component
AD5282BRUZ20-REEL7
Public Made by Adomby adom
Analog Devices Digital Potentiometers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAD5282BRUZ20-REEL7
Analog Devices · Digital Potentiometers · TSSOP-16
AD5282BRUZ20-REEL7 from Analog Devices, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | O1 | output | Logic output terminal O1 that can be programmed to drive digital loads and logic gates with output voltage range of 0.4 V (low) to 4.9 V (high). |
| 2 | A1 | passive | Resistor Terminal A1 for the first variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA. |
| 3 | W1 | passive | Wiper terminal W1 of the first variable resistor element, producing variable output voltage in potentiometer divider mode or variable resistance in rheostat mode. |
| 4 | B1 | passive | Resistor Terminal B1 for the first variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA. |
| 5 | VDD | power_in | Positive power supply input specified for operation from +5 V to +15 V in single supply mode or +4.5 V to +5.5 V in dual supply mode with VSS, with sum of |
| 6 | SHDN | input | Active low asynchronous shutdown control pin that opens terminal A and connects wiper to terminal B while maintaining register contents and drawing 5 μA supply current. |
| 7 | SCL | input | Serial clock input for I2C-compatible interface with maximum frequency of 400 kHz and input logic thresholds of 0.7 × VL (high) and 0.3 × VL (low). |
| 8 | SDA | bidirectional | Serial data input/output bidirectional pin for I2C-compatible interface with open-drain configuration and input logic thresholds of 0.7 × VL (high) and 0.3 × VL (low). |
| 9 | AD0 | input | Programmable address bit 0 for I2C slave address selection, allowing up to four AD5282 devices on one I2C bus when used with AD1. |
| 10 | AD1 | input | Programmable address bit 1 for I2C slave address selection, allowing up to four AD5282 devices on one I2C bus when used with AD0. |
| 11 | GND | power_in | Common ground reference pin providing the reference potential for all supply and signal connections. |
| 12 | VSS | power_in | Negative power supply input specified for operation from 0 V to −5 V in single supply mode or −5.5 V to −4.5 V in dual supply mode with VDD, with sum of |
| 13 | VL | power_in | Logic supply voltage that must be ≤ VDD and equal to the digital logic voltage, with typical supply current of 60 μA at 5 V. |
| 14 | B2 | passive | Resistor Terminal B2 for the second variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA. |
| 15 | W2 | passive | Wiper terminal W2 of the second variable resistor element, producing variable output voltage in potentiometer divider mode or variable resistance in rheostat mode. |
| 16 | A2 | passive | Resistor Terminal A2 for the second variable resistor element, operating between VSS and VDD with maximum continuous current rating of ±5 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
AD5282BRUZ20-REEL7 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ad5282bruz20-reel7-etched.step/ad5282bruz20-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5282bruz20-reel7.step/ad5282bruz20-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
096352521717c48f, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).