-1.lbr",
"docs/hero.png",
"docs/ad5665rbruz-1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ad5665rbruz-1-hero.glb",
"ad5665rbruz-1-hero.overlay.json",
"ad5665rbruz-1-etched.glb"
],
"component": {
"mpn": "AD5665RBRUZ-1",
"manufacturer": "Analog Devices",
"package": "TSSOP-14",
"pin_count": 14,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "Pre-ordered Chips",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD5625R_5645R_5665R_5625_5665.pdf",
"parts": {
"symbol": "ad5665rbruz-1.kicad_sym",
"footprint": "ad5665rbruz-1.kicad_mod",
"model_3d": "ad5665rbruz-1-hero.glb",
"model_3d_plain": "ad5665rbruz-1-etched.glb",
"model_3d_step": "ad5665rbruz-1-etched.step",
"model_3d_step_plain": "ad5665rbruz-1.step",
"lbr": "ad5665rbruz-1.lbr"
},
"distributor_links": {
"lcsc": "C649992",
"digikey": "AD5665RBRUZ-1-ND",
"mouser": "584-AD5665RBRUZ-1"
},
"distributor_check": {
"checked_at": "2026-10-30T20:49:14Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "AD5665RBRUZ-1-ND",
"status": "found"
},
"mouser": {
"pn": "584-AD5665RBRUZ-1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "LDAC",
"type": "input",
"description": "Pulsing this pin low allows any or all DAC registers to be updated if the input registers have new data, or it can be tied permanently low."
},
{
"number": "2",
"name": "ADDR1",
"type": "input",
"description": "Three-state address input that sets the two least significant bits (A1, A0) of the 7-bit slave address."
},
{
"number": "3",
"name": "VDD",
"type": "power_in",
"description": "Power supply input that can be operated from 2.7 V to 5.5 V and should be decoupled with a 10 µF capacitor in parallel with a 0.1 µF capacitor to GND."
},
{
"number": "4",
"name": "VOUTA",
"type": "output",
"description": "Analog output voltage from DAC A, with a rail-to-rail output amplifier."
},
{
"number": "5",
"name": "VOUTC",
"type": "output",
"description": "Analog output voltage from DAC C, with a rail-to-rail output amplifier."
},
{
"number": "6",
"name": "POR",
"type": "input",
"description": "Power-on reset pin: tying it to GND powers up the device to 0 V, and tying it to VDD powers up the device to midscale."
},
{
"number": "7",
"name": "VREFIN/VREFOUT",
"type": "bidirectional",
"description": "Reference input by default when using an external reference, or reference output when using the internal 2.5 V reference (R suffix versions only)."
},
{
"number": "8",
"name": "ADDR2",
"type": "input",
"description": "Three-state address input that sets bits A3 and A2 of the 7-bit slave address."
},
{
"number": "9",
"name": "CLR",
"type": "input",
"description": "Falling-edge sensitive asynchronous clear input that, while low, ignores all LDAC pulses and, when activated, loads zero scale to all input and DAC registers and clears the output to 0 V."
},
{
"number": "10",
"name": "VOUTD",
"type": "output",
"description": "Analog output voltage from DAC D, with a rail-to-rail output amplifier."
},
{
"number": "11",
"name": "VOUTB",
"type": "output",
"description": "Analog output voltage from DAC B, with a rail-to-rail output amplifier."
},
{
"number": "12",
"name": "GND",
"type": "power_in",
"description": "Ground reference point for all circuitry on the device."
},
{
"number": "13",
"name": "SDA",
"type": "bidirectional",
"description": "Bidirectional open-drain serial data line, used with SCL to clock data into or out of the 16-bit input register, that should be pulled to the supply with an external pull-up resistor."
},
{
"number": "14",
"name": "SCL",
"type": "input",
"description": "Serial clock line used with SDA to clock data into or out of the 16-bit input register."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The ordering guide (page 34) lists AD5665RBRUZ-1 as a 14-lead TSSOP, package option RU-14, so the 14; Pin 7 is typed bidirectional because the datasheet defines it as either a reference input (default) ; The datasheet does not give a numbered pin 1 orientation beyond the TOP VIEW figure. The pin numbers"
],
"pages_sent": 15,
"cost_usd": 0.1005,
"at": "2026-10-30T20:48:55"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD5625R_5645R_5665R_5625_5665.pdf",
"pages": 35,
"sha256": "92ae60d05500e362",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ad5665rbruz-1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ad5665rbruz-1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e350b51b89a70209849040edda962d06b04c6f14c1ac9b639c2c2a81d48b61e9",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RU-14",
"source_page": 33,
"D": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"E1": {
"nom_mm": 4.4,
"range_mm": [
4.3,
4.5
]
},
"E": {
"nom_mm": 6.4,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.2,
"range_mm": [
null,
1.2
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ad5665rbruz-1.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}