← Commit history

Publish 0.1.3

Ray ·80c7fb04ae · ·parent 3f2341c
3 files changed +84−78
README.md+33−27
@@ -8,22 +8,22 @@ ACS720KLATR-35AB-T-4 from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pi  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | IP+ | passive | Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side. |-| 2 | IP+ | passive | Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side. |-| 3 | IP+ | passive | Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side. |-| 4 | IP+ | passive | Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side. |-| 5 | IP- | passive | Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side. |-| 6 | IP- | passive | Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side. |-| 7 | IP- | passive | Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side. |-| 8 | IP- | passive | Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side. |-| 9 | GND | power_in | Signal ground terminal. |-| 10 | FAULT_S | output | Open drain slow fault output, low true; it is pulled up externally, with fault pull-up resistance RPU of 4.7 kΩ to 500 kΩ. |-| 11 | FILTER | passive | Add a capacitor to set the output filter pole location. |-| 12 | VIOUT | output | Analog output signal; the output swings from 0 to 3 V with a 1.5 V zero-current output. |-| 13 | FAULT_F | output | Open drain fast fault output, low true; it is pulled up externally, with fault pull-up resistance RPU of 4.7 kΩ to 500 kΩ. |-| 14 | VCC | power_in | Device power supply terminal; supply voltage is 4.5 V minimum, 5.0 V typical and 5.5 V maximum. |-| 15 | VOC_F | input | Sets the trip current level for the fast fault; the acceptable input range is 0.3 × VCC to 0.7 × VCC. |-| 16 | VOC_S | input | Sets the trip current level for the slow fault; the acceptable input range is 0.3 × VCC to 0.7 × VCC. |+| 1 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive side), fused internally. |+| 2 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive side), fused internally. |+| 3 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive side), fused internally. |+| 4 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive side), fused internally. |+| 5 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side), fused internally. |+| 6 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side), fused internally. |+| 7 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side), fused internally. |+| 8 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side), fused internally. |+| 9 | GND | power_in | Signal ground terminal for the device. |+| 10 | FAULT_S | output | Open-drain slow fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage. |+| 11 | FILTER | passive | Add a capacitor here to set the output filter pole location (internal filter resistance RF(INT) typ. 1.7 kΩ). |+| 12 | VIOUT | output | Analog output signal, 0 to 3 V swing with 1.5 V zero-current output; output source current typ. 3 mA and sink current typ. 30 mA. |+| 13 | FAULT_F | output | Open-drain fast fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage. |+| 14 | VCC | power_in | Device power supply terminal, 4.5 V to 5.5 V (5.0 V typical). |+| 15 | VOC_F | input | Sets the trip current level for the fast fault; acceptable input range is 0.3 × VCC to 0.7 × VCC. |+| 16 | VOC_S | input | Sets the trip current level for the slow fault; acceptable input range is 0.3 × VCC to 0.7 × VCC. |  ## Key specifications @@ -40,7 +40,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V |  | 5 |+| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | Over full range of TA | 5 | | Supply Current | ICC |  | 13 | 16 | mA | VCC = 5.0 V, output open | 5 | | Output Capacitance Load | CL |  |  | 10 | nF | VIOUT to GND | 5 | | Output Resistive Load | RL | 10 |  |  | kΩ | VIOUT to GND, VIOUT to VCC | 5 |@@ -55,14 +55,14 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Sensitivity Error | ESENS | -4 | 1.5 | 4 | % | IP = IPR(max), TA = -40°C to 25°C | 10 | | Offset Voltage | VOE | -10 | 3.5 | 10 | mV | IP = 0 A, TA = 25°C to 125°C | 10 | | Offset Voltage | VOE | -30 | 9 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 10 |-| Fast Fault Error (positive IP) | EFF(HIGH)+ | -10 | 5 | 10 | % | VOC_F = 0.7 × VCC, Positive IP, TA = 25°C | 10 |-| Fast Fault Error (negative IP) | EFF(HIGH)- | -10 | 5 | 10 | % | VOC_F = 0.7 × VCC, Negative IP, TA = 25°C | 10 |-| Fast Fault Error (negative IP) | EFF(HIGH)- | -15 | 10 | 15 | % | VOC_F = 0.7 × VCC, Negative IP, TA = 25°C to 125°C | 10 |-| Fast Fault Error (positive IP, low trip) | EFF(LOW)+ | -20 | 12 | 20 | % | VOC_F = 0.38 × VCC, Positive IP, TA = 25°C | 10 |-| Fast Fault Error (negative IP, low trip) | EFF(LOW)- | -20 | 12 | 20 | % | VOC_F = 0.38 × VCC, Negative IP, TA = 25°C | 10 |-| Fast Fault Error (negative IP, low trip) | EFF(LOW)- | -30 | 18 | 30 | % | VOC_F = 0.38 × VCC, Negative IP, TA = 25°C to 125°C | 10 |-| Slow Fault Error (high trip) | ESF(HIGH) | -6 | 3 | 6 | % | VOC_S = 0.7 × VCC, IP rising | 10 |-| Slow Fault Error (low trip) | ESF(LOW) | -10 | 5 | 10 | % | VOC_S = 0.3 × VCC, IP rising | 10 |+| Fast Fault Error (high, positive IP) | EFF(HIGH)+ | -10 | 5 | 10 | % | VOC_F = 0.7 × VCC, Positive IP, TA = 25°C | 10 |+| Fast Fault Error (high, negative IP) | EFF(HIGH)- | -10 | 5 | 10 | % | VOC_F = 0.7 × VCC, Negative IP, TA = 25°C | 10 |+| Fast Fault Error (high, negative IP) | EFF(HIGH)- | -15 | 10 | 15 | % | VOC_F = 0.7 × VCC, Negative IP, TA = 25°C to 125°C | 10 |+| Fast Fault Error (low, positive IP) | EFF(LOW)+ | -20 | 12 | 20 | % | VOC_F = 0.38 × VCC, Positive IP, TA = 25°C | 10 |+| Fast Fault Error (low, negative IP) | EFF(LOW)- | -20 | 12 | 20 | % | VOC_F = 0.38 × VCC, Negative IP, TA = 25°C | 10 |+| Fast Fault Error (low, negative IP) | EFF(LOW)- | -30 | 18 | 30 | % | VOC_F = 0.38 × VCC, Negative IP, TA = 25°C to 125°C | 10 |+| Slow Fault Error (high) | ESF(HIGH) | -6 | 3 | 6 | % | VOC_S = 0.7 × VCC, IP rising | 10 |+| Slow Fault Error (low) | ESF(LOW) | -10 | 5 | 10 | % | VOC_S = 0.3 × VCC, IP rising | 10 | | Supply Voltage | VCC |  |  | 6 | V |  | 3 | | Reverse Supply Voltage | VRCC | -0.5 |  |  | V |  | 3 | | Filter Voltage | VFILTER |  |  | 25 | V |  | 3 |@@ -70,9 +70,15 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Reverse Output Voltage | VRIOUT, VRFAULT_S, VRFAULT_F | -0.5 |  |  | V |  | 3 | | Reverse Input Pin Voltages | VROC_S, VROC_F | -0.5 |  |  | V |  | 3 | | Maximum Continuous Current | ICMAX |  |  | 55 | A | TA = 25°C | 3 |-| Operating Ambient Temperature | TA | -40 |  | 125 | °C | Range K | 3 |+| Operating Ambient Temperature Range K | TA | -40 |  | 125 | °C | Range K | 3 | | Junction Temperature | TJ(max) |  |  | 165 | °C |  | 3 | | Storage Temperature | Tstg | -65 |  | 170 | °C |  | 3 |+| Clearance | Dcl | 7.5 |  |  | mm | Minimum distance through air from IP leads to signal leads | 3 |+| Creepage | Dcr | 7.5 |  |  | mm | Minimum distance along package body from IP leads to signal leads | 3 |+| Working Voltage for Basic Isolation | VWVBI |  |  | 870 | VPK or VDC | Basic (single) isolation according to UL 60950-1 (edition 2) | 3 |+| Working Voltage for Basic Isolation | VWVBI |  |  | 616 | VRMS | Basic (single) isolation according to UL 60950-1 (edition 2) | 3 |+| Human Body Model ESD | VHBM | -7 |  | 7 | kV | Per AEC-Q100 | 3 |+| Charged Device Model ESD | VCDM | -1 |  | 1 | kV | Per AEC-Q100 | 3 | | Junction-to-Ambient Thermal Resistance | RθJA |  | 17 |  | °C/W | Mounted on the Allegro ASEK732/3 evaluation board | 4 | | Junction-to-Lead Thermal Resistance | RθJL |  | 5 |  | °C/W | Mounted on the Allegro ASEK732/3 evaluation board | 4 | @@ -95,7 +101,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/acs720klatr-35ab-t-4-datasheet.pdf) (35 pp, sha256 `c9ef0edb0725da48`, retrieved 2026-11-13, tier: lcsc)+- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/acs720klatr-35ab-t-4-datasheet.pdf) (35 pp, sha256 `c9ef0edb0725da48`, retrieved 2026-11-17, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+24−25
@@ -1,6 +1,6 @@ {   "slug": "acs720klatr-35ab-t-4",-  "version": "0.1.2",+  "version": "0.1.3",   "type": "component",   "description": "Allegro MicroSystems, LLC Current Sensors, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "250-720KLATR35ABT4"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:18:01Z",+      "checked_at": "2026-11-17T21:55:58Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "620-ACS720KLATR-35AB-T-4-ND",@@ -69,97 +69,97 @@         "number": "1",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "2",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "3",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "4",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "5",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "6",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "7",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "8",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Signal ground terminal."+        "description": "Signal ground terminal for the device."       },       {         "number": "10",         "name": "FAULT_S",         "type": "output",-        "description": "Open drain slow fault output, low true; it is pulled up externally, with fault pull-up resistance RPU of 4.7 kΩ to 500 kΩ."+        "description": "Open-drain slow fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage."       },       {         "number": "11",         "name": "FILTER",         "type": "passive",-        "description": "Add a capacitor to set the output filter pole location."+        "description": "Add a capacitor here to set the output filter pole location (internal filter resistance RF(INT) typ. 1.7 kΩ)."       },       {         "number": "12",         "name": "VIOUT",         "type": "output",-        "description": "Analog output signal; the output swings from 0 to 3 V with a 1.5 V zero-current output."+        "description": "Analog output signal, 0 to 3 V swing with 1.5 V zero-current output; output source current typ. 3 mA and sink current typ. 30 mA."       },       {         "number": "13",         "name": "FAULT_F",         "type": "output",-        "description": "Open drain fast fault output, low true; it is pulled up externally, with fault pull-up resistance RPU of 4.7 kΩ to 500 kΩ."+        "description": "Open-drain fast fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage."       },       {         "number": "14",         "name": "VCC",         "type": "power_in",-        "description": "Device power supply terminal; supply voltage is 4.5 V minimum, 5.0 V typical and 5.5 V maximum."+        "description": "Device power supply terminal, 4.5 V to 5.5 V (5.0 V typical)."       },       {         "number": "15",         "name": "VOC_F",         "type": "input",-        "description": "Sets the trip current level for the fast fault; the acceptable input range is 0.3 × VCC to 0.7 × VCC."+        "description": "Sets the trip current level for the fast fault; acceptable input range is 0.3 × VCC to 0.7 × VCC."       },       {         "number": "16",         "name": "VOC_S",         "type": "input",-        "description": "Sets the trip current level for the slow fault; the acceptable input range is 0.3 × VCC to 0.7 × VCC."+        "description": "Sets the trip current level for the slow fault; acceptable input range is 0.3 × VCC to 0.7 × VCC."       }     ],     "provenance": {@@ -173,12 +173,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pinout is taken from the single LA (SOICW-16) pinout diagram and terminal table, which apply to all ; Pin types are inferred, since the datasheet gives no ERC classes: IP+/IP- and FILTER are typed passi; The FAULT_S and FAULT_F pull-up resistance range (4.7 kΩ to 500 kΩ) is quoted from the Common Operat",-          "2/16 pins cited to the wrong page (name found elsewhere): ['15:VOC_F@p27', '16:VOC_S@p27']"+          "extractor flagged: The datasheet covers the ACS720KLATR-35AB-T-4 variant (the -4 suffix only changes the fast fault mas"         ],         "pages_sent": 35,-        "cost_usd": 0.1736,-        "at": "2026-11-13T01:17:49"+        "cost_usd": 0.1723,+        "at": "2026-11-17T21:55:32"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/03cb04351fb680f38635607915ad0902.pdf",@@ -215,7 +214,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -233,8 +232,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "94a312c9447de2c805f2f209d76244ab798394a6350e3a464a75681a66adc682",-        "checked": "2026-11-13",+        "sha256": "b844fd5793628d3e19098809bc3a5b2f12d2f0c2b1492df361c212347f89e31a",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+27−26
@@ -4,7 +4,7 @@   "slug": "acs720klatr-35ab-t-4",   "title": "ACS720KLATR-35AB-T-4",   "brief": "Allegro MicroSystems, LLC Current Sensors, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.2",+  "version": "0.1.3",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "250-720KLATR35ABT4"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:18:01Z",+      "checked_at": "2026-11-17T21:55:58Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "620-ACS720KLATR-35AB-T-4-ND",@@ -52,97 +52,97 @@         "number": "1",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "2",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "3",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "4",         "name": "IP+",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 1 through 4 are the primary conductor terminals on the IP+ side."