component
ACS724LLCTR-30AB-T
Public Made by Adomby adom
Allegro MicroSystems LLC Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 2h ago |
| viewers | 2h ago |
| acs724llctr-30ab-t-etched.glb | 2h ago |
| acs724llctr-30ab-t-etched.step | 2h ago |
| acs724llctr-30ab-t-hero.glb | 2h ago |
| acs724llctr-30ab-t-hero.overlay.json | 2h ago |
| acs724llctr-30ab-t.glb | 2h ago |
| acs724llctr-30ab-t.kicad_mod | 2h ago |
| acs724llctr-30ab-t.kicad_sym | 2h ago |
| acs724llctr-30ab-t.lbr | 2h ago |
| acs724llctr-30ab-t.step | 2h ago |
| package.json | 2h ago |
| page.json | 2h ago |
| README.md | 2h ago |
ACS724LLCTR-30AB-T
Allegro MicroSystems LLC · Current Sensors · SOIC-8
ACS724LLCTR-30AB-T from Allegro MicroSystems LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the current being sensed, fused internally and forming part of the primary conductor path that runs from pins 1 and 2 to pins 3 and 4. |
| 2 | IP+ | passive | Terminal for the current being sensed, fused internally and forming part of the primary conductor path that runs from pins 1 and 2 to pins 3 and 4. |
| 3 | IP- | passive | Terminal for the current being sensed, fused internally and forming part of the primary conductor path that runs from pins 1 and 2 to pins 3 and 4. |
| 4 | IP- | passive | Terminal for the current being sensed, fused internally and forming part of the primary conductor path that runs from pins 1 and 2 to pins 3 and 4. |
| 5 | GND | power_in | Signal ground terminal for the sensor leads. |
| 6 | FILTER | passive | Terminal for an external capacitor that sets the output bandwidth together with the internal filter resistance RF(int) of 1.8 kΩ typical. |
| 7 | VIOUT | output | Analog output signal that changes proportionally with the bidirectional primary sensed current, with a maximum output capacitance load of 10 nF and minimum resistive load of 4.7 kΩ to GND. |
| 8 | VCC | power_in | Device power supply terminal, specified at 4.5 to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems LLC |
| Package | SOIC-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5.5 | V | 5 | ||
| Supply Current | ICC | 10 | 14 | mA | VCC = 5 V, output open | 5 | |
| Output Capacitance Load | CL | 10 | nF | VIOUT to GND | 5 | ||
| Output Resistive Load | RL | 4.7 | kΩ | VIOUT to GND | 5 | ||
| Nonlinearity | ELIN | -1.5 | 1.5 | % | Through full range of IP | 5 | |
| Hall Plate Sensitivity Matching | Sensmatch | -1 | 1 | % | TA = 25°C | 5 | |
| Current Sensing Range | IPR | -30 | 30 | A | 13 | ||
| Total Output Error (25°C to 150°C) | ETOT | -2 | 0.8 | 2 | % | IP = IPR(max), TA = 25°C to 150°C | 13 |
| Total Output Error (-40°C to 25°C) | ETOT | -6 | 4 | 6 | % | IP = IPR(max), TA = -40°C to 25°C | 13 |
| Sensitivity Error (25°C to 150°C) | Esens | -1.5 | 0.8 | 1.5 | % | IP = IPR(max), TA = 25°C to 150°C | 13 |
| Sensitivity Error (-40°C to 25°C) | Esens | -5.5 | 4 | 5.5 | % | IP = IPR(max), TA = -40°C to 25°C | 13 |
| Voltage Offset Error (25°C to 150°C) | VOE | -10 | 6 | 10 | mV | IP = 0 A, TA = 25°C to 150°C | 13 |
| Voltage Offset Error (-40°C to 25°C) | VOE | -30 | 6 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 13 |
| Sensitivity Error Lifetime Drift | Esens_drift | -3 | 1 | 3 | % | 13 | |
| Total Output Error Lifetime Drift | Etot_drift | -3 | 1 | 3 | % | 13 | |
| Supply Voltage (absolute maximum) | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Maximum Continuous Current | ICMAX | 55 | A | TA = 25°C | 3 | ||
| Operating Ambient Temperature (Range L) | TA | -40 | 150 | °C | 3 | ||
| Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 3 | ||
| Sensitivity | Sens | 66 | mV/A | IPR(min) < IP < IPR(max) | 13 | ||
| Primary Conductor Resistance | RIP | 1.2 | mΩ | TA = 25°C | 5 | ||
| Primary Conductor Inductance | LIP | 2 | nH | TA = 25°C | 5 | ||
| Internal Filter Resistance | RF(int) | 1.8 | kΩ | 5 | |||
| Common Mode Field Rejection Ratio | CMFRR | 40 | dB | Uniform external magnetic field | 5 | ||
| Primary Hall Coupling Factor | G1 | 11 | G/A | TA = 25°C | 5 | ||
| Secondary Hall Coupling Factor | G2 | 2.8 | G/A | TA = 25°C | 5 | ||
| Rise Time | tr | 3 | μs | TA = 25°C, CL = 1 nF | 5 | ||
| Propagation Delay | tpd | 2 | μs | TA = 25°C, CL = 1 nF | 5 | ||
| Response Time | tRESPONSE | 4 | μs | TA = 25°C, CL = 1 nF | 5 | ||
| Output Slew Rate | SR | 0.53 | V/μs | TA = 25°C, CL = 1 nF | 5 | ||
| Bandwidth | BW | 120 | kHz | Small signal -3 dB; CL = 1 nF | 5 | ||
| Noise Density | IND | 150 | µA(rms)/√Hz | Input-referenced; TA = 25°C, CL = 1 nF | 5 | ||
| Noise | IN | 20 | mA(rms) | CF = 4.7 nF, CL = 1 nF, BW = 18 kHz, TA = 25°C | 5 | ||
| Sensitivity Ratiometry Coefficient | SENS_RAT_COEF | 1.3 | VCC = 4.5 to 5.5 V, TA = 25°C | 5 | |||
| Zero-Current Output Ratiometry Coefficient | QVO_RAT_COEF | 1 | VCC = 4.5 to 5.5 V, TA = 25°C | 5 | |||
| Saturation Voltage (low) | VOL | 0.3 | V | RL = 4.7 kΩ | 5 | ||
| Power-On Time | tPO | 80 | μs | TA = 25°C | 5 | ||
| Shorted Output-to-Ground Current | ISC(GND) | 3.3 | mA | TA = 25°C | 5 | ||
| Shorted Output-to-VCC Current | ISC(VCC) | 45 | mA | TA = 25°C | 5 | ||
| Package Thermal Resistance (Junction to Ambient) | RθJA | 23 | °C/W | Allegro 85-0740 evaluation board, 1500 mm² 4 oz copper | 3 | ||
| Package Thermal Resistance (Junction to Lead) | RθJL | 5 | °C/W | Allegro ASEK724 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | through the primary copper conduction path (from pins 1 and | 1 |
CAD (KiCad official)
- Symbol:
ACS724LLCTR-30AB-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
acs724llctr-30ab-t-etched.step/acs724llctr-30ab-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs724llctr-30ab-t.step/acs724llctr-30ab-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems LLC datasheet (24 pp, sha256
b9bcdc03fa944d78, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).