3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownACPL-K34T-000E
Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8
ACPL-K34T-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | input | LED anode input; recommended LED drive current IF(ON) is 7 to 13 mA, with 20 mA maximum average input current. |
| 2 | NC | unconnected | No internal connection per the functional diagram, though note 10 says pin 2 must be connected to LED common for the CMR tests. |
| 3 | CATHODE | input | LED cathode input; the datasheet recommends driving the LED with a CMOS buffer connected at the cathode and using split limiting resistors for high CMR. |
| 4 | NC | unconnected | No internal connection per the functional diagram, though note 10 says pin 4 must be connected to LED common for the CMR tests. |
| 5 | NC | unconnected | No internal connection on the output side. |
| 6 | VEE | power_in | Negative output supply (ground reference) for the output IC; VCC - VEE is 10 V to 20 V recommended and 25 V absolute maximum, with at least a 1 µF bypass capacitor to VCC. |
| 7 | VOUT | output | Rail-to-rail gate drive output with 2.5 A absolute maximum peak output current, held low until VCC - VEE exceeds the UVLO+ threshold (8.6 V typical). |
| 8 | VCC | power_in | Positive output supply; recommended VCC - VEE is 10 V to 20 V (25 V absolute maximum), with a minimum 1 µF bypass capacitor connected between VCC and VEE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature | TA | -40 | 125 | °C | 4 | ||
| Output Supply Voltage (VCC - VEE) | VCC-VEE | 10 | 20 | V | 4 | ||
| Input Current (ON) | IF(ON) | 7 | 13 | mA | 4 | ||
| Input Voltage (OFF) | VF(OFF) | -5.5 | 0.8 | V | 4 | ||
| Storage Temperature | TS | -55 | 150 | °C | 4 | ||
| Operating Temperature | TA | -40 | 125 | °C | 4 | ||
| IC Junction Temperature | TJ | 150 | °C | 4 | |||
| Average Input Current | IF(AVG) | 20 | mA | 4 | |||
| Peak Input Current | IF(PEAK) | 40 | mA | 50% duty cycle, < 1 ms pulse width | 4 | ||
| Peak Transient Input Current | IF(TRAN) | 1 | A | <1 µs pulse width, 300 pps | 4 | ||
| Reverse Input Voltage | VR | 6 | V | 4 | |||
| High Peak Output Current | IOH(PEAK) | 2.5 | A | 4 | |||
| Low Peak Output Current | IOL(PEAK) | 2.5 | A | 4 | |||
| Total Output Supply Voltage (VCC - VEE) | VCC-VEE | 0 | 25 | V | 4 | ||
| Output Voltage | VO(PEAK) | -0.5 | V | maximum printed as VCC | 4 | ||
| Output IC Power Dissipation | PO | 500 | mW | 4 | |||
| Total Power Dissipation | PT | 550 | mW | 4 | |||
| High Level Peak Output Current | IOH | -3.5 | -2 | A | VCC, VO = 10 V | 4 | |
| Low Level Peak Output Current | IOL | 2 | 4.4 | A | VO, VEE = 10 V | 4 | |
| High Output Transistor RDS(ON) | RDS,OH | 2.2 | 4 | Ω | IOH = -2.0 A | 4 | |
| Low Output Transistor RDS(ON) | RDS,OL | 1 | 2 | Ω | IOL = 2.0 A | 4 | |
| Low Level Output Voltage | VOL | 0.1 | 0.25 | V | IO = 100 mA | 4 | |
| High Level Supply Current | ICCH | 2.5 | 3.9 | mA | IF = 10 mA | 4 | |
| Low Level Supply Current | ICCL | 2.5 | 3.9 | mA | VF = 0 V | 4 | |
| Threshold Input Current Low to High | IFLH | 1.5 | 4.9 | mA | VO > 5 V | 4 | |
| Threshold Input Voltage High to Low | VFHL | 0.8 | V | 4 | |||
| Input Forward Voltage | VF | 1.25 | 1.5 | 1.85 | V | IF = 10 mA | 4 |
| Input Reverse Breakdown Voltage | BVR | 6 | V | IR = 100 µA | 4 | ||
| UVLO Threshold VUVLO+ | VUVLO+ | 8.1 | 8.6 | 9.1 | V | VO > 5 V, IF = 10 mA | 4 |
| UVLO Threshold VUVLO- | VUVLO- | 7.1 | 7.6 | 8.1 | V | 4 | |
| UVLO Hysteresis | UVLOHYS | 0.5 | 1 | V | 4 | ||
| Propagation Delay Time to High Output Level | tPLH | 30 | 60 | 110 | ns | VCC = 10 V, RG = 4.7Ω, CL = 10 nF, f = 200 kHz, Duty Cycle = 50%, Vin = 4.5 V, 5.5 V, Rin = 350 Ω | 5 |
| Propagation Delay Time to Low Output Level | tPHL | 30 | 60 | 110 | ns | VCC = 10 V, RG = 4.7Ω, CL = 10 nF, f = 200 kHz, Duty Cycle = 50%, Vin = 4.5 V, 5.5 V, Rin = 350 Ω | 5 |
| Pulse Width Distortion (tPHL-tPLH) | PWD | -40 | 0 | 40 | ns | 5 | |
| Dead Time Distortion Caused by Any Two Parts (tPLH-tPHL) | DTD | -40 | 50 | ns | 5 | ||
| Rise Time | tR | 10 | 30 | ns | VCC = 10 V, CL = 1 nF, f = 200 kHz, Duty Cycle = 50%, Vin = 4.5 V- 5.5 V, Rin = 350 Ω | 5 | |
| Fall Time | tF | 10 | 30 | ns | VCC = 10 V, CL = 1 nF, f = 200 kHz, Duty Cycle = 50%, Vin = 4.5 V- 5.5 V, Rin = 350 Ω | 5 | |
| Output High Level Common Mode Transient Immunity | /CMH/ | 50 | kV/µs | TA = 25 °C, VCC = 20 V, VCM=1500 V, with split resistors; typical >75 | 5 | ||
| Output Low Level Common Mode Transient Immunity | /CML/ | 50 | kV/µs | 5 | |||
| Input-Output Momentary Withstand Voltage | VISO | 5000 | VRMS | RH < 50%, t = 1 min, TA = 25 °C | 5 | ||
| Input Forward Voltage Temperature Coefficient | DVF/DTA | -1.5 | mV/°C | 4 | |||
| Input Capacitance | CIN | 90 | pF | f = 1 MHz, VF = 0 V | 4 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f =1 MHz | 5 | ||
| Thermal resistance die1 due to die1 (low conductivity board) | R11 | 191 | °C/W | low conductivity board | 14 | ||
| Thermal resistance die1 due to die1 (high conductivity board) | R11 | 155 | °C/W | high conductivity board | 14 | ||
| Thermal resistance die1 due to die2 (low conductivity board) | R12 | 68.5 | °C/W | low conductivity board | 14 | ||
| Thermal resistance die1 due to die2 (high conductivity board) | R12 | 64 | °C/W | high conductivity board | 14 | ||
| Thermal resistance die2 due to die1 (low conductivity board) | R21 | 68.5 | °C/W | low conductivity board | 14 | ||
| Thermal resistance die2 due to die1 (high conductivity board) | R21 | 64 | °C/W | high conductivity board | 14 | ||
| Thermal resistance die2 due to die2 (low conductivity board) | R22 | 77 | °C/W | low conductivity board | 14 | ||
| Thermal resistance die2 due to die2 (high conductivity board) | R22 | 41 | °C/W | high conductivity board | 14 |
CAD (KiCad official)
- Symbol:
ACPL-K34T-000E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
acpl-k34t-000e-etched.step/acpl-k34t-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acpl-k34t-000e.step/acpl-k34t-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (15 pp, sha256
ec94f5cd5d9f6e0e, retrieved 2026-11-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).