component
AD4054
Public Made by Adomby adom
IDCHIP Battery Management ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| ad4054-etched.glb | 10d ago |
| ad4054-etched.step | 10d ago |
| ad4054-hero.glb | 10d ago |
| ad4054-hero.overlay.json | 10d ago |
| ad4054.glb | 10d ago |
| ad4054.kicad_mod | 10d ago |
| ad4054.kicad_sym | 10d ago |
| ad4054.lbr | 10d ago |
| ad4054.step | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
AD4054
IDCHIP · Battery Management ICs · SOT-23-5
AD4054 from IDCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output pulled low by an internal N-channel MOSFET during charging, with a weak ~20uA pull-down at end of charge and high impedance when undervoltage lockout is detected. |
| 2 | GND | power_in | Power ground. |
| 3 | BAT | power_out | Charge current output to the battery that regulates the final float voltage to 4.2V via a precision internal resistor divider, which is disconnected in shutdown mode. |
| 4 | VCC | power_in | Input supply of 4.25V-5.5V that should be bypassed with at least a 1uF capacitor, and the charger enters shutdown when VCC falls to within 30mV of the BAT voltage, reducing IBAT below 2uA. |
| 5 | PROG | bidirectional | Charge current program, charge current monitor and shutdown pin: a 1% resistor RPROG to ground sets the current, the pin is held at 1V in constant-current mode with IBAT=(VPROG/RPROG)*800, and a 1.22V shutdown threshold (2.5uA pull-up when RPROG is removed) puts the charger in shutdown with supply current of 45uA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | IDCHIP |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VCC | 4.3 | 5 | 5.5 | V | 4 | |
| Float voltage | VFLOAT | 4.15 | 4.2 | 4.242 | V | 0℃≤TA≤85℃ | 4 |
| BAT pin current, current mode | IBAT | 100 | 110 | 120 | mA | RPROG=2.4K, current mode | 4 |
| BAT pin current, current mode | IBAT | 475 | 500 | 520 | mA | RPROG=1.2K, current mode | 4 |
| Trickle charge current | ITRIKL | 20 | 50 | 70 | mA | VBAT<VTRIKL, RPROG=1.2K | 4 |
| Trickle charge threshold voltage | VTRIKL | 2.8 | 2.9 | 3 | V | RPROG=1.2K, VBAT rising | 4 |
| Trickle charge hysteresis voltage | VTRHYS | 60 | 80 | 100 | mV | RPROG=1.2K | 4 |
| VCC undervoltage lockout threshold | VUV | 3.5 | 3.7 | 3.9 | V | VCC from low to high | 4 |
| VCC undervoltage lockout hysteresis | VUVHYS | 150 | 200 | 300 | mV | 4 | |
| VCC-VBAT lockout threshold voltage | VASD | 60 | 100 | 140 | mV | VCC from low to high | 4 |
| VCC-VBAT lockout threshold voltage | VASD | 5 | 30 | 50 | mV | VCC from high to low | 4 |
| C/10 termination current threshold | ITERM | 60 | 70 | 80 | mA | 4 | |
| C/10 termination current threshold | ITERM | 120 | 130 | 140 | mA | 4 | |
| PROG pin voltage | VPROG | 0.9 | 1 | 1.1 | V | RPROG=1.2K, current mode | 4 |
| CHRG pin output low voltage | VCHRG | 0.1 | 0.35 | 0.6 | V | ICHRG=5mA | 4 |
| CHRG pin weak pull-down current | ICHRG | 7 | 12 | 20 | uA | VCHRG=5V | 4 |
| Recharge battery threshold voltage | ΔVRECHRG | 100 | 150 | 200 | mA | VFLOAT-VRECHRG | 4 |
| Recharge comparator filter time | tRECHARGE | 0.8 | 1.8 | 4 | ms | VBAT high to low | 4 |
| Termination comparator filter time | tTERM | 0.8 | 1.8 | 4 | ms | IBAT falls below ICHG/10 | 4 |
| Supply current, charge mode | ICC | 150 | 500 | µA | Charge mode, RPROG=1.2K | 4 | |
| Junction temperature in thermal limiting | TLIM | 145 | ℃ | 4 | |||
| Power FET on resistance | RON | 500 | mΩ | between VCC and BAT | 4 | ||
| Soft-start time | tss | 20 | µs | IBAT=0, IBAT=1200v/RPROG | 4 | ||
| PROG pin pull-up current | IPROG | 2 | µA | 4 | |||
| Input supply voltage (abs max) | VCC | 4.2 | 5.5 | V | printed as 4.2~5.5V | 3 | |
| PROG pin voltage (abs max) | PROG | -0.3 | V | -0.3 ~ VCC+0.3V | 3 | ||
| BAT pin voltage (abs max) | BAT | -0.3 | 5 | V | 3 | ||
| CHRG pin voltage (abs max) | CHRG | -0.3 | 5 | V | 3 | ||
| BAT pin current (abs max) | 600 | mA | 3 | ||||
| PROG pin current (abs max) | 600 | uA | 3 | ||||
| Maximum junction temperature | 145 | ℃ | 3 | ||||
| Operating ambient temperature range | -40 | 85 | ℃ | 3 | |||
| Storage temperature range | -65 | 125 | ℃ | 3 | |||
| Lead temperature | 260 | ℃ | soldering 10 seconds | 3 |
CAD (KiCad official)
- Symbol:
AD4054 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ad4054-etched.step/ad4054-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad4054.step/ad4054.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: IDCHIP datasheet (6 pp, sha256
c28dca5e0529651b, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).