Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ACS720KLATR-35AB-T-4

Allegro MicroSystems, LLC · Current Sensors · SOIC-16

ACS720KLATR-35AB-T-4 from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Terminal for the current being sensed (primary conductor, positive side), fused internally.
2 IP+ passive Terminal for the current being sensed (primary conductor, positive side), fused internally.
3 IP+ passive Terminal for the current being sensed (primary conductor, positive side), fused internally.
4 IP+ passive Terminal for the current being sensed (primary conductor, positive side), fused internally.
5 IP- passive Terminal for the current being sensed (primary conductor, negative side), fused internally.
6 IP- passive Terminal for the current being sensed (primary conductor, negative side), fused internally.
7 IP- passive Terminal for the current being sensed (primary conductor, negative side), fused internally.
8 IP- passive Terminal for the current being sensed (primary conductor, negative side), fused internally.
9 GND power_in Signal ground terminal for the device.
10 FAULT_S output Open-drain slow fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage.
11 FILTER passive Add a capacitor here to set the output filter pole location (internal filter resistance RF(INT) typ. 1.7 kΩ).
12 VIOUT output Analog output signal, 0 to 3 V swing with 1.5 V zero-current output; output source current typ. 3 mA and sink current typ. 30 mA.
13 FAULT_F output Open-drain fast fault output, low true; pull up externally (RPU 4.7 kΩ to 500 kΩ) to a compatible logic voltage.
14 VCC power_in Device power supply terminal, 4.5 V to 5.5 V (5.0 V typical).
15 VOC_F input Sets the trip current level for the fast fault; acceptable input range is 0.3 × VCC to 0.7 × VCC.
16 VOC_S input Sets the trip current level for the slow fault; acceptable input range is 0.3 × VCC to 0.7 × VCC.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16
Category Magnetic Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 4.5 5 5.5 V Over full range of TA 5
Supply Current ICC 13 16 mA VCC = 5.0 V, output open 5
Output Capacitance Load CL 10 nF VIOUT to GND 5
Output Resistive Load RL 10 kΩ VIOUT to GND, VIOUT to VCC 5
Saturation Voltage VOL 150 mV RL = 10 kΩ (VIOUT to VCC) 5
Clamp Voltage VCLAMP 3 3.25 3.5 V 5
Fault Output Low Voltage VFAULTL 0.4 V RPU = 10 kΩ, under fault condition, FAULT_S and FAULT_F pins 6
Fault Pull-Up Resistance RPU 4.7 500 kΩ 6
Optimized Accuracy Range IPR -35 35 A 10
Total Output Error ETOT -1.5 0.6 1.5 % IP = IPR(max), TA = 25°C to 125°C 10
Total Output Error ETOT -4 1.5 4 % IP = IPR(max), TA = -40°C to 25°C 10
Sensitivity Error ESENS -1.5 0.6 1.5 % IP = IPR(max), TA = 25°C to 125°C 10
Sensitivity Error ESENS -4 1.5 4 % IP = IPR(max), TA = -40°C to 25°C 10
Offset Voltage VOE -10 3.5 10 mV IP = 0 A, TA = 25°C to 125°C 10
Offset Voltage VOE -30 9 30 mV IP = 0 A, TA = -40°C to 25°C 10
Fast Fault Error (high, positive IP) EFF(HIGH)+ -10 5 10 % VOC_F = 0.7 × VCC, Positive IP, TA = 25°C 10
Fast Fault Error (high, negative IP) EFF(HIGH)- -10 5 10 % VOC_F = 0.7 × VCC, Negative IP, TA = 25°C 10
Fast Fault Error (high, negative IP) EFF(HIGH)- -15 10 15 % VOC_F = 0.7 × VCC, Negative IP, TA = 25°C to 125°C 10
Fast Fault Error (low, positive IP) EFF(LOW)+ -20 12 20 % VOC_F = 0.38 × VCC, Positive IP, TA = 25°C 10
Fast Fault Error (low, negative IP) EFF(LOW)- -20 12 20 % VOC_F = 0.38 × VCC, Negative IP, TA = 25°C 10
Fast Fault Error (low, negative IP) EFF(LOW)- -30 18 30 % VOC_F = 0.38 × VCC, Negative IP, TA = 25°C to 125°C 10
Slow Fault Error (high) ESF(HIGH) -6 3 6 % VOC_S = 0.7 × VCC, IP rising 10
Slow Fault Error (low) ESF(LOW) -10 5 10 % VOC_S = 0.3 × VCC, IP rising 10
Supply Voltage VCC 6 V 3
Reverse Supply Voltage VRCC -0.5 V 3
Filter Voltage VFILTER 25 V 3
Reverse Filter Voltage VRFILTER -0.5 V 3
Reverse Output Voltage VRIOUT, VRFAULT_S, VRFAULT_F -0.5 V 3
Reverse Input Pin Voltages VROC_S, VROC_F -0.5 V 3
Maximum Continuous Current ICMAX 55 A TA = 25°C 3
Operating Ambient Temperature Range K TA -40 125 °C Range K 3
Junction Temperature TJ(max) 165 °C 3
Storage Temperature Tstg -65 170 °C 3
Clearance Dcl 7.5 mm Minimum distance through air from IP leads to signal leads 3
Creepage Dcr 7.5 mm Minimum distance along package body from IP leads to signal leads 3
Working Voltage for Basic Isolation VWVBI 870 VPK or VDC Basic (single) isolation according to UL 60950-1 (edition 2) 3
Working Voltage for Basic Isolation VWVBI 616 VRMS Basic (single) isolation according to UL 60950-1 (edition 2) 3
Human Body Model ESD VHBM -7 7 kV Per AEC-Q100 3
Charged Device Model ESD VCDM -1 1 kV Per AEC-Q100 3
Junction-to-Ambient Thermal Resistance RθJA 17 °C/W Mounted on the Allegro ASEK732/3 evaluation board 4
Junction-to-Lead Thermal Resistance RθJL 5 °C/W Mounted on the Allegro ASEK732/3 evaluation board 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper [2] The Allegro evaluation board has 1500 mm2 of 2 oz. copper on each side, connected to pins 1 through 4 and pins 5 through 8, with thermal vias 4

CAD (KiCad official)

  • Symbol: ACS720KLATR-35AB-T-4
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: acs720klatr-35ab-t-4-etched.step / acs720klatr-35ab-t-4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs720klatr-35ab-t-4.step / acs720klatr-35ab-t-4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (35 pp, sha256 c9ef0edb0725da48, retrieved 2026-11-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF