ACHS-7125-500E

{
  "slug": "achs-7125-500e",
  "version": "0.1.0",
  "type": "component",
  "description": "AVAGO(Broadcom) Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "achs-7125-500e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "achs-7125-500e.kicad_sym",
    "achs-7125-500e.kicad_mod",
    "achs-7125-500e.glb",
    "achs-7125-500e.step",
    "achs-7125-500e.lbr",
    "docs/hero.png",
    "docs/achs-7125-500e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "achs-7125-500e-hero.glb",
    "achs-7125-500e-hero.overlay.json",
    "achs-7125-500e-etched.glb"
  ],
  "component": {
    "mpn": "ACHS-7125-500E",
    "manufacturer": "AVAGO(Broadcom)",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/524e871dd475b2904954097d7175a739.pdf",
    "parts": {
      "symbol": "achs-7125-500e.kicad_sym",
      "footprint": "achs-7125-500e.kicad_mod",
      "model_3d": "achs-7125-500e-hero.glb",
      "model_3d_plain": "achs-7125-500e-etched.glb",
      "model_3d_step": "achs-7125-500e-etched.step",
      "model_3d_step_plain": "achs-7125-500e.step",
      "lbr": "achs-7125-500e.lbr"
    },
    "distributor_links": {
      "lcsc": "C2155524",
      "digikey": "ACHS-7125-500E-ND",
      "mouser": "630-ACHS-7125-500E"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T00:05:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ACHS-7125-500E-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "630-ACHS-7125-500E",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sampled, fused internally; pins 1 and 2 are shorted together on the input side, and the ACHS-7125 input peak current range is ±50 A (valid up to 85°C ambient, derated above that on 4-oz copper PCB), with primary conductor lead temperature limited to +150°C."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sampled, fused internally; pins 1 and 2 are shorted together on the input side, and the ACHS-7125 input peak current range is ±50 A (valid up to 85°C ambient, derated above that on 4-oz copper PCB), with primary conductor lead temperature limited to +150°C."
      },
      {
        "number": "3",
        "name": "IP-",
        "type": "passive",
        "description": "Terminal for the current being sampled, fused internally; pins 3 and 4 are shorted together on the input side, and the ACHS-7125 input peak current range is ±50 A (valid up to 85°C ambient, derated above that on 4-oz copper PCB), with primary conductor lead temperature limited to +150°C."
      },
      {
        "number": "4",
        "name": "IP-",
        "type": "passive",
        "description": "Terminal for the current being sampled, fused internally; pins 3 and 4 are shorted together on the input side, and the ACHS-7125 input peak current range is ±50 A (valid up to 85°C ambient, derated above that on 4-oz copper PCB), with primary conductor lead temperature limited to +150°C."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Output-side ground reference; the datasheet requires a 1 µF bypass capacitor between pins 8 and 5 and states the signal leads (pins 5 through 8) are electrically isolated from the primary conductor."
      },
      {
        "number": "6",
        "name": "FILTER",
        "type": "passive",
        "description": "Filter pin to set the output bandwidth (80 kHz typ. with a 1 nF ceramic capacitor CF connected from FILTER to GND), replacing an external RC filter on VOUT."
      },
      {
        "number": "7",
        "name": "VOUT",
        "type": "output",
        "description": "Ratiometric analog output voltage proportional to the input current, with zero-current level VDD/2 and a maximum output current of 10 mA source or sink; output capacitance load limited to 10 nF and resistive load at least 4.7 kΩ."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage relative to GND, recommended 4.5 V to 5.5 V (absolute maximum 8.0 V), with a 1 µF bypass capacitor to pin 5 recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: ACHS-7125-500E is listed as the surface-mount, tape-and-reel (1500 per reel, RoHS) option of the ACH; Pins 1-4 are classified as passive because the datasheet describes them only as current-sampling ter; Pin descriptions combine the pin-table text with limits stated elsewhere in the datasheet (recommend"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0611,
        "at": "2026-10-31T00:04:58"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/524e871dd475b2904954097d7175a739.pdf",
        "pages": 16,
        "sha256": "59de3513c95eaf39",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "achs-7125-500e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "achs-7125-500e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "afff55a1c85e4258191ec0e249f47fd88621795154e4e96a0431032ce4572db0",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}