component
ABS206L
Public Made by Adomby adom
NH Bridge Rectifiers, ABS. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownABS206L
NH · Bridge Rectifiers · ABS
ABS206L from NH, in a ABS. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output Cathode(-) | power_out | Negative DC output terminal of the bridge rectifier, with polarity marked on the case ("-" mark). |
| 2 | Output Anode(+) | power_out | Positive DC output terminal of the bridge rectifier, with polarity marked on the case ("+" mark). |
| 3 | Input Pin(~) | input | AC input terminal of the bridge rectifier; the datasheet labels it only as an input pin (~) and gives no further electrical limits for this pin. |
| 4 | Input Pin(~) | input | AC input terminal of the bridge rectifier; the datasheet labels it only as an input pin (~) and gives no further electrical limits for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NH |
| Package | ABS |
| Category | Diodes |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 600 | V | 1 | |||
| Maximum RMS Voltage | VRMS | 420 | V | 1 | |||
| Maximum DC Blocking Voltage | VDC | 600 | V | 1 | |||
| Maximum Average Forward Rectified Current | IF(AV) | 2 | A | TC=100°C (see fig.1) | 1 | ||
| Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) | IFSM | 70 | A | 8.3ms single half sine-wave, JEDEC method | 1 | ||
| Current Squared Time Per Diode | I2t | 20.34 | A2sec | t<8.3ms | 1 | ||
| Maximum Forward Voltage Per Diode | VFM | 0.98 | V | IF= 2.0 A (Note 1: pulse test 300 µs, 1% duty cycle) | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage (Ta=25℃) | IRRM | 5 | uA | Ta=25℃ | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage (Ta=125℃) | IRRM | 300 | uA | Ta=125℃ | 1 | ||
| Typical Junction Capacitance Per Diode | CJ | 35 | pF | 4V, 1MHz | 1 | ||
| Operating Junction Temperature Range | TJ | -55 | 150 | ℃ | 1 | ||
| Storage Temperature Range | TSTD | -55 | 150 | ℃ | 1 | ||
| Typical thermal resistance (junction to ambient) | RθJA | 70 | ℃/W | Mounted on glass epoxy PC board with 4×1.5"×1.5" copper pad (Note 2) | 1 |
CAD (KiCad official)
- Symbol:
ABS206L - Footprint:
Diode_SMD:Diode_Bridge_Diotec_ABS - 3D model: ABS (KiCad packages3D, STEP)
- 3D model files:
abs206l-etched.step/abs206l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);abs206l.step/abs206l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NH datasheet (5 pp, sha256
928593d1bcd00240, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).