component
ACS71240LLCBTR-010B3
Public Made by Adomby adom
Allegro MicroSystems LLC Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS71240LLCBTR-010B3
Allegro MicroSystems LLC · Current Sensors · SOIC-8
ACS71240LLCBTR-010B3 from Allegro MicroSystems LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive terminal for the current being sensed; fused internally, and pins 1 and 2 are tied together on the conduction path. |
| 2 | IP+ | passive | Positive terminal for the current being sensed; fused internally, and pins 1 and 2 are tied together on the conduction path. |
| 3 | IP- | passive | Negative terminal for the current being sensed; fused internally, and pins 3 and 4 are tied together on the conduction path. |
| 4 | IP- | passive | Negative terminal for the current being sensed; fused internally, and pins 3 and 4 are tied together on the conduction path. |
| 5 | GND | power_in | Signal ground terminal for the device. |
| 6 | FAULT | output | Overcurrent fault output, active low, which is pulled low when an overcurrent condition is detected and returns to VCC through the external pull-up resistor. |
| 7 | VIOUT | output | Analog output signal, a voltage proportional to the measured current. |
| 8 | VCC | power_in | Device power supply terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems LLC |
| Package | SOIC-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V | 3.3 V variant | 6 |
| Supply Current | ICC | 7.5 | 12 | mA | 3.3 V variant, no load on VIOUT | 6 | |
| Output Capacitive Load | CL | 4.7 | nF | VIOUT to GND | 6 | ||
| Output Resistive Load | RL | 10 | kΩ | VIOUT to GND | 6 | ||
| Rise Time | tr | 3 | 4 | μs | TA = 25°C, CL = 1 nF | 6 | |
| Propagation Delay | tpd | 1.6 | 2.2 | μs | TA = 25°C, CL = 1 nF | 6 | |
| Response Time | tRESPONSE | 4 | 4.9 | μs | TA = 25°C, CL = 1 nF | 6 | |
| Nonlinearity | ELIN | -1 | 1 | % | Through full range of IP | 6 | |
| Output Saturation Voltage (low) | VSAT_L | 0.3 | V | RL = 10 kΩ | 6 | ||
| FAULT Current Hysteresis | IF(HYS) | 3 | 12 | % | Percent of IPR(MAX) | 7 | |
| FAULT Output Pullup Resistor | RPU | 10 | 500 | kΩ | 7 | ||
| FAULT Output Voltage | VOL | 0.3 | V | RPU = 10 kΩ, during fault condition | 7 | ||
| FAULT Response Time | tFAULT | 1.5 | 2.5 | µs | Input current step 20% above IFAULT, rise time ≤ 1 µs; 100 pF from FAULT to GND | 7 | |
| FAULT Error | EF | -10 | 3.5 | 10 | % | IFAULT, TA = 25°C | 7 |
| FAULT Error | EF | -10 | 5 | 10 | % | TA = -40°C or TA(MAX) | 7 |
| Optimized Sensing Range | IPR | -10 | 10 | A | 12 | ||
| Total Output Error | ETOT | -2 | 1 | 2 | % | IP = IPR(max), TA = 25°C to 150°C | 12 |
| Total Output Error | ETOT | -6 | 2.4 | 6 | % | IP = IPR(max), TA = -40°C to 25°C | 12 |
| Sensitivity Error | ESENS | -1.5 | 0.84 | 1.5 | % | IP = IPR(max), TA = 25°C to 150°C | 12 |
| Sensitivity Error | ESENS | -5.5 | 2.3 | 5.5 | % | IP = IPR(max), TA = -40°C to 25°C | 12 |
| Voltage Offset Error | VOE | -10 | 6.7 | 10 | mV | IP = 0 A, TA = 25°C to 150°C | 12 |
| Voltage Offset Error | VOE | -30 | 10 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 12 |
| Hall Plate Sensitivity Matching | Sensmatch | -1 | 1 | % | TA = 25°C | 6 | |
