ACS714LLCTR-20A-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IP+	passive	Terminal for current being sampled, fused internally and electrically connected to pin 2; current path runs from pins 1 and 2 to pins 3 and 4 with 1.2 mΩ typical resistance.
2	IP+	passive	Terminal for current being sampled, fused internally and electrically connected to pin 1; current path runs from pins 1 and 2 to pins 3 and 4 with 1.2 mΩ typical resistance.
3	IP-	passive	Terminal for current being sampled, fused internally and electrically connected to pin 4; isolated from signal pins 5 through 8 (2.1 kVRMS minimum).
4	IP-	passive	Terminal for current being sampled, fused internally and electrically connected to pin 3; isolated from signal pins 5 through 8 (2.1 kVRMS minimum).
5	GND	power_in	Signal ground terminal.
6	FILTER	passive	Terminal for external capacitor CF to ground that sets the bandwidth (1 nF in the typical application).
7	VIOUT	output	Analog output signal proportional to the sampled current, with VCC×0.5 at 0 A; load must be at least 4.7 kΩ and at most 10 nF to GND.
8	VCC	power_in	Device power supply terminal, 4.5 V to 5.5 V (5.0 V typical), with 0.1 µF bypass capacitor.

Key specifications

Parameter	Value
Manufacturer	Allegro MicroSystems, LLC
Package	SOIC-8
Category	Sensors
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Supply Voltage	VCC	4.5	5	5.5	V		4
Supply Current	ICC		10	13	mA	VCC = 5.0 V, output open	4
Output Capacitance Load	CLOAD			10	nF	VIOUT to GND	4
Output Resistive Load	RLOAD	4.7			kΩ	VIOUT to GND	4
Symmetry	ESYM	98	100	102	%	Over full range of IP	4
Sensitivity (full temp)	Sens	94		104	mV/A	Over full range of IP, TA = -40°C to 150°C	6
Electrical Output Voltage	VOE	-40		40	mV	IP = 0 A	6
Total Output Error	ETOT	-5		5	%	IP = ±20 A, TA = -40°C to 150°C	6
Optimized Accuracy Range	IP	-20		20	A		6
Sensitivity (25°C)	Sens		100		mV/A	Over full range of IP, TA = 25°C	6
Noise	VNOISE(PP)		11		mV	Peak-to-peak, TA = 25°C, 100 mV/A programmed Sensitivity, CF = 47 nF, COUT = out, 2 kHz bandwidth	6
Zero Current Output Slope	∆VOUT(Q)		-0.34		mV/°C	TA = -40°C to 25°C	6
Zero Current Output Slope	∆VOUT(Q)		-0.07		mV/°C	TA = 25°C to 150°C	6
Sensitivity Slope	∆Sens		0.017		mV/A/°C	TA = -40°C to 25°C	6
Sensitivity Slope	∆Sens		-0.004		mV/A/°C	TA = 25°C to 150°C	6
Total Output Error	ETOT		1.5		%	IP = ±20 A, TA = 25°C (printed ±1.5)	6
Primary Conductor Resistance	RPRIMARY		1.2		mΩ	TA = 25°C	4
Rise Time	tr		3.5		μs	IP = IP(max), TA = 25°C, COUT = open	4
Frequency Bandwidth	f		80		kHz	-3 dB, TA = 25°C; IP is 10 A peak-to-peak	4
Nonlinearity	ELIN		1.5		%	Over full range of IP	4
Power-On Time	tPO		35		µs	Output reaches 90% of steady-state level, TJ=25°C, 20 A present on leadframe	4
Magnetic Coupling			12		G/A		4
Internal Filter Resistance	RF(INT)		1.7		kΩ		4
Operating Internal Leadframe Temperature (L range)	TA	-40		150	°C	L range	4
Supply Voltage	VCC			8	V		2
Reverse Supply Voltage	VRCC	-0.1			V		2
Output Voltage	VIOUT			8	V		2
Reverse Output Voltage	VRIOUT	-0.1			V		2
Output Current Source	IIOUT(Source)			3	mA		2
Output Current Sink	IIOUT(Sink)			10	mA		2
Overcurrent Transient Tolerance	IP			100	A	1 pulse, 100 ms	2
Nominal Operating Ambient Temperature (Range L)	TA	-40		150	°C	Range L	2
Maximum Junction Temperature	TJ(max)			165	°C		2
Storage Temperature	Tstg	-65		170	°C		2
Dielectric Strength Test Voltage	VISO			2100	VAC	Agency type-tested for 60 seconds per UL standard 60950-1, 1st Edition	2
Junction-to-Lead Thermal Resistance	RθJL		5		°C/W	Mounted on the Allegro ASEK 714 evaluation board	4
Junction-to-Ambient Thermal Resistance	RθJA		23		°C/W	Mounted on the Allegro 85-0322 evaluation board, includes the power consumed by the board	4

CAD (KiCad official)

Symbol: ACS714LLCTR-20A-T
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)
3D model files: acs714llctr-20a-t-etched.step / acs714llctr-20a-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs714llctr-20a-t.step / acs714llctr-20a-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Allegro MicroSystems, LLC datasheet (18 pp, sha256 8e85191c250bffbc, retrieved 2026-10-30, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

ACS714LLCTR-20A-T

Verified ACS714LLCTR-20A-T

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README