component
ABS1-10
Public Made by Adomby adom
Shandong Jingdao Microelectronics Bridge Rectifiers, ABS. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownABS1-10
Shandong Jingdao Microelectronics · Bridge Rectifiers · ABS
ABS1-10 from Shandong Jingdao Microelectronics, in a ABS. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | - | power_out | DC negative output terminal of the glass-passivated bridge rectifier, rated for reverse voltage up to 1000 V for the ABS10-10 variant and 100 V for ABS1-10. |
| 2 | + | power_out | DC positive output terminal of the bridge rectifier, supplying up to 1 A forward current. |
| 3 | Input Pin (~) | passive | AC input terminal of the bridge rectifier; the part is rated for 1 A forward current with high surge capability. |
| 4 | Input Pin (~) | passive | AC input terminal of the bridge rectifier; the part is rated for 1 A forward current with high surge capability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shandong Jingdao Microelectronics |
| Package | ABS |
| Category | Diodes |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 100 | V | 1 | |||
| Maximum RMS Voltage | VRMS | 70 | V | 1 | |||
| Maximum DC Blocking Voltage | VDC | 100 | V | 1 | |||
| Average Rectified Output Current | IO | 1 | A | at Tc = 125 °C | 1 | ||
| Peak Forward Surge Current | IFSM | 35 | A | 8.3 ms single half sine wave superimposed on rated load (JEDEC method) | 1 | ||
| Forward Voltage per element | VF | 1.1 | V | @IF = 1.0 A | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | 5 | μA | @TA = 25 °C | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | 50 | μA | @TA = 100 °C | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | 100 | μA | @TA = 125 °C | 1 | ||
| Operating and Storage Temperature Range | Tj, Tstg | -55 | 150 | °C | 1 | ||
| Typical Junction Capacitance | Cj | 13 | pF | Measured at 1MHz and applied reverse voltage of 4 V DC (Note 1) | 1 | ||
| Typical Thermal Resistance, junction to ambient | RθJA | 72 | °C/W | Mounted on glass epoxy PC board with 4×1.5"×1.5" (3.81×3.81 cm) copper pad (Note 2) | 1 | ||
| Typical Thermal Resistance, junction to case | RθJC | 20 | °C/W | Note 2: mounted on glass epoxy PC board with 4×1.5"×1.5" copper pad | 1 |
CAD (KiCad official)
- Symbol:
ABS1-10 - Footprint:
Diode_SMD:Diode_Bridge_Diotec_ABS - 3D model: ABS (KiCad packages3D, STEP)
- 3D model files:
abs1-10-etched.step/abs1-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);abs1-10.step/abs1-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shandong Jingdao Microelectronics datasheet (3 pp, sha256
0cba158f268a5681, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).