component
ACSL-6400-00TE
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownACSL-6400-00TE
Broadcom AVAGO · Logic Output Optoisolators · SO-16
ACSL-6400-00TE from Broadcom AVAGO, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE1 | input | LED anode for channel 1; the input is ON at a forward current of 7 mA to 15 mA, and the average forward input current must not exceed 15 mA. |
| 2 | CATHODE1 | input | LED cathode for channel 1; the input reverse voltage must not exceed 5 V, and an anti-parallel diode is recommended if reverse transients are possible. |
| 3 | ANODE2 | input | LED anode for channel 2; the input is ON at a forward current of 7 mA to 15 mA, and the average forward input current must not exceed 15 mA. |
| 4 | CATHODE2 | input | LED cathode for channel 2; the input reverse voltage must not exceed 5 V, and an anti-parallel diode is recommended if reverse transients are possible. |
| 5 | ANODE3 | input | LED anode for channel 3; the input is ON at a forward current of 7 mA to 15 mA, and the average forward input current must not exceed 15 mA. |
| 6 | CATHODE3 | input | LED cathode for channel 3; the input reverse voltage must not exceed 5 V, and an anti-parallel diode is recommended if reverse transients are possible. |
| 7 | ANODE4 | input | LED anode for channel 4; the input is ON at a forward current of 7 mA to 15 mA, and the average forward input current must not exceed 15 mA. |
| 8 | CATHODE4 | input | LED cathode for channel 4; the input reverse voltage must not exceed 5 V, and an anti-parallel diode is recommended if reverse transients are possible. |
| 9 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor should be connected as close as possible between VDD and GND. |
| 10 | VDD | power_in | Output-side supply; the recommended supply range is 3.0 V to 5.5 V, with 7 V as the 1-minute absolute maximum. |
| 11 | VO4 | output | Open-collector output for channel 4, inverted relative to the input; the sink current should not exceed 13 mA to keep VOL at or below 0.6 V, and the recommended maximum output voltage is 5.5 V. |
| 12 | VO3 | output | Open-collector output for channel 3, inverted relative to the input; the sink current should not exceed 13 mA to keep VOL at or below 0.6 V, and the recommended maximum output voltage is 5.5 V. |
| 13 | VO2 | output | Open-collector output for channel 2, inverted relative to the input; the sink current should not exceed 13 mA to keep VOL at or below 0.6 V, and the recommended maximum output voltage is 5.5 V. |
| 14 | VO1 | output | Open-collector output for channel 1, inverted relative to the input; the sink current should not exceed 13 mA to keep VOL at or below 0.6 V, and the recommended maximum output voltage is 5.5 V. |
| 15 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor should be connected as close as possible between VDD and GND. |
| 16 | VDD | power_in | Output-side supply; the recommended supply range is 3.0 V to 5.5 V, with 7 V as the 1-minute absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SO-16 |
| Category | Optoisolators |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Threshold Current | ITH | 2.7 | 7 | mA | 3.3V table (3.0V≤VDD≤3.6V): IOL(Sinking)=13 mA, VO=0.6V | 11 | |
| High Level Output Current | IOH | 4.7 | 100 | µA | 3.3V table (3.0V≤VDD≤3.6V): IF=250 µA, VO=3.3V | 11 | |
| Low Level Output Voltage | VOL | 0.36 | 0.68 | V | 3.3V table (3.0V≤VDD≤3.6V): IOL(Sinking)=13 mA, IF=7 mA | 11 | |
| High Level Supply Current (per channel) | IDDH | 3.2 | 5 | mA | 3.3V table (3.0V≤VDD≤3.6V): IF=0 mA | 11 | |
| Low Level Supply Current (per channel) | IDDL | 4.6 | 7.5 | mA | 3.3V table (3.0V≤VDD≤3.6V): IF=10 mA | 11 | |
| Input Forward Voltage | VF | 1.25 | 1.52 | 1.8 | V | 3.3V table (3.0V≤VDD≤3.6V): IF=10 mA, TA=25°C | 11 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | 3.3V table (3.0V≤VDD≤3.6V): IR=10 µA | 11 | ||
| Logic High Common Mode Transient Immunity | /CMH/ | 10 | kV/µs | 3.3V table (3.0V≤VDD≤3.6V): Vcm=1000V, IF=0 mA, VO=2.0V, RL=350Ω, TA=25°C | 11 | ||