| Supply Voltage | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VCC(R) | -0.5 | V | 3 | |||
| Reverse Output Voltage | VIOUT(R) | -0.5 | V | 3 | |||
| FAULT Voltage | VFAULT | 25 | V | 3 | |||
| Reverse FAULT Voltage | VFAULT(R) | -0.5 | V | 3 | |||
| Maximum Continuous Current | ICMAX | 55 | A | TA = 25°C, SOIC-8 package | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 150 | °C | Range L (SOIC-8 package) | 3 | |
| Junction Temperature | TJ(MAX) | 165 | °C | 3 | |||
| Storage Temperature Range | Tstg | -65 | 170 | °C | 3 | ||
| Working Voltage for Basic Isolation | VWVBI | 420 | VPK or VDC | Basic (single) isolation per UL 60950-1 (edition 2) | 3 | ||
| Working Voltage for Basic Isolation | VWVBI | 297 | VRMS | Basic (single) isolation per UL 60950-1 (edition 2) | 3 | ||
| Clearance | Dcl | 4.2 | mm | Minimum distance through air from IP leads to signal leads | 3 | ||
| Creepage | Dcr | 4.2 | mm | Minimum distance along package body from IP leads to signal leads | 3 | ||
| Comparative Tracking Index | CTI | 400 | 599 | V | Material Group II | 3 | |
| Human Body Model ESD | VHBM | -6.5 | 6.5 | kV | Per AEC-Q100, SOIC-8 package | 3 | |
| Charged Device Model ESD | VCDM | -1 | 1 | kV | Per AEC-Q100 | 3 | |
| Common Mode Field Rejection | CMFR | 0.6 | mA/G | Offset due to DC common field, SOIC-8 package | 6 | ||
| Primary Conductor Resistance | RIP | 1.2 | mΩ | TA = 25°C, SOIC-8 package | 6 | ||
| Primary Conductor Inductance | LIP | 2 | nH | TA = 25°C, SOIC-8 package | 6 | ||
| Primary Hall Coupling Factor | G1 | 11 | G/A | TA = 25°C, SOIC-8 package | 6 | ||
| Secondary Hall Coupling Factor | G2 | -2.8 | G/A | TA = 25°C, SOIC-8 package | 6 | ||
| Output Slew Rate | SR | 0.53 | V/µs | TA = 25°C, CL = 1 nF | 6 | ||
| Bandwidth | BW | 120 | kHz | Small signal -3 dB; CL = 1 nF | 6 | ||
| Noise | IN | 78 | mARMS | VCC = 3.3 V, input referred, TA = 25°C, CL = 1 nF | 6 | ||
| Power Supply Rejection Ratio | PSRR | 40 | dB | VCC = VCC ±10%, TA = 25°C, DC to 1 kHz | 6 | ||
| Power Supply Rejection Ratio | PSRR | 30 | dB | VCC = VCC ±10%, TA = 25°C, 1 kHz to 20 kHz | 6 | ||
| Power Supply Rejection Ratio | PSRR | 20 | dB | VCC = VCC ±10%, TA = 25°C, 20 kHz to 60 kHz | 6 | ||
| Power-On Time | tPO | 80 | μs | TA = 25°C | 6 | ||
| Shorted Output-to-Ground Current | ISC(GND) | 30 | mA | TA = 25°C | 6 | ||
| Shorted Output-to-VCC Current | ISC(VCC) | 1.8 | mA | TA = 25°C | 6 | ||
| Sensitivity | Sens | 132 | mV/A | IPR(min) < IP < IPR(max) | 12 | ||
| Zero-Current Output Voltage | VIOUT(Q) | 1.65 | V | Bidirectional, IP = 0 A | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 1500 mm2 of 4 oz. copper (0.1388 mm) connected to pins 1 and 2, | 20 |
CAD (KiCad official)
- Symbol:
ACS71240LLCBTR-010B3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
acs71240llcbtr-010b3-etched.step/acs71240llcbtr-010b3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs71240llcbtr-010b3.step/acs71240llcbtr-010b3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems LLC datasheet (25 pp, sha256
bb47820aa99ea699, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).