component
ACS724LLCTR-30AU-T
Public Made by Adomby adom
Allegro MicroSystems, LLC Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS724LLCTR-30AU-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-8
ACS724LLCTR-30AU-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for current being sensed, fused internally and connected in parallel with pin 2 (1.2 mΩ typical primary conductor resistance). |
| 2 | IP+ | passive | Terminal for current being sensed, fused internally and connected in parallel with pin 1 (1.2 mΩ typical primary conductor resistance). |
| 3 | IP- | passive | Terminal for current being sensed, fused internally and connected in parallel with pin 4 (1.2 mΩ typical primary conductor resistance). |
| 4 | IP- | passive | Terminal for current being sensed, fused internally and connected in parallel with pin 3 (1.2 mΩ typical primary conductor resistance). |
| 5 | GND | power_in | Signal ground terminal. |
| 6 | FILTER | passive | Terminal for external capacitor that sets bandwidth, forming an RC circuit with the 1.8 kΩ typical internal filter resistance. |
| 7 | VIOUT | output | Analog output signal proportional to the sensed current, with maximum 10 nF capacitive load and minimum 4.7 kΩ resistive load to GND. |
| 8 | VCC | power_in | Device power supply terminal, 4.5 to 5.5 V operating range with 6 V absolute maximum, bypassed with 0.1 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Output Error | ETOT | -2 | 0.7 | 2 | % | IP = IPR(max), TA = 25°C to 150°C | 12 |
| Total Output Error | ETOT | -6 | 4 | 6 | % | IP = IPR(max), TA = -40°C to 25°C | 12 |
| Sensitivity Error | Esens | -1.5 | 0.7 | 1.5 | % | IP = IPR(max), TA = 25°C to 150°C | 12 |
| Sensitivity Error | Esens | -5.5 | 4 | 5.5 | % | IP = IPR(max), TA = -40°C to 25°C | 12 |
| Voltage Offset Error | VOE | -10 | 6 | 10 | mV | IP = 0 A, TA = 25°C to 150°C | 12 |
| Voltage Offset Error | VOE | -30 | 7 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 12 |
| Sensitivity Error Lifetime Drift | Esens_drift | -3 | 1 | 3 | % | 12 | |
| Total Output Error Lifetime Drift | Etot_drift | -3 | 1 | 3 | % | 12 | |
| Current Sensing Range | IPR | 0 | 30 | A | 12 | ||
| Sensitivity | Sens | 133 | mV/A | IPR(min) < IP < IPR(max) | 12 | ||
| Zero-Current Output Voltage | VIOUT(Q) | 0.1 | V | Unidirectional, IP = 0 A; typ printed as VCC × 0.1 | 12 | ||
| Supply Voltage | VCC | 4.5 | 5.5 | V | 5 | ||
| Supply Current | ICC | 10 | 14 | mA | VCC = 5 V, output open | 5 | |
| Output Capacitance Load | CL | 10 | nF | VIOUT to GND | 5 | ||
| Output Resistive Load | RL | 4.7 | kΩ | VIOUT to GND | 5 | ||
| Nonlinearity | ELIN | -1.5 | 1.5 | % | Through full range of IP | 5 | |
| Primary Conductor Resistance | RIP | 1.2 | mΩ | TA = 25°C | 5 | ||
| Bandwidth | BW | 120 | kHz | Small signal -3 dB; CL = 1 nF | 5 | ||
| Supply Voltage | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Maximum Continuous Current | ICMAX | 55 | A | TA = 25°C | 3 | ||
| Operating Ambient Temperature | TA | -40 | 150 | °C | Range L | 3 | |
| Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 3 | ||
| Junction to Ambient Thermal Resistance | RθJA | 23 | °C/W | Mounted on Allegro 85-0740 evaluation board, 1500 mm2 of 4 oz. copper each side | 3 | ||
| Junction to Lead Thermal Resistance | RθJL | 5 | °C/W | Mounted on the Allegro ASEK724 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | through the primary copper conduction path (from pins 1 and | 1 |
CAD (KiCad official)
- Symbol:
ACS724LLCTR-30AU-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
acs724llctr-30au-t-etched.step/acs724llctr-30au-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs724llctr-30au-t.step/acs724llctr-30au-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (25 pp, sha256
1b172b64e8e1a4c5, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).