| Logic Low Common Mode Transient Immunity | /CML/ | 10 | kV/µs | 3.3V table (3.0V≤VDD≤3.6V): Vcm=1000V, IF=8 mA, VO=0.8V, RL=350Ω, TA=25°C | 11 | ||
| Maximum Data Rate | 10 | 15 | MBd | 3.3V table (3.0V≤VDD≤3.6V), IF=8.0 mA: RL=350Ω, CL=15 pF | 11 | ||
| Pulse Width | tPW | 100 | ns | 3.3V table (3.0V≤VDD≤3.6V), IF=8.0 mA: RL=350Ω, CL=15 pF | 11 | ||
| Propagation Delay Time to Logic High Output Level | tPLH | 52 | 100 | ns | 3.3V table (3.0V≤VDD≤3.6V), IF=8.0 mA: RL=350Ω, CL=15 pF | 11 | |
| Propagation Delay Time to Logic Low Output Level | tPHL | 44 | 100 | ns | 3.3V table (3.0V≤VDD≤3.6V), IF=8.0 mA: RL=350Ω, CL=15 pF | 11 | |
| Pulse Width Distortion | /PWD/ | 8 | 35 | ns | 3.3V table (3.0V≤VDD≤3.6V), IF=8.0 mA: RL=350Ω, CL=15 pF | 11 | |
| Propagation Delay Skew | tPSK | 40 | ns | 3.3V table (3.0V≤VDD≤3.6V), IF=8.0 mA: RL=350Ω, CL=15 pF | 11 | ||
| Input Threshold Current | ITH | 2.7 | 7 | mA | 5V table (4.5V≤VDD≤5.5V): IOL(Sinking)=13 mA, VO=0.6V | 12 | |
| High Level Output Current | IOH | 3.8 | 100 | µA | 5V table (4.5V≤VDD≤5.5V): IF=250 µA, VO=5.5V | 12 | |
| Low Level Output Voltage | VOL | 0.36 | 0.6 | V | 5V table (4.5V≤VDD≤5.5V): IOL(Sinking)=13 mA, IF=7 mA | 12 | |
| High Level Supply Current (per channel) | IDDH | 4.3 | 7.5 | mA | 5V table (4.5V≤VDD≤5.5V): IF=0 mA | 12 | |
| Low Level Supply Current (per channel) | IDDL | 5.8 | 10.5 | mA | 5V table (4.5V≤VDD≤5.5V): IF=10 mA | 12 | |
| Input Forward Voltage | VF | 1.25 | 1.52 | 1.8 | V | 5V table (4.5V≤VDD≤5.5V): IF=10 mA, TA=25°C | 12 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | 5V table (4.5V≤VDD≤5.5V): IR=10 µA | 12 | ||
| Logic High Common Mode Transient Immunity | /CMH/ | 10 | kV/µs | 5V table (4.5V≤VDD≤5.5V): Vcm=1000V, IF=0 mA, VO=2.0V, RL=350Ω, TA=25°C | 12 | ||
| Logic Low Common Mode Transient Immunity | /CML/ | 10 | kV/µs | 5V table (4.5V≤VDD≤5.5V): Vcm=1000V, IF=8 mA, VO=0.8V, RL=350Ω, TA=25°C | 12 | ||
| Maximum Data Rate | 10 | 15 | MBd | 5V table (4.5V≤VDD≤5.5V), IF=8.0 mA: RL=350Ω, CL=15 pF | 12 | ||
| Pulse Width | tPW | 100 | ns | 5V table (4.5V≤VDD≤5.5V), IF=8.0 mA: RL=350Ω, CL=15 pF | 12 | ||
| Propagation Delay Time to Logic High Output Level | tPLH | 46 | 100 | ns | 5V table (4.5V≤VDD≤5.5V), IF=8.0 mA: RL=350Ω, CL=15 pF | 12 | |
| Propagation Delay Time to Logic Low Output Level | tPHL | 43 | 100 | ns | 5V table (4.5V≤VDD≤5.5V), IF=8.0 mA: RL=350Ω, CL=15 pF | 12 | |
| Pulse Width Distortion | /PWD/ | 5 | 35 | ns | 5V table (4.5V≤VDD≤5.5V), IF=8.0 mA: RL=350Ω, CL=15 pF | 12 | |
| Propagation Delay Skew | tPSK | 40 | ns | 5V table (4.5V≤VDD≤5.5V), IF=8.0 mA: RL=350Ω, CL=15 pF | 12 | ||
| Input-Output Momentary Withstand Voltage (SO16) | VISO | 2500 | VRMS | RH 50%, t = 1 min. | 13 | ||
| Operating Temperature | TA | -40 | 100 | °C | 10 | ||
| Input Current, Low Level | IFL | 0 | 250 | µA | Off condition guaranteed when VFL ≤ 0.8 V (footnote a) | 10 | |
| Input Current, High Level | IFH | 7 | 15 | mA | Footnote b: initial switching threshold 7 mA or less; minimum 8 mA recommended for best performance | 10 | |
| Supply Voltage | VDD1, VDD2 | 3 | 5.5 | V | 10 | ||
| Fan Out | N | 5 | TTL Loads | RL = 1 kΩ | 10 | ||
| Storage Temperature | Ts | -55 | 125 | °C | 10 | ||
| Supply Voltage (1 Minute Maximum) | VDD1, VDD2 | 7 | V | 1 minute maximum | 10 | ||
| Reverse Input Voltage (Per Channel) | VR | 5 | V | 10 | |||
| Output Voltage (Per Channel) | VO | 7 | V | 10 | |||
| Average Forward Input Current (Per Channel) | IF | 15 | mA | Peaking transients up to 50 mA, 50 ns max pulse width, if average current does not exceed 15 mA (footnote a) | 10 | ||
| Output Current (Per Channel) | IO | 50 | mA | 10 | |||
| Input Power Dissipation (Per Channel) | PI | 27 | mW | 10 | |||
| Output Power Dissipation (Per Channel) | PO | 65 | mW | 10 |
CAD (KiCad official)
- Symbol:
ACSL-6400-00TE - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files:
acsl-6400-00te-etched.step/acsl-6400-00te-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acsl-6400-00te.step/acsl-6400-00te.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (20 pp, sha256
893adb307f5ec748, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).