component
AD5262BRUZ20-RL7
Public Made by Adomby adom
Analog Devices Digital Potentiometers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAD5262BRUZ20-RL7
Analog Devices · Digital Potentiometers · TSSOP-16
AD5262BRUZ20-RL7 from Analog Devices, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO | tri_state | Serial data output; open-drain transistor requires external pull-up resistor for daisy-chain operation. |
| 2 | A1 | passive | End A terminal of RDAC 1; voltage range VSS to VDD. |
| 3 | W1 | passive | Wiper (cursor) terminal of RDAC 1 selected when address bit A0 = 0; voltage range VSS to VDD. |
| 4 | B1 | passive | End B terminal of RDAC 1; voltage range VSS to VDD. |
| 5 | VDD | power_in | Positive power supply; rated 5 V or 15 V operation with |
| 6 | SHDN | input | Active-low shutdown control input; opens end A and connects wiper W to end B for minimal quiescent current. |
| 7 | CLK | input | Serial clock input, rising-edge triggered; maximum frequency 25 MHz for SPI-compatible interface. |
| 8 | SDI | input | Serial data input; MSB-first 9-bit transfers with address bit A0 followed by 8 data bits for SPI interface. |
| 9 | CS | input | Chip select input, active-low; data latches to target RDAC register on rising edge based on address bit A0. |
| 10 | PR | input | Active-low preset input; forces all RDAC registers to 0x80 to set cursor to midscale position. |
| 11 | GND | power_in | Digital ground reference; connects to PCB common ground for digital circuit return path. |
| 12 | VSS | power_in | Negative power supply; rated 0 V or -5 V operation with |
| 13 | VL | power_in | Logic supply voltage; 2.7 V to 5.5 V range; must equal control microcontroller logic voltage level. |
| 14 | B2 | passive | End B terminal of RDAC 2; voltage range VSS to VDD. |
| 15 | W2 | passive | Wiper (cursor) terminal of RDAC 2 selected when address bit A0 = 1; voltage range VSS to VDD. |
| 16 | A2 | passive | End A terminal of RDAC 2; voltage range VSS to VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
AD5262BRUZ20-RL7 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ad5262bruz20-rl7-etched.step/ad5262bruz20-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5262bruz20-rl7.step/ad5262bruz20-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
93e68d0836e617e1, retrieved 2026-09-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).