component
AD5282BRUZ20-REEL7
Public Made by Adomby adom
Analog Devices Digital Potentiometers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+14−11@@ -44,7 +44,7 @@ "number": "2", "name": "A1", "type": "passive",- "description": "Resistor Terminal A1 for the first variable resistor element, operating between VSS and VDD with maximum continuous current rating of \u00b15 mA."+ "description": "Resistor Terminal A1 for the first variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA." }, { "number": "3",@@ -56,31 +56,31 @@ "number": "4", "name": "B1", "type": "passive",- "description": "Resistor Terminal B1 for the first variable resistor element, operating between VSS and VDD with maximum continuous current rating of \u00b15 mA."+ "description": "Resistor Terminal B1 for the first variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive power supply input specified for operation from +5 V to +15 V in single supply mode or +4.5 V to +5.5 V in dual supply mode with VSS, with sum of |VDD| + |VSS| \u2264 15 V."+ "description": "Positive power supply input specified for operation from +5 V to +15 V in single supply mode or +4.5 V to +5.5 V in dual supply mode with VSS, with sum of |VDD| + |VSS| ≤ 15 V." }, { "number": "6", "name": "SHDN", "type": "input",- "description": "Active low asynchronous shutdown control pin that opens terminal A and connects wiper to terminal B while maintaining register contents and drawing 5 \u03bcA supply current."+ "description": "Active low asynchronous shutdown control pin that opens terminal A and connects wiper to terminal B while maintaining register contents and drawing 5 μA supply current." }, { "number": "7", "name": "SCL", "type": "input",- "description": "Serial clock input for I2C-compatible interface with maximum frequency of 400 kHz and input logic thresholds of 0.7 \u00d7 VL (high) and 0.3 \u00d7 VL (low)."+ "description": "Serial clock input for I2C-compatible interface with maximum frequency of 400 kHz and input logic thresholds of 0.7 × VL (high) and 0.3 × VL (low)." }, { "number": "8", "name": "SDA", "type": "bidirectional",- "description": "Serial data input/output bidirectional pin for I2C-compatible interface with open-drain configuration and input logic thresholds of 0.7 \u00d7 VL (high) and 0.3 \u00d7 VL (low)."+ "description": "Serial data input/output bidirectional pin for I2C-compatible interface with open-drain configuration and input logic thresholds of 0.7 × VL (high) and 0.3 × VL (low)." }, { "number": "9",@@ -104,19 +104,19 @@ "number": "12", "name": "VSS", "type": "power_in",- "description": "Negative power supply input specified for operation from 0 V to \u22125 V in single supply mode or \u22125.5 V to \u22124.5 V in dual supply mode with VDD, with sum of |VDD| + |VSS| \u2264 15 V."+ "description": "Negative power supply input specified for operation from 0 V to −5 V in single supply mode or −5.5 V to −4.5 V in dual supply mode with VDD, with sum of |VDD| + |VSS| ≤ 15 V." }, { "number": "13", "name": "VL", "type": "power_in",- "description": "Logic supply voltage that must be \u2264 VDD and equal to the digital logic voltage, with typical supply current of 60 \u03bcA at 5 V."+ "description": "Logic supply voltage that must be ≤ VDD and equal to the digital logic voltage, with typical supply current of 60 μA at 5 V." }, { "number": "14", "name": "B2", "type": "passive",- "description": "Resistor Terminal B2 for the second variable resistor element, operating between VSS and VDD with maximum continuous current rating of \u00b15 mA."+ "description": "Resistor Terminal B2 for the second variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA." }, { "number": "15",@@ -128,7 +128,7 @@ "number": "16", "name": "A2", "type": "passive",- "description": "Resistor Terminal A2 for the second variable resistor element, operating between VSS and VDD with maximum continuous current rating of \u00b15 mA."+ "description": "Resistor Terminal A2 for the second variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA." } ], "provenance": {@@ -206,5 +206,8 @@ "docs/ad5282bruz20-reel7-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }