component
AD5391BSTZ-5
Public Made by Adomby adom
Analog Devices Digital To Analog Converters (DACs), LQFP-52(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
AD5391BSTZ-5
Analog Devices · Digital To Analog Converters (DACs) · LQFP-52(10x10)
AD5391BSTZ-5 from Analog Devices, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Asynchronous clear input, falling edge sensitive; while low all LDAC pulses are ignored and all channels are updated with the CLR code register data. |
| 2 | NC | unconnected | No connect; no internal connection. |
| 3 | NC | unconnected | No connect; no internal connection. |
| 4 | REF_GND | power_in | Ground reference point for the internal reference; connect to AGND. |
| 5 | REFOUT/REFIN | bidirectional | Reference output when the internal reference is selected, or external reference input (default) when the internal reference is disabled via the control register. |
| 6 | SIGNAL_GND 1 | power_in | Analog ground reference point for the first group of eight output channels; tied internally to all SIGNAL_GND pins and connected to the AGND plane. |
| 7 | DAC_GND 1 | power_in | Ground reference point for the internal 14-bit DACs of the first group of eight channels; connect to the AGND plane. |
| 8 | AVDD 1 | power_in | Analog supply pin for the first group of eight channels, operating range 5 V ± 10%, decoupled with 0.1 uF ceramic and 10 uF tantalum capacitors. |
| 9 | VOUT 0 | output | Buffered rail-to-rail analog output for Channel 0, gain of 2, capable of driving a 5 kΩ load to ground. |
| 10 | VOUT 1 | output | Buffered rail-to-rail analog output for Channel 1, gain of 2, capable of driving a 5 kΩ load to ground. |
| 11 | VOUT 2 | output | Buffered rail-to-rail analog output for Channel 2, gain of 2, capable of driving a 5 kΩ load to ground. |
| 12 | VOUT 3 | output | Buffered rail-to-rail analog output for Channel 3, gain of 2, capable of driving a 5 kΩ load to ground. |
| 13 | VOUT 4 | output | Buffered rail-to-rail analog output for Channel 4, gain of 2, capable of driving a 5 kΩ load to ground. |
| 14 | AGND 1 | power_in | Analog ground reference point for the first group of eight channels; connect externally to the AGND plane. |
| 15 | VOUT 5 | output | Buffered rail-to-rail analog output for Channel 5, gain of 2, capable of driving a 5 kΩ load to ground. |
| 16 | VOUT 6 | output | Buffered rail-to-rail analog output for Channel 6, gain of 2, capable of driving a 5 kΩ load to ground. |
| 17 | VOUT 7 | output | Buffered rail-to-rail analog output for Channel 7, gain of 2, capable of driving a 5 kΩ load to ground. |
| 18 | MON_IN 1 | input | Monitor input pin for an external signal (within device maximum ratings) that can be switched to MON_OUT via software. |
| 19 | MON_IN 2 | input | Monitor input pin for an external signal (within device maximum ratings) that can be switched to MON_OUT via software. |
| 20 | MON_OUT | output | Analog output of a 16-to-1 channel multiplexer that can route any channel output to the pin, with typical output impedance of 500 Ω, intended to drive a high-impedance input such as a SAR ADC. |
| 21 | VOUT 8 | output | Buffered rail-to-rail analog output for Channel 8, gain of 2, capable of driving a 5 kΩ load to ground. |
| 22 | VOUT 9 | output | Buffered rail-to-rail analog output for Channel 9, gain of 2, capable of driving a 5 kΩ load to ground. |
| 23 | VOUT 10 | output | Buffered rail-to-rail analog output for Channel 10, gain of 2, capable of driving a 5 kΩ load to ground. |
| 24 | VOUT 11 | output | Buffered rail-to-rail analog output for Channel 11, gain of 2, capable of driving a 5 kΩ load to ground. |
| 25 | VOUT 12 | output | Buffered rail-to-rail analog output for Channel 12, gain of 2, capable of driving a 5 kΩ load to ground. |
| 26 | DAC_GND 2 | power_in | Ground reference point for the internal DACs of the second group of eight channels; connect to the AGND plane. |
| 27 | SIGNAL_GND 2 | power_in | Analog ground reference point for the second group of eight output channels; tied internally to all SIGNAL_GND pins and connected to the AGND plane. |
| 28 | VOUT 13 | output | Buffered rail-to-rail analog output for Channel 13, gain of 2, capable of driving a 5 kΩ load to ground. |
| 29 | VOUT 14 | output | Buffered rail-to-rail analog output for Channel 14, gain of 2, capable of driving a 5 kΩ load to ground. |
| 30 | VOUT 15 | output | Buffered rail-to-rail analog output for Channel 15, gain of 2, capable of driving a 5 kΩ load to ground. |
| 31 | AGND 2 | power_in | Analog ground reference point for the second group of eight channels; connect externally to the AGND plane. |
| 32 | AVDD 2 | power_in | Analog supply pin for the second group of eight channels, operating range 5 V ± 10%, decoupled with 0.1 uF ceramic and 10 uF tantalum capacitors. |
| 33 | NC | unconnected | No connect; no internal connection. |
| 34 | NC | unconnected | No connect; no internal connection. |
| 35 | NC | unconnected | No connect; no internal connection. |
| 36 | NC | unconnected | No connect; no internal connection. |
| 37 | RESET | input | Asynchronous digital reset input, falling edge sensitive, resetting the x1, m, c and x2 registers to power-on defaults in 270 µs maximum while BUSY goes low. |
| 38 | BUSY | output | Digital CMOS output that goes low during internal calculations, power-on reset, RESET low and CLR operation, during which the interface is disabled or DAC updates are held. |
| 39 | LDAC | input | Active-low load DAC logic input that transfers input registers to the DAC registers and updates the outputs; if BUSY is low the event is stored. |
| 40 | DCEN/AD1 | input | Daisy-chain select input (active high) in serial interface mode; hardware address pin used with AD0 in I2C mode. |
| 41 | PD | input | Power-down input (level-sensitive, active high) placing the device in low power mode, with 1 µA analog and 20 µA digital current; serial interface remains active. |
| 42 | SYNC/AD0 | input | Frame synchronization input for the serial interface, enabling the clock counter when taken low; acts as a hardware address pin in I2C mode. |
| 43 | SPI/I2C | input | Interface select input: low selects I2C mode, high selects SPI mode. |
| 44 | DGND | power_in | Ground for all digital circuitry. |
| 45 | DVDD | power_in | Logic power supply, guaranteed operating range 2.7 V to 5.5 V, decoupled with 0.1 µF ceramic and 10 µF tantalum capacitors to DGND. |
| 46 | DVDD | power_in | Logic power supply, guaranteed operating range 2.7 V to 5.5 V, decoupled with 0.1 µF ceramic and 10 µF tantalum capacitors to DGND. |
| 47 | DGND | power_in | Ground for all digital circuitry. |
| 48 | DVDD | power_in | Logic power supply, guaranteed operating range 2.7 V to 5.5 V, decoupled with 0.1 µF ceramic and 10 µF tantalum capacitors to DGND. |
| 49 | SDO | tri_state | Three-state CMOS serial data output for daisy-chaining, clocked out on the rising edge of SCLK and valid on the falling edge. |
| 50 | SCLK/SCL | input | Serial clock input in SPI mode operating up to 50 MHz; SCL clock input in I2C mode compatible with 100 kHz and 400 kHz. |
| 51 | DIN/SDA | bidirectional | Serial data input in SPI mode (valid on falling edge of SCLK); open-drain serial data input/output (SDA) in I2C mode. |
| 52 | DGND | power_in | Ground for all digital circuitry. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFP-52(10x10) |
| Category | ADC/DAC/Data Conversion |
| Pins | 52 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy (INL), AD5391-5 | INL | -1 | 1 | LSB | 5 | ||
| Differential Nonlinearity (DNL), AD5391-5 | DNL | -1 | 1 | LSB | Guaranteed monotonic over temperature | 5 | |
| Zero-Scale Error | 4 | mV | 5 | ||||
| Offset Error | -4 | 4 | mV | Measured at Code 32 in the linear region (AD5390-5/AD5391-5); measured at Code 8 in the linear region (AD5391-5) | 5 | ||
| Gain Error | -0.05 | 0.05 | % FSR | At 25°C | 5 | ||
| Gain Error | -0.06 | 0.06 | % FSR | TMIN to TMAX | 5 | ||
| DC Crosstalk | 1 | LSB | 5 | ||||