+        "description": "Terminal for the current being sensed (primary conductor, positive side), fused internally."       },       {         "number": "5",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "6",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "7",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "8",         "name": "IP–",         "type": "passive",-        "description": "Terminal for the current being sensed; fused internally. Pins 5 through 8 are the primary conductor terminals on the IP- side."+        "description": "Terminal for the current being sensed (primary conductor, negative side), fused internally."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Signal ground terminal."+        "description": "Signal ground terminal for the device."       },       {         "number": "10",         "name": "FAULT_S",         "type": "output",-        "description": "Open drain slow fault output, low true; it is pulled up externally, with fault pull-up resistance RPU of 4.7 kΩ to 500 kΩ."+        "description": "Open-drain slow fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage."       },       {         "number": "11",         "name": "FILTER",         "type": "passive",-        "description": "Add a capacitor to set the output filter pole location."+        "description": "Add a capacitor here to set the output filter pole location (internal filter resistance RF(INT) typ. 1.7 kΩ)."       },       {         "number": "12",         "name": "VIOUT",         "type": "output",-        "description": "Analog output signal; the output swings from 0 to 3 V with a 1.5 V zero-current output."+        "description": "Analog output signal, 0 to 3 V swing with 1.5 V zero-current output; output source current typ. 3 mA and sink current typ. 30 mA."       },       {         "number": "13",         "name": "FAULT_F",         "type": "output",-        "description": "Open drain fast fault output, low true; it is pulled up externally, with fault pull-up resistance RPU of 4.7 kΩ to 500 kΩ."+        "description": "Open-drain fast fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage."       },       {         "number": "14",         "name": "VCC",         "type": "power_in",-        "description": "Device power supply terminal; supply voltage is 4.5 V minimum, 5.0 V typical and 5.5 V maximum."+        "description": "Device power supply terminal, 4.5 V to 5.5 V (5.0 V typical)."       },       {         "number": "15",         "name": "VOC_F",         "type": "input",-        "description": "Sets the trip current level for the fast fault; the acceptable input range is 0.3 × VCC to 0.7 × VCC."+        "description": "Sets the trip current level for the fast fault; acceptable input range is 0.3 × VCC to 0.7 × VCC."       },       {         "number": "16",         "name": "VOC_S",         "type": "input",-        "description": "Sets the trip current level for the slow fault; the acceptable input range is 0.3 × VCC to 0.7 × VCC."+        "description": "Sets the trip current level for the slow fault; acceptable input range is 0.3 × VCC to 0.7 × VCC."       }     ],     "provenance": {@@ -156,12 +156,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pinout is taken from the single LA (SOICW-16) pinout diagram and terminal table, which apply to all ; Pin types are inferred, since the datasheet gives no ERC classes: IP+/IP- and FILTER are typed passi; The FAULT_S and FAULT_F pull-up resistance range (4.7 kΩ to 500 kΩ) is quoted from the Common Operat",-          "2/16 pins cited to the wrong page (name found elsewhere): ['15:VOC_F@p27', '16:VOC_S@p27']"+          "extractor flagged: The datasheet covers the ACS720KLATR-35AB-T-4 variant (the -4 suffix only changes the fast fault mas"         ],         "pages_sent": 35,-        "cost_usd": 0.1736,-        "at": "2026-11-13T01:17:49"+        "cost_usd": 0.1723,+        "at": "2026-11-17T21:55:32"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/03cb04351fb680f38635607915ad0902.pdf",@@ -198,7 +197,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -216,8 +215,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "94a312c9447de2c805f2f209d76244ab798394a6350e3a464a75681a66adc682",-        "checked": "2026-11-13",+        "sha256": "b844fd5793628d3e19098809bc3a5b2f12d2f0c2b1492df361c212347f89e31a",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -705,5 +704,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Allegro MicroSystems, LLC Current Sensors, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file