component
ACS723LLCTR-10AB-T
Public Made by Adomby adom
Allegro MicroSystems, LLC Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 5d ago |
| viewers | 5d ago |
| acs723llctr-10ab-t-etched.glb | 5d ago |
| acs723llctr-10ab-t-etched.step | 5d ago |
| acs723llctr-10ab-t-hero.glb | 5d ago |
| acs723llctr-10ab-t-hero.overlay.json | 5d ago |
| acs723llctr-10ab-t.glb | 5d ago |
| acs723llctr-10ab-t.kicad_mod | 5d ago |
| acs723llctr-10ab-t.kicad_sym | 5d ago |
| acs723llctr-10ab-t.lbr | 5d ago |
| acs723llctr-10ab-t.step | 5d ago |
| package.json | 5d ago |
| page.json | 5d ago |
| README.md | 5d ago |
ACS723LLCTR-10AB-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-8
ACS723LLCTR-10AB-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the primary current being sensed, fused internally, with the current flowing from pins 1 and 2 to pins 3 and 4 giving a positive output slope. |
| 2 | IP+ | passive | Terminal for the primary current being sensed, fused internally, with the current flowing from pins 1 and 2 to pins 3 and 4 giving a positive output slope. |
| 3 | IP- | passive | Terminal for the primary current being sensed, fused internally, forming the return end of the primary conductor path with 0.65 mΩ typical resistance. |
| 4 | IP- | passive | Terminal for the primary current being sensed, fused internally, forming the return end of the primary conductor path with 0.65 mΩ typical resistance. |
| 5 | GND | power_in | Signal ground terminal, electrically isolated from the primary conductor pins 1 through 4. |
| 6 | BW_SEL | input | Terminal for selecting the 20 kHz or 80 kHz bandwidth, with the 80 kHz high-bandwidth mode selected when it is grounded. |
| 7 | VIOUT | output | Analog output signal proportional to the bidirectional primary current, with a zero-current level of 0.5 × VCC. |
| 8 | VCC | power_in | Device power supply terminal, operating from 4.5 to 5.5 V with 6 V as the absolute maximum supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 6 | |
| Supply Current | ICC | 9 | 14 | mA | VCC within VCC(min) and VCC(max) | 6 | |
| Output Capacitance Load | CL | 10 | nF | VIOUT to GND | 6 | ||
| Output Resistive Load | RL | 4.7 | kΩ | VIOUT to GND | 6 | ||
| Current Sensing Range | IPR | -10 | 10 | A | 8 | ||
| Sensitivity Error | Esens | -1.5 | 1.5 | % | TA = 25°C to 150°C; measured at IP = IPR(max) | 8 | |
| Sensitivity Error | Esens | -2 | 2 | % | TA = -40°C to 25°C; measured at IP = IPR(max) | 8 | |
| Offset Voltage | VOE | -10 | 10 | mV | IP = 0 A; TA = 25°C to 150°C | 8 | |
| Offset Voltage | VOE | -15 | 15 | mV | IP = 0 A; TA = -40°C to 25°C | 8 | |
| Total Output Error | ETOT | -2 | 2 | % | IP = IPR(max), TA = 25°C to 150°C | 8 | |
| Total Output Error | ETOT | -3 | 3 | % | IP = IPR(max), TA = -40°C to 25°C | 8 | |
| Sensitivity Error Lifetime Drift | Esens_drift | -2 | 2 | % | 8 | ||
| Total Output Error Lifetime Drift | Etot_drift | -2 | 2 | % | 8 | ||
| Saturation Voltage (low) | VOL | 0.5 | V | RL = 4.7 kΩ, TA = 25°C | 6 | ||
| Supply Voltage | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Output Voltage | VIOUT | 25 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Operating Ambient Temperature Range L | TA | -40 | 150 | °C | Range L | 3 | |
| Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 3 | ||
| Sensitivity | Sens | 200 | mV/A | IPR(min) < IP < IPR(max) | 8 | ||
| Primary Conductor Resistance | RIP | 0.65 | mΩ | TA = 25°C | 6 | ||
| Magnetic Coupling Factor | CF | 10 | G/A | 6 | |||
| Package Thermal Resistance (Junction to Ambient) | RθJA | 23 | ºC/W | Mounted on Allegro 85-0593 evaluation board, 400 mm2 of 4 oz copper on each side | 3 | ||
| Package Thermal Resistance (Junction to Lead) | RθJL | 5 | ºC/W | Mounted on Allegro ASEK 723 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | primary copper conduction path (from pins 1 and 2, to pins 3 | 1 |
CAD (KiCad official)
- Symbol:
ACS723LLCTR-10AB-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
acs723llctr-10ab-t-etched.step/acs723llctr-10ab-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs723llctr-10ab-t.step/acs723llctr-10ab-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (22 pp, sha256
0c250cc20ef8e9ba, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).