component

A780KN686M1HLAS035

Public Made by Adom

by adom

KEMET Hybrid Aluminum Electrolytic Capacitors, SMD,D8xL10mm. Polarised capacitor: pin 1 is + by the KiCad polarised-footprint convention, KiCad symbol/footprint/3D.

componentcapacitorsa780kn686m1hlas035factory-2.0.0extractor-text

Verified A780KN686M1HLAS035

by Ray · last 11 Nov 2026 · 1 record, 1 retired · files match
SymbolFootprint3D modelPins

Verification log 2 records

11 Nov 2026RaySupersedes the earlier record: that check missed polarity (the pins said "unpolarised"; this capacitor is polarised): component-page-verify now PASSESfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: A780KN686M1HLAS035 · CP_Elec_8x10 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: two-terminal part whose datasheet prints no pin numbers: pins 1 and 2 by library convention, no names to check
  • ✓distributor: lcsc C5933673, digikey 399-A780KN686M1HLAS035TR-ND, mouser 80-A780KN686M1HLAS35
  • ✓family: CP_Elec_8x10
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-6psp8ddp/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓viewers: viewers/footprint.html 28 kB, viewers/symbol.html 6 kB
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ a780kn686m1hlas035.kicad_sym✓ a780kn686m1hlas035.kicad_mod✓ a780kn686m1hlas035.step
7 Nov 2026RayPublished by the parts factory: tier lcsc, 2 pinssuperseded
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: A780KN686M1HLAS035 · CP_Elec_8x10 · 2 pins
  • ✓copper: 2 copper pads, none touching another net
  • ✓datasheet: unpolarised two-terminal part: pins 1 and 2 by library convention, no names to check
  • ✓distributor: lcsc C5933673, digikey 399-A780KN686M1HLAS035TR-ND, mouser 80-A780KN686M1HLAS35
  • ✓family: CP_Elec_8x10
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-w8pn_48t/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 2 pins = 2 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 2 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ a780kn686m1hlas035.kicad_sym✓ a780kn686m1hlas035.kicad_mod✓ a780kn686m1hlas035.step
Retired by Ray on 11 Nov 2026: Retired: this check called a polarised capacitor an unpolarised two-terminal part. Fixed in component-page-verify 0.5.13 (an unrecorded polarity now fails) and 0.5.14 (the datasheet row no longer says unpolarised).
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
a780kn686m1hlas035 / README.md
History Download
Ray Polarity: pin 1 = +, 2 = - (symbol, footprint and 3D agree); brief and README corrected a0c6ff2

A780KN686M1HLAS035

KEMET · Hybrid Aluminum Electrolytic Capacitors · CP_Elec_8x10

A780KN686M1HLAS035 from KEMET, in a CP_Elec_8x10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 + passive Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end).
2 - passive Negative terminal.

Key specifications

Parameter Value
Manufacturer KEMET
Package CP_Elec_8x10
Category