| Reference Input Voltage accuracy | REFIN | -1 | 1 | % | ±1% for specified performance, AVDD = 2 × REFIN + 50 mV | 5 | |
| DC Input Impedance (reference input) | 1 | MΩ | 5 | ||||
| Input Current (reference input) | -1 | 1 | µA | 5 | |||
| Reference Range | 1 | V | 5 | ||||
| Reference Output Voltage (2.5 V setting) | 2.495 | 2.505 | V | At ambient, optimized for 2.5 V operation | 5 | ||
| Reference Output Voltage (1.25 V setting) | 1.22 | 1.28 | V | At ambient when 1.25 V reference is selected | 5 | ||
| Reference TC | -10 | 10 | ppm | Temperature range: 25°C to 85°C | 5 | ||
| Reference TC | -15 | 15 | ppm | Temperature range: −40°C to +85°C | 5 | ||
| Output Voltage Range | VOUT | 0 | V | Accuracy guaranteed from VOUT = 10 mV to AVDD − 50 mV | 5 | ||
| Short-Circuit Current | 40 | mA | 5 | ||||
| Load Current | -1 | 1 | mA | 5 | |||
| Capacitive Load Stability | 200 | pF | RL = ∞ | 5 | |||
| Capacitive Load Stability | 1000 | pF | RL = 5 kΩ | 5 | |||
| DC Output Impedance | 0.6 | Ω | 5 | ||||
| VIH, Input High Voltage | VIH | 2 | V | DVDD = 2.7 V to 5.5 V | 5 | ||
| VIL, Input Low Voltage | VIL | 0.8 | V | DVDD > 3.6 V | 5 | ||
| VIL, Input Low Voltage | VIL | 0.6 | V | DVDD ≤ 3.6 V | 5 | ||
| Input Current (logic inputs) | -10 | 10 | µA | Total for all pins, TA = TMIN to TMAX | 5 | ||
| Pin Capacitance | 10 | pF | 5 | ||||
| Input Leakage Current (SCL, SDA) | IIN | -1 | 1 | µA | 6 | ||
| Glitch Rejection | 50 | ns | Input filtering suppresses noise spikes of <50 ns | 6 | |||
| Output Low Voltage (BUSY, SDO) | VOL | 0.4 | V | DVDD = 5 V ± 10%, sinking 200 µA | 6 | ||
| High Impedance Leakage Current | -1 | 1 | µA | 6 | |||
| Output Low Voltage (SDA) | VOL | 0.4 | V | ISINK = 3 mA | 6 | ||
| Output Low Voltage (SDA) | VOL | 0.6 | V | ISINK = 6 mA | 6 | ||
| Three-State Leakage Current (SDA) | -1 | 1 | µA | 6 | |||
| Analog Supply Voltage | AVDD | 4.5 | 5.5 | V | 6 | ||
| Digital Supply Voltage | DVDD | 2.7 | 5.5 | V | 6 | ||
| Analog Supply Current (AIDD) | AIDD | 0.375 | mA/channel | Outputs unloaded, boost off | 6 | ||
| Analog Supply Current (AIDD) | AIDD | 0.475 | mA/channel | Outputs unloaded, boost on | 6 | ||
| Digital Supply Current (DIDD) | DIDD | 1 | mA | VIH = DVDD, VIL = DGND | 6 | ||
| Analog Supply Current in Power-Down | AIDD (Power-Down) | 20 | µA | 6 | |||
| Digital Supply Current in Power-Down | DIDD (Power-Down) | 20 | µA | 6 | |||
| Power Dissipation | 35 | mW | AD5390/AD5391 with outputs unloaded, AVDD = DVDD = 5 V, boost off | 6 | |||
| Output Voltage Settling Time (AD5391) | 8 | µs | Boost mode off, CR11 = 0 | 7 | |||
| AVDD to AGND | AVDD | -0.3 | 7 | V | 14 | ||
| DVDD to DGND | DVDD | -0.3 | 7 | V | 14 | ||
| VREF to AGND | VREF | -0.3 | 7 | V | 14 | ||
| REFOUT to AGND | REFOUT | -0.3 | 7 | V | 14 | ||
| AGND to DGND | -0.3 | 0.3 | V | 14 | |||
| Operating Temperature Range (Commercial B Version) | TA | -40 | 85 | °C | 14 | ||
| Storage Temperature Range | -65 | 150 | °C | 14 | |||
| Junction Temperature (TJ max) | TJ | 150 | °C | 14 | |||
| Offset Error TC | -5 | 5 | 5 | µV/°C | 5 | ||
| Gain Temperature Coefficient | 2 | ppm FSR/°C | 5 | ||||
| Reference Output Impedance | 800 | Ω | 5 | ||||
| Power Supply Sensitivity (∆Midscale/∆AVDD) | -85 | dB | 6 | ||||
| Output Voltage Settling Time (AD5391) | 3 | µs | Boost mode off, CR11 = 0 | 7 | |||
| Slew Rate | 2.5 | V/µs | Boost mode on | 7 | |||
| Slew Rate | 1.5 | V/µs | Boost mode off | 7 | |||
| Digital-to-Analog Glitch Energy | 12 | nV-s | 7 | ||||
| Thermal Resistance Junction-to-Ambient, 52-lead LQFP | θJA | 38 | °C/W | 14 |
CAD (KiCad official)
- Symbol:
AD5391BSTZ-5 - Footprint:
Package_QFP:LQFP-52_10x10mm_P0.65mm - 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
- 3D model files:
ad5391bstz-5-etched.step/ad5391bstz-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5391bstz-5.step/ad5391bstz-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (44 pp, sha256
6160235d6086dd4b, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).