Generated by kicad-footprint-generator · KiCad file format 20260206
ACS718KMATR-20B-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS718KMATR-20B-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive input side); fused internally. |
| 2 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive input side); fused internally. |
| 3 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive input side); fused internally. |
| 4 | IP+ | passive | Terminal for the current being sensed (primary conductor, positive input side); fused internally. |
| 5 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side, where current exits the sensed path); fused internally. |
| 6 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side, where current exits the sensed path); fused internally. |
| 7 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side, where current exits the sensed path); fused internally. |
| 8 | IP- | passive | Terminal for the current being sensed (primary conductor, negative side, where current exits the sensed path); fused internally. |
| 9 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
| 10 | VCC | power_in | Device power supply terminal; operates from 4.5 V to 5.5 V (5 V nominal). |
| 11 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 12 | VIOUT | output | Analog output signal, proportional to the bidirectional primary current; ratiometric to VCC with a zero-current level of 0.5 × VCC. |
| 13 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 14 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 15 | GND | power_in | Signal ground terminal for the device. |
| 16 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 7 | V | 2 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 2 | |||
| Output Voltage | VIOUT | 25 | V | 2 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 2 | |||
| Maximum Continuous Current | ICMAX | 60 | V | TA = 25°C | 2 | ||
| Operating Ambient Temperature | TA | -40 | 125 | °C | Range K | 2 | |
| Junction Temperature | TJ(max) | 165 | °C | 2 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 2 | ||
| Human Body Model ESD Rating | VHBM | -8 | 8 | kV | 2 | ||
| Charged Device Model ESD Rating | VCDM | -1 | 1 | kV | 2 | ||
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| Supply Current | ICC | 7 | 9 | mA | VCC = 5 V, output open | 4 | |
| Output Capacitance Load | CL | 1 | nF | VIOUT to GND | 4 | ||
| Output Resistive Load | RL | 15 | kΩ | VIOUT to GND | 4 | ||
| Nonlinearity | ELIN | -1 | 1 | % | Across full range of IP | 4 | |
| Saturation Voltage Low | VOL | 0.3 | V | RL = RL(min) | 4 | ||
| Current Sensing Range | IPR | -20 | 20 | A | 6 | ||
| Total Output Error | ETOT | -5 | 5 | % | IP = IPR(max); TA = 25°C | 6 | |
| Total Output Error | ETOT | -2 | 2 | % | IP = IPR(max); TA = 85°C | 6 | |
| Total Output Error | ETOT | -3 | 3 | % | IP = IPR(max); TA = 125°C | 6 | |
| Sensitivity Error | ESENS | -4 | 4 | % | TA = 25°C; measured at IP = IPR(max) | 6 | |
| Sensitivity Error | ESENS | -2 | 2 | % | TA = 85°C; measured at IP = IPR(max) | 6 | |
| Sensitivity Error | ESENS | -3 | 3 | % | TA = 125°C; measured at IP = IPR(max) | 6 | |
| Voltage Offset Error | VOE | -40 | 40 | mV | TA = 25°C; IP = 0 A | 6 | |
| Voltage Offset Error | VOE | -10 | 10 | mV | TA = 85°C; IP = 0 A | 6 | |
| Voltage Offset Error | VOE | -15 | 15 | mV | TA = 125°C; IP = 0 A | 6 | |
| Sensitivity Error Lifetime Drift | ESENS_DRIFT | -2 | 2 | % | 6 | ||
| Total Output Error Lifetime Drift | ETOT_DRIFT | -2 | 2 | % | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | flows through the primary copper conduction path (from pins | 1 |
CAD (KiCad official)
- Symbol:
ACS718KMATR-20B-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs718kmatr-20b-t-etched.step/acs718kmatr-20b-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs718kmatr-20b-t.step/acs718kmatr-20b-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (17 pp, sha256
2182347bb9bf825d, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).