3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS724LMATR-50AU-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS724LMATR-50AU-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 2 | IP+ | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 3 | IP+ | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 4 | IP+ | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 5 | IP- | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 6 | IP- | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 7 | IP- | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 8 | IP- | passive | Terminal for the current being sensed; fused internally, and part of the primary conductor path (IP+ to IP-). |
| 9 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
| 10 | VCC | power_in | Device power supply terminal; the device operates from 4.5 to 5.5 V single supply, with an absolute maximum of 6 V. |
| 11 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 12 | VIOUT | output | Analog output signal, proportional to the bidirectional or unidirectional sensed primary current. |
| 13 | FILTER | passive | Terminal for an external capacitor that sets the output bandwidth (forms an RC circuit with the internal filter resistance RF(INT)). |
| 14 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 15 | GND | power_in | Signal ground terminal. |
| 16 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 5 | |
| Supply Current | ICC | 10 | 14 | mA | VCC within VCC(min) and VCC(max) | 5 | |
| Output Capacitance Load | CL | 10 | nF | VIOUT to GND | 5 | ||
| Output Resistive Load | RL | 4.7 | kΩ | VIOUT to GND | 5 | ||
| Nonlinearity | ELIN | -1 | 1 | % | Through full range of IP | 5 | |
| Saturation Voltage Low | VOL | 0.5 | V | RL = 4.7 kΩ, TA = 25°C | 5 | ||
| Current Sensing Range (50AU) | IPR | 0 | 50 | A | 10 | ||
| Total Output Error (25°C to 150°C) | ETOT | -2.5 | 1 | 2.5 | % | IP = IPR(max), TA = 25°C to 150°C | 10 |
| Total Output Error (-40°C to 25°C) | ETOT | -6 | 3 | 6 | % | IP = IPR(max), TA = -40°C to 25°C | 10 |
| Sensitivity Error (25°C to 150°C) | ESENS | -2 | 1 | 2 | % | TA = 25°C to 150°C, measured at IP = IPR(max) | 10 |
| Sensitivity Error (-40°C to 25°C) | ESENS | -5.5 | 2.8 | 5.5 | % | TA = -40°C to 25°C, measured at IP = IPR(max) | 10 |
| Offset Voltage (25°C to 150°C) | VOE | -15 | 5 | 15 | mV | IP = 0 A, TA = 25°C to 150°C | 10 |
| Offset Voltage (-40°C to 25°C) | VOE | -30 | 20 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 10 |
| Sensitivity Error Including Lifetime Drift (25°C to 150°C) | Esens_drift | -3 | 1 | 3 | % | TA = 25°C to 150°C | 10 |
| Sensitivity Error Including Lifetime Drift (-40°C to 25°C) | Esens_drift | -5.5 | 3 | 5.5 | % | TA = -40°C to 25°C | 10 |
| Total Output Error Including Lifetime Drift (25°C to 150°C) | Etot_drift | -3.5 | 1 | 3.5 | % | TA = 25°C to 150°C | 10 |
| Total Output Error Including Lifetime Drift (-40°C to 25°C) | Etot_drift | -6 | 3 | 6 | % | TA = -40°C to 25°C | 10 |
| Offset Error Including Lifetime Drift (25°C to 150°C) | EOff_Drift | -20 | 20 | mV | TA = 25°C to 150°C | 10 | |
| Offset Error Including Lifetime Drift (-40°C to 25°C) | EOff_Drift | -30 | 20 | 30 | mV | TA = -40°C to 25°C | 10 |
| Supply Voltage (absolute maximum) | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Operating Ambient Temperature (Range L) | TA | -40 | 150 | °C | Range L | 3 | |
| Junction Temperature (max) | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 3 | ||
| Package Thermal Resistance (Junction to Ambient) | RθJA | 23 | °C/W | Allegro 85-0738 evaluation board with 700 mm2 of 4 oz. copper on each side | 3 | ||
| Package Thermal Resistance (Junction to Lead) | RθJL | 5 | °C/W | Allegro ASEK724 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | flows through the primary copper conduction path (from pins | 1 |
CAD (KiCad official)
- Symbol:
ACS724LMATR-50AU-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs724lmatr-50au-t-etched.step/acs724lmatr-50au-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs724lmatr-50au-t.step/acs724lmatr-50au-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (23 pp, sha256
84a1c8a666a38891, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).