main
History Download
Ray a7985atr: specified limits as data (metadata.characteristics, 40 rows from the datasheet) 1d24bf6

A7985ATR

STMicroelectronics · DC-DC Converters · SOIC-8

A7985ATR from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulator output voltage with maximum voltage range -0.3 to VCC per Table 2.
2 SYNCH bidirectional Master/slave synchronization signal; outputs 180° phase-shifted signal when floating, synchronizes to external clock with input range 2-3.3V high / 0-1V low per Table 4.
3 EN input Active-high enable control; device ON when > 1.2V, OFF when < 0.3V, with internal pull-down per Section 5.5.
4 COMP output Error amplifier output for compensation network; output swing 0-3.3V with 19mA source current and 30mA sink current per Table 4.
5 FB input Feedback input for output voltage regulation; compared to internal 0.6V reference with voltage range -0.3 to 1.5V per Table 2.
6 FSW input Switching frequency select input; external resistor to GND sets frequency up to 1MHz, default 250kHz when floating, typical pin voltage 1.254V per Table 4.
7 GND power_in Ground reference return.
8 VCC power_in Unregulated DC input voltage; operating range 4.5 to 38V with 4.5V turn-on threshold per Table 2.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage Vcc 45 V 7
Output DC voltage OUT -0.3 V 7
Analog pin voltage (FSW, COMP, SYNCH) FSW, COMP, SYNCH -0.3 4 V 7
Enable pin voltage EN -0.3 V 7
Feedback voltage FB -0.3 1.5 V 7
Power dissipation PTOT 2 W TA < 60 °C, HSOP8 7
Junction temperature range TJ -40 150 °C 7
Storage temperature range Tstg -55 150 °C 7
Maximum thermal resistance junction ambient Rth(JA) 40 °C/W HSOP8, package mounted on demonstration board 7
Operating input voltage range VCC 4.5 38 V 8
Turn-on VCC threshold VCCON 4.5 V 8
VCC UVLO hysteresis VCCHYS 0.1 0.4 V 8
MOSFET on-resistance RDS(on) 200 400 m 8
Maximum limiting current ILIM 2.5 3.5 A 8
Switching frequency FSW 210 250 275 kHz 8
FSW pin voltage VFSW 1.254 V 8
Duty cycle D 0 100 % 8
Feedback voltage VFB 0.588 0.6 0.612 V 4.5 V < VCC < 38 V 8
Quiescent current IQ 2.4 mA Duty cycle = 0, VFB = 0.8 V 8
Total standby quiescent current IQST-BY 20 30 A 8
EN threshold voltage (device OFF level) VEN 0.3 V Device OFF level 8
EN threshold voltage (device ON level) VEN 1.2 V Device ON level 8
EN current IEN 7.5 10 µA EN = VCC 8
Soft-start duration TSS 7.3 8.2 9.8 ms FSW pin floating 8
High level output voltage (error amplifier) VCH 3 V VFB < 0.6 V 8
Low level output voltage (error amplifier) VCL 0.1 V VFB > 0.6 V 8
High input voltage (synchronization) VS_IN,HI 2 3.3 V 9
Low input voltage (synchronization) VS_IN,LO 1 V 9
Input pulse width (synchronization) tS_IN_PW 100 ns VS_IN,HI = 3 V, VS_IN,LO = 0 V 9
Input pulse width (synchronization) tS_IN_PW 300 ns VS_IN,HI = 2 V, VS_IN,LO = 1 V 9
Slave sink current ISYNCH,LO 0.7 1 mA VSYNCH = 2.9 V 9
Master output amplitude VS_OUT,HI 2 V ISOURCE = 4.5 mA 9
Open loop voltage gain GV 100 dB 8
Frequency adjust (adjustable switching frequency) FADJ 1000 kHz RFSW = 33 k 8
Soft-start duration TSS 2 ms FSW = 1 MHz, RFSW = 33 k 8
Error amplifier source current IO SOURCE 19 mA VFB = 0.5 V, VCOMP = 1 V 8
Error amplifier sink current IO SINK 30 mA VFB = 0.7 V, VCOMP = 0.75 V 8
Master output pulse width tS_OUT_PW 110 ns SYNCH floating 9
Thermal shutdown TSHDN 150 °C 9
Thermal shutdown hysteresis TSHDN 30 °C 9

CAD (KiCad official)

  • Symbol: A7985ATR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: a7985atr-etched.step / a7985atr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a7985atr.step / a7985atr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (43 pp, sha256 76615cae763f4a5c, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF