ACS722LLCTR-10AB-T

{
  "slug": "acs722llctr-10ab-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Allegro MicroSystems LLC Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "magnetic sensors",
    "acs722llctr-10ab-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "acs722llctr-10ab-t.kicad_sym",
    "acs722llctr-10ab-t.kicad_mod",
    "acs722llctr-10ab-t.glb",
    "acs722llctr-10ab-t.step",
    "acs722llctr-10ab-t.lbr",
    "docs/hero.png",
    "docs/acs722llctr-10ab-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "acs722llctr-10ab-t-hero.glb",
    "acs722llctr-10ab-t-hero.overlay.json",
    "acs722llctr-10ab-t-etched.glb"
  ],
  "component": {
    "mpn": "ACS722LLCTR-10AB-T",
    "manufacturer": "Allegro MicroSystems LLC",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Magnetic Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912516517285889",
    "parts": {
      "symbol": "acs722llctr-10ab-t.kicad_sym",
      "footprint": "acs722llctr-10ab-t.kicad_mod",
      "model_3d": "acs722llctr-10ab-t-hero.glb",
      "model_3d_plain": "acs722llctr-10ab-t-etched.glb",
      "model_3d_step": "acs722llctr-10ab-t-etched.step",
      "model_3d_step_plain": "acs722llctr-10ab-t.step",
      "lbr": "acs722llctr-10ab-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C459316",
      "digikey": "620-1635-2-ND",
      "mouser": "250-722LLCTR10ABT"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:56:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "620-1635-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "250-722LLCTR10ABT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sensed, fused internally; primary current flows from pins 1 and 2 to pins 3 and 4 to produce a positive output slope."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sensed, fused internally; primary current flows from pins 1 and 2 to pins 3 and 4 to produce a positive output slope."
      },
      {
        "number": "3",
        "name": "IP–",
        "type": "passive",
        "description": "Terminal for the current being sensed, fused internally; primary current exits through pins 3 and 4 when current flows from pins 1 and 2."
      },
      {
        "number": "4",
        "name": "IP–",
        "type": "passive",
        "description": "Terminal for the current being sensed, fused internally; primary current exits through pins 3 and 4 when current flows from pins 1 and 2."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground terminal for the sensor IC."
      },
      {
        "number": "6",
        "name": "BW_SEL",
        "type": "input",
        "description": "Terminal for selecting the 20 kHz or 80 kHz bandwidth; grounding it selects the 80 kHz high-bandwidth mode and tying it to VCC selects 20 kHz low-noise mode."
      },
      {
        "number": "7",
        "name": "VIOUT",
        "type": "output",
        "description": "Analog output signal, proportional to the bidirectional or unidirectional primary sensed current."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply terminal; the datasheet specifies a 3 V minimum, 3.3 V typical and 3.6 V maximum supply."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN ACS722LLCTR-10AB-T is in the LC (SOIC8) package, and the pinout on page 5 is the terminal li"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0917,
        "at": "2026-10-18T02:55:03"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912516517285889",
        "pages": 23,
        "sha256": "a3574a09b92a080b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "acs722llctr-10ab-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "acs722llctr-10ab-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c735edc033baa18c0673f11d74e3a40c7215b665f8e7a579a324e668fdd4f1d7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}