component
ACPL-217
Public Made by Adomby adom
AOTE Transistor, Photovoltaic Output Optoisolators, SSOP-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownACPL-217
AOTE · Transistor, Photovoltaic Output Optoisolators · SSOP-4
ACPL-217 from AOTE, in a SSOP-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | input | LED anode on the input side; the datasheet rates reverse voltage VR at 6 V and forward current IF at 50 (printed with unit 'A', likely mA). |
| 2 | Cathode | passive | LED cathode on the input side; the reverse voltage limit VR is 6 V per the absolute maximum ratings. |
| 3 | Emitter | passive | Phototransistor emitter on the output side; the emitter-collector voltage VECO is rated 7 V. |
| 4 | Collector | passive | Phototransistor collector on the output side; the collector-emitter voltage VCEO is rated 80 V and collector current IC is 50 (printed with unit 'A', likely mA). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AOTE |
| Package | SSOP-4 |
| Category | Optoisolators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Voltage | VF | 1.2 | 1.4 | V | IF=20mA | 5 | |
| Reverse Current | IR | 10 | A | VR=4V | 5 | ||
| Terminal Capacitance | Ct | 30 | 250 | F | V=0, F=1KHz | 5 | |
| Collector Dark Current | ICEO | 100 | A | VCE=20V, IF=0 | 5 | ||
| Collector-Emitter Breakdown Voltage | BVCEO | 80 | V | IC=0.1mA, IF=0 | 5 | ||
| Emitter-Collector Voltage | BVECO | 7 | V | IE=0.01mA, IF=0 | 5 | ||
| Current Transfer Ratio | CTR | 80 | 600 | % | IF=5mA, VCE=5V | 5 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.1 | 0.2 | V | IF=10mA, IC=1mA | 5 | |
| Isolation capacitance | CISO | 0.3 | 1 | F | V=0, F=1MHz | 5 | |
| Rise Time | Tr | 3 | 18 | µs | VCE=2V, IC=2mA, RL=100Ω | 5 | |
| Fall Time | Tf | 2 | 18 | µs | 5 | ||
| Forward Current | IF | 50 | A | 4 | |||
| Peak forward current | IFP | 1000 | A | 1us, pulse | 4 | ||
| Reverse Voltage | VR | 6 | V | 4 | |||
| Power Dissipation | PD | 70 | W | 4 | |||
| Collector Power Dissipation | PC | 150 | W | 4 | |||
| Collector Current | IC | 50 | A | 4 | |||
| Collector-Emitter Voltage | VCEO | 80 | V | 4 | |||
| Emitter-Collector Voltage | VECO | 7 | V | 4 | |||
| Total Power Dissipation | Ptot | 200 | W | 4 | |||
| Isolation Voltage | Viso | 3750 | Vrms | 4 | |||
| Isolation Voltage (insulation test) | Viso | 3750 | Vrms | For 1 min | 4 | ||
| Peak Isolation Voltage | VIORM | 600 | Vpeak | DIN/EN/IEC EN60747-5-5 | 4 | ||
| Transient isolation voltage | VIOTM | 5000 | Vpeak | DIN/EN/IEC EN60747-5-5 | 4 | ||
| Operating Temperature | Topr | -55 | 110 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 | ||
| Soldering Temperature | Tsol | 260 | ℃ | 4 | |||
| Preheat Temperature | Ts | 150 | 200 | ℃ | Reflow profile | 8 | |
| Preheat Time | ts | 60 | 120 | s | Reflow profile | 8 | |
| Ramp-Up Rate (TL to TP) | 3 | ℃/s | Reflow profile | 8 | |||
| Time Above TL | L | 60 | 150 | s | Reflow profile | 8 | |
| Peak Temperature | TP | 260 | ℃ | Reflow profile | 8 | ||
| Time During Which Tc Is Between (TP -5) and TP | tp | 30 | s | Reflow profile | 8 | ||
| Ramp-down Rate (TP to TL) | 6 | ℃/s | Reflow profile | 8 | |||
| Hand soldering iron temperature | 360 | ℃ | ±5℃, within 3s; rework or sample testing only | 9 |
CAD (KiCad official)
- Symbol:
ACPL-217 - Footprint:
Package_SO:SSOP-4_4.4x2.6mm_P1.27mm - 3D model: SSOP-4, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
acpl-217-etched.step/acpl-217-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acpl-217.step/acpl-217.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AOTE datasheet (12 pp, sha256
63d3bae5b0b804a8, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).