main
Ray Publish 0.1.3 15d4b35

ACS717KMATR-20B-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-16

ACS717KMATR-20B-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Terminal for the current being sensed, fused internally, forming part of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
2 IP+ passive Terminal for the current being sensed, fused internally, forming part of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
3 IP+ passive Terminal for the current being sensed, fused internally, forming part of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
4 IP+ passive Terminal for the current being sensed, fused internally, forming part of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
5 IP- passive Terminal for the current being sensed, fused internally, forming the return end of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
6 IP- passive Terminal for the current being sensed, fused internally, forming the return end of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
7 IP- passive Terminal for the current being sensed, fused internally, forming the return end of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
8 IP- passive Terminal for the current being sensed, fused internally, forming the return end of the primary conductor path (0.85 mΩ typical) that is electrically isolated from the signal pins.
9 NC unconnected No internal connection; recommended to be left unconnected to maintain high creepage.
10 VCC power_in Device power supply terminal, specified at 3.0 V to 3.6 V (3.3 V typical) with a 7 V absolute maximum supply voltage.
11 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
12 VIOUT output Analog output signal proportional to the bidirectional primary current, specified with a 15 kΩ minimum resistive load and a 1 nF maximum capacitive load to GND.
13 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
14 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
15 GND power_in Signal ground terminal for the sensor IC.
16 NC unconnected No internal connection; recommended to be left unconnected to maintain high creepage.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 3.3 3.6 V 4
Supply Current ICC 6 7.5 mA VCC(min) < VCC < VCC(max), output open 4
Output Capacitance Load CL 1 nF VIOUT to GND 4
Output Resistive Load RL 15 kΩ VIOUT to GND 4
Saturation Voltage, low VOL 0.3 V RL = RL(min) 4
Nonlinearity ELIN -1 1 % Across full range of IP 4
Current Sensing Range IPR -20 20 A 6
Total Output Error ETOT -5 5 % IP = IPR(max); TA = 25°C 6
Sensitivity Error ESENS -4 4 % TA = 25°C; measured at IP = IPR(max) 6
Voltage Offset Error VOE -40 40 mV TA = 25°C; IP = 0 A 6
Supply Voltage (absolute maximum) VCC 7 V 2
Reverse Supply Voltage VRCC -0.1 V 2
Output Voltage VIOUT 25 V 2
Reverse Output Voltage VRIOUT -0.1 V 2
Maximum Continuous Current ICMAX 60 A TA = 25°C 2
Operating Ambient Temperature TA -40 125 °C Range K 2
Junction Temperature TJ(max) 165 °C 2
Storage Temperature Tstg -65 165 °C 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper flows through the primary copper conduction path (from pins 1

CAD (KiCad official)

  • Symbol: ACS717KMATR-20B-T
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: acs717kmatr-20b-t-etched.step / acs717kmatr-20b-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs717kmatr-20b-t.step / acs717kmatr-20b-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (17 pp, sha256 9d71c89383b242db, retrieved 2026-11-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF