Generated by kicad-footprint-generator · KiCad file format 20260206
AD5544ARSZ-REEL7
Analog Devices · Digital To Analog Converters (DACs) · SSOP-28-208mil
AD5544ARSZ-REEL7 from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGNDA | power_in | DAC A analog ground. |
| 2 | IOUTA | output | DAC A current output. |
| 3 | VREFA | input | DAC A reference voltage input that sets the full-scale output; the pin can be tied to VDD, and the reference input range is −15 V to +15 V. |
| 4 | RFBA | passive | DAC A feedback resistor connection, which must be connected to an external amplifier output to establish the DAC A voltage output. |
| 5 | MSB | input | MSB pin that must be set during a reset pulse (RS) or at power-on, tied to ground or VDD, to select reset to zero code (MSB = 0) or half-scale code (MSB = 1). |
| 6 | RS | input | Active-low reset input that sets the input and DAC registers to all 0s or half-scale code (0x8000 for AD5544, 0x2000 for AD5554) as determined by MSB. |
| 7 | VDD | power_in | Positive power supply input with specified operating range of 5 V ± 10% in the pin table, while the device supply range is stated as 2.7 V to 5.5 V. |
| 8 | CS | input | Active-low chip select that disables shift-register loading when high and transfers serial register data to the input register when CS/LDAC returns high. |
| 9 | CLK | input | Clock input where the positive edge clocks data into the shift register. |
| 10 | SDI | input | Serial data input that loads directly into the shift register. |
| 11 | RFBB | passive | DAC B feedback resistor connection, which must be connected to an external amplifier output to establish the DAC B voltage output. |
| 12 | VREFB | input | DAC B reference voltage input that sets the full-scale output; the pin can be tied to VDD, and the reference input range is −15 V to +15 V. |
| 13 | IOUTB | output | DAC B current output. |
| 14 | AGNDB | power_in | DAC B analog ground. |
| 15 | AGNDC | power_in | DAC C analog ground. |
| 16 | IOUTC | output | DAC C current output. |
| 17 | VREFC | input | DAC C reference voltage input that sets the full-scale output; the pin can be tied to VDD, and the reference input range is −15 V to +15 V. |
| 18 | RFBC | passive | DAC C feedback resistor connection, which must be connected to an external amplifier output to establish the DAC C voltage output. |
| 19 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 20 | SDO | output | Serial data output that allows daisy-chaining; data appears at SDO after 19 clock pulses for AD5544 or 17 clock pulses for AD5554 following SDI input. |
| 21 | LDAC | input | Level-sensitive active-low load DAC strobe that asynchronously transfers all input register data to the DAC registers. |
| 22 | AGNDF | power_in | High-current analog force ground. |
| 23 | VSS | power_in | Negative bias power supply input with specified operating range of −5.5 V to +0.3 V. |
| 24 | DGND | power_in | Digital ground pin. |
| 25 | RFBD | passive | DAC D feedback resistor connection, which must be connected to an external amplifier output to establish the DAC D voltage output. |
| 26 | VREFD | input | DAC D reference voltage input that sets the full-scale output; the pin can be tied to VDD, and the reference input range is −15 V to +15 V. |
| 27 | IOUTD | output | DAC D current output. |
| 28 | AGNDD | power_in | DAC D analog ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-28-208mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy INL (AD5544ARSZ) | INL | -2 | 2 | LSB | 4 | ||
| Differential Nonlinearity (AD5544ARSZ) | DNL | -1.5 | 1.5 | LSB | 4 | ||
| Full-Scale Gain Error | GFSE | -3 | 0.75 | 3 | mV | Data = 0xFFFF | 4 |
| Output Current | IOUTx | 1.25 | 2.5 | mA | Data = 0xFFFF | 4 | |
| Output Leakage Current | IOUTx | 10 | nA | Data = 0x0000, TA = 25°C | 4 | ||
| Output Leakage Current | IOUTx | 20 | nA | Data = 0x0000, TA = 85°C | 4 | ||
| Feedback Resistor | RFBx | 4 | 6 | 8 | kΩ | VDD = 5 V | 4 |
| VREFx Range | VREFx | -15 | 15 | V | 4 | ||
| Input Resistance | RREFx | 4 | 6 | 8 | kΩ | 4 | |
| Input Resistance Match | RREFx | 0.35 | % | Channel-to-channel | 4 | ||
| Input Capacitance | CREFx | 5 | pF | 4 | |||
| Output Capacitance | COUTx | 35 | pF | Code dependent | 4 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | 4 | |||
| Logic Input High Voltage | VIH | 2.4 | V | 4 | |||
| Input Leakage Current | IIL | 1 | µA | 4 | |||
| Input Capacitance (logic) | CIL | 10 | pF | 4 | |||
| Logic Output Low Voltage | VOL | 0.4 | V | IOL = 1.6 mA | 4 | ||
| Logic Output High Voltage | VOH | 4 | V | IOH = 100 µA | 4 | ||
| Clock Width High | tCH | 25 | ns | 4 | |||
| Clock Width Low | tCL | 25 | ns | 4 | |||
| CS to Clock Setup | tCSS | 0 | ns | 4 | |||
| Clock to CS Hold | tCSH | 25 | ns | 4 | |||
| Clock to SDO Propagation Delay | tPD | 20 | ns | 4 | |||
| Load DAC Pulse Width | tLDAC | 25 | ns | 4 | |||
| Data Setup | tDS | 20 | ns | 4 | |||
| Data Hold | tDH | 20 | ns | 4 | |||
| Load Setup | tLDS | 5 | ns | 4 | |||
| Load Hold | tLDH | 25 | ns | 4 | |||
| Power Supply Range | VDD RANGE | 2.7 | 5.5 | V | 4 | ||
| Positive Supply Current | IDD | 5 | µA | Logic inputs = 0 V | 4 | ||
| Negative Supply Current | ISS | 0.001 | 9 | µA | Logic inputs = 0 V, VSS = −5 V | 4 | |
| Power Dissipation | PDISS | 1.25 | mW | Logic inputs = 0 V | 5 | ||
| Power Supply Sensitivity | PSS | 0.006 | %/% | ΔVDD = ±5% | 5 | ||
| Output Voltage Settling Time | tS | 0.9 | µs | To ±0.1% of full scale, data = 0x0000 to 0xFFFF to 0x0000 | 5 | ||
| Feedthrough Error | VOUTx/VREFx | -65 | dB | Data = 0x0000, VREFx = 100 mV rms, f = 100 kHz | 5 | ||
| Crosstalk Error | VOUTA/VREFB | -90 | dB | Data = 0x0000, VREFB = 100 mV rms, adjacent channel, f = 100 kHz | 5 | ||
| VDD to GND | VDD | -0.3 | 8 | V | 8 | ||
| VSS to GND | VSS | -7 | 0.3 | V | 8 | ||
| VREFx to GND | VREFx | -18 | 18 | V | 8 | ||
| Logic Input and Output to GND | -0.3 | 8 | V | 8 | |||
| V(IOUTx) to GND (upper limit printed as VDD + 0.3 V) | V(IOUTx) | -0.3 | V | Upper limit printed as VDD + 0.3 | 8 | ||
| AGNDx to DGND | -0.3 | 0.3 | V | 8 | |||
| Input Current to Any Pin Except Supplies | -50 | 50 | mA | 8 | |||
| Maximum Junction Temperature (TJ Max) | TJ | 150 | °C | 8 | |||
| Storage Temperature Range | -65 | 150 | °C | 8 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 8 | ||
| Lead Temperature, Vapor Phase | 215 | °C | Vapor phase, 60 sec | 8 | |||
| Lead Temperature, Infrared | 220 | °C | Infrared, 15 sec | 8 | |||
| Thermal Resistance θJA | θJA | 100 | °C/W | 28-Lead SSOP | 8 | ||
| Negative Bias Supply Range | VSS | -5.5 | 0.3 | V | Specified range of operation | 10 |
CAD (KiCad official)
- Symbol:
AD5544ARSZ-REEL7 - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
ad5544arsz-etched.step/ad5544arsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5544arsz.step/ad5544arsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
251fe163e6306ba8, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).