main
Ray Publish 0.1.0 f9b4adf
{
  "slug": "acs733klatr-20ab-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Allegro MicroSystems, LLC Current Sensors, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "acs733klatr-20ab-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "acs733klatr-20ab-t.kicad_sym",
    "acs733klatr-20ab-t.kicad_mod",
    "acs733klatr-20ab-t.glb",
    "acs733klatr-20ab-t.step",
    "acs733klatr-20ab-t.lbr",
    "docs/hero.png",
    "docs/acs733klatr-20ab-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "acs733klatr-20ab-t-hero.glb",
    "acs733klatr-20ab-t-hero.overlay.json",
    "acs733klatr-20ab-t-etched.glb"
  ],
  "component": {
    "mpn": "ACS733KLATR-20AB-T",
    "manufacturer": "Allegro MicroSystems, LLC",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/587628bbf2c8dca14add18b23684c1dd.pdf",
    "parts": {
      "symbol": "acs733klatr-20ab-t.kicad_sym",
      "footprint": "acs733klatr-20ab-t.kicad_mod",
      "model_3d": "acs733klatr-20ab-t-hero.glb",
      "model_3d_plain": "acs733klatr-20ab-t-etched.glb",
      "model_3d_step": "acs733klatr-20ab-t-etched.step",
      "model_3d_step_plain": "acs733klatr-20ab-t.step",
      "lbr": "acs733klatr-20ab-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C22383843",
      "digikey": "620-ACS733KLATR-20AB-TTR-ND",
      "mouser": "250-ACS733KLATR20ABT"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T00:25:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "620-ACS733KLATR-20AB-TTR-ND",
        "status": "found",
        "lifecycle": "Discontinued at DigiKey"
      },
      "mouser": {
        "pn": "250-ACS733KLATR20ABT",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Positive terminal for the current being sensed; fused internally."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Positive terminal for the current being sensed; fused internally."
      },
      {
        "number": "3",
        "name": "IP+",
        "type": "passive",
        "description": "Positive terminal for the current being sensed; fused internally."
      },
      {
        "number": "4",
        "name": "IP+",
        "type": "passive",
        "description": "Positive terminal for the current being sensed; fused internally."
      },
      {
        "number": "5",
        "name": "IP–",
        "type": "passive",
        "description": "Negative terminal for the current being sensed; fused internally."
      },
      {
        "number": "6",
        "name": "IP–",
        "type": "passive",
        "description": "Negative terminal for the current being sensed; fused internally."
      },
      {
        "number": "7",
        "name": "IP–",
        "type": "passive",
        "description": "Negative terminal for the current being sensed; fused internally."
      },
      {
        "number": "8",
        "name": "IP–",
        "type": "passive",
        "description": "Negative terminal for the current being sensed; fused internally."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground terminal."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground terminal."
      },
      {
        "number": "11",
        "name": "PROGRAM",
        "type": "input",
        "description": "Programming input for factory calibration; connect to ground for best ESD performance."
      },
      {
        "number": "12",
        "name": "VIOUT",
        "type": "output",
        "description": "Analog output signal that changes proportionally with the bidirectional primary sensed current; maximum survivable sink or source current is 15 mA."
      },
      {
        "number": "13",
        "name": "FAULT",
        "type": "output",
        "description": "Overcurrent fault output, open drain; requires a pull-up of 10 kΩ to 500 kΩ and sees 0.4 V maximum low output in fault condition with 10 kΩ pull-up."
      },
      {
        "number": "14",
        "name": "VOC",
        "type": "input",
        "description": "Sets the overcurrent fault threshold through an external resistor divider on this pin; VOC input range is 0.1 × VCC to 0.4 × VCC."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply terminal; for the ACS733 (3.3 V) variant the supply is 3.14 V to 3.46 V."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply terminal; for the ACS733 (3.3 V) variant the supply is 3.14 V to 3.46 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint 'SOIC-16-300mil' matches the datasheet's 'Package LA, 16-Pin SOICW' (wide-body SOIC-16,; The MPN ACS733KLATR-20AB-T is the 3.3 V variant per the selection guide (page 2), so the VCC descrip; FAULT is described as open drain in the datasheet; the schema has no open-drain class, so it is mapp"
        ],
        "pages_sent": 28,
        "cost_usd": 0.1517,
        "at": "2026-11-11T00:24:48"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/587628bbf2c8dca14add18b23684c1dd.pdf",
        "pages": 28,
        "sha256": "70b2d3947af374f1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "acs733klatr-20ab-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "acs733klatr-20ab-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "69eb10f5c9b911ac3b039dc846d4efaeccdd10a620879b39bf5539f4e0be9802",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}