component
ACPL-M60L-500E
Public Made by Adomby adom
Broadcom AVAGO Logic Output Optoisolators, SOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownACPL-M60L-500E
Broadcom AVAGO · Logic Output Optoisolators · SOP-5
ACPL-M60L-500E from Broadcom AVAGO, in a SOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | input | LED anode input; the datasheet gives an average forward input current maximum of 20 mA, a recommended high-level input current of 6.3 mA to 10 mA, and a low-level input current of 0 to 250 µA. |
| 3 | CATHODE | input | LED cathode; the reverse input voltage must not exceed 5 V. |
| 4 | GND | power_in | Ground reference for the output stage and supply; a 0.1 µF bypass capacitor must be connected between pins 6 and 4, within 20 mm total lead length. |
| 5 | VO | output | Open-collector Schottky-clamped output requiring an external pull-up resistor of 330 Ω to 4 kΩ; output collector current is limited to 50 mA and output collector voltage to 7 V. |
| 6 | VCC | power_in | Supply voltage of 2.7 V to 3.6 V or 4.5 V to 5.5 V, with a 7 V maximum for 1 minute; a 0.1 µF bypass capacitor is required between this pin and pin 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom AVAGO |
| Package | SOP-5 |
| Category | Optoisolators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TS | -55 | 125 | ˚C | 5 | ||
| Operating Temperature | TA | -40 | 85 | ˚C | 5 | ||
| Average Forward Input Current | IF | 20 | mA | Average; see note 1 | 5 | ||
| Reverse Input Voltage | VR | 5 | V | 5 | |||
| Input Power Dissipation | PI | 40 | mW | 5 | |||
| Supply Voltage (1 minute maximum) | VCC | 7 | V | 1 minute maximum | 5 | ||
| Output Collector Current | IO | 50 | mA | 5 | |||
| Output Collector Voltage | VO | 7 | V | 5 | |||
| Output Collector Power Dissipation | PO | 85 | mW | 5 | |||
| Input Current, Low Level | IFL | 0 | 250 | µA | Off condition; see footnote * (VFL ≤ 0.8 V) | 5 | |
| Input Current, High Level | IFH | 5 | 15 | mA | Initial switching threshold 5 mA or less; 6.3 mA to 10 mA recommended | 5 | |
| Power Supply Voltage (3.3 V operation) | VCC | 2.7 | 3.6 | V | TA = -40°C to +85°C | 5 | |
| Power Supply Voltage (5 V operation) | VCC | 4.5 | 5.5 | V | TA = -40°C to +85°C | 5 | |
| Operating Temperature | TA | -40 | 85 | ˚C | 5 | ||
| Output Pull-up Resistor | RL | 330 | Ω | 5 | |||
| Output Pull-up Resistor | RL | 4 | kΩ | 5 | |||
| Minimum External Air Gap (Clearance) | L (I01) | 5 | mm | Measured from input terminals to output terminals | 5 | ||
| Minimum External Tracking Path (Creepage) | L (I02) | 5 | mm | Measured from input terminals to output terminals | 5 | ||
| Minimum Internal Plastic Gap (Clearance) | 0.08 | mm | Through insulation distance, conductor to conductor | 5 | |||
| Tracking Resistance | CTI | 175 | V | DIN IEC 112/VDE 0303 Part 1 | 5 | ||
| High Level Output Current (3.3 V) | IOH | 4.5 | 50 | µA | VCC = 3.3 V, VO = 3.3 V, IF = 250 µA | 6 | |
| Input Threshold Current (3.3 V) | ITH | 3 | 5 | mA | VCC = 3.3 V, VO = 0.6 V, IOL (Sinking) = 13 mA | 6 | |
| Low Level Output Voltage (3.3 V) | VOL | 0.35 | 0.6 | V | VCC = 3.3 V, IF = 5 mA, IOL (Sinking) = 13 mA | 6 | |
| High Level Supply Current (3.3 V) | ICCH | 4.7 | 7 | mA | IF = 0 mA, VCC = 3.3 V | 6 | |
| Low Level Supply Current (3.3 V) | ICCL | 7 | 10 | mA | IF = 10 mA, VCC = 3.3 V | 6 | |
| Input Forward Voltage (3.3 V table) | VF | 1.4 | 1.5 | 1.75 | V | TA = 25˚C, IF = 10 mA | 6 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 µA | 6 | ||
| Input-Output Insulation | VISO | 3750 | VRMS | RH ≤ 50%, t = 1 min. | 6 | ||
| High Level Output Current (5 V) | IOH | 5.5 | 100 | µA | VCC = 5.5 V, VO = 5.5 V, IF = 250 µA | 6 | |
| Input Threshold Current (5 V) | ITH | 2 | 5 | mA | VCC = 5.5 V, IO ≥13 mA, VO = 0.6 V | 6 | |
| Low Level Output Voltage (5 V) | VOL | 0.4 | 0.6 | V | VCC = 5.5 V, IF = 5 mA, IOL (Sinking) = 13 mA | 6 | |
| High Level Supply Current (5 V) | ICCH | 4 | 7.5 | mA | VCC = 5.5 V, IF = 0 mA | 6 | |
| Low Level Supply Current (5 V) | ICCL | 6 | 10.5 | mA | VCC = 5.5 V, IF = 10 mA | 6 | |
| Input Forward Voltage (5 V table) | VF | 1.4 | 1.5 | 1.75 | V | TA = 25°C, IF = 10 mA | 6 |
| Input Forward Voltage (5 V table, second row) | VF | 1.3 | 1.85 | V | IF = 10 mA | 6 | |
| Input Reverse Breakdown Voltage (5 V) | BVR | 5 | V | IR = 10 µA | 6 | ||
| Propagation Delay Time to High Output Level (3.3 V) | tPLH | 90 | ns | RL = 350 Ω, CL = 15 pF | 7 | ||
| Propagation Delay Time to Low Output Level (3.3 V) | tPHL | 75 | ns | RL = 350 Ω, CL = 15 pF | 7 | ||
| Pulse Width Distortion (3.3 V) | /tPHL, tPLH/ | 25 | ns | RL = 350 Ω, CL = 15 pF | 7 | ||
| Propagation Delay Skew (3.3 V) | tPSK | 40 | ns | RL = 350 Ω, CL = 15 pF | 7 | ||
| Output Rise Time (10-90%) (3.3 V) | tr | 45 | ns | RL = 350 Ω, CL = 15 pF | 7 | ||
| Output Fall Time (90-10%) (3.3 V) | tf | 20 | ns | RL = 350 Ω, CL = 15 pF | 7 | ||
| Propagation Delay Time to High Output Level (5 V) | tPLH | 20 | 48 | 75 | ns | TA = 25°C, RL=350 Ω, CL=15pF | 7 |
| Propagation Delay Time to High Output Level (5 V, over temperature) | tPLH | 100 | ns | RL=350 Ω, CL=15pF | 7 | ||
| Propagation Delay Time to Low Output Level (5 V) | tPHL | 25 | 50 | 75 | ns | TA = 25°C, RL=350 Ω, CL=15pF | 7 |
| Propagation Delay Time to Low Output Level (5 V, over temperature) | tPHL | 100 | ns | RL=350 Ω, CL=15pF | 7 | ||
| Pulse Width Distortion (5 V) | /tPHL - tPLH/ | 3.5 | 35 | ns | RL= 350 Ω, CL = 15 pF | 7 | |
| Propagation Delay Skew (5 V) | tPSK | 40 | ns | RL= 350 Ω, CL = 15 pF | 7 | ||
| Output Rise Time (10%-90%) (5 V) | trise | 24 | ns | RL= 350 Ω, CL = 15 pF | 7 | ||
| Output Fall Time (10%-90%) (5 V) | tfall | 10 | ns | RL= 350 Ω, CL = 15 pF | 7 | ||
| Logic High Common Mode Transient Immunity (3.3 V) | /CMH/ | 15000 | 25000 | V/µs | /VCM/ = 1000 V, VCC = 3.3 V, IF = 0 mA, VO(MIN) = 2 V, RL = 350 Ω, TA = 25˚C | 8 | |
| Logic High Common Mode Transient Immunity (5 V) | /CMH/ | 10000 | 15000 | V/µs | VCC = 5 V, IF = 0 mA, VO(MIN) = 2 V, RL = 350 Ω, TA = 25˚C | 8 | |
| Logic Low Common Mode Transient Immunity (3.3 V) | /CML/ | 15000 | 25000 | V/µs | /VCM/ = 1000 V, VCC = 3.3 V, IF = 7.5 mA, VO(MAX) = 0.8 V, RL = 350 Ω, TA = 25˚C | 8 | |
| Logic Low Common Mode Transient Immunity (5 V) | /CML/ | 10000 | 15000 | V/µs | VCC = 5 V, IF = 7.5 mA, VO(MIN) = 0.8 V, RL = 350 Ω, TA = 25˚C | 8 |
CAD (KiCad official)
- Symbol:
ACPL-M60L-500E - Footprint:
Package_SO:SOIC-5-6_4.4x3.6mm_P1.27mm - 3D model: SOP-5 (KiCad packages3D, STEP)
- 3D model files:
acpl-m60l-500e-etched.step/acpl-m60l-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acpl-m60l-500e.step/acpl-m60l-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom AVAGO datasheet (11 pp, sha256
2b7a298d298cf315, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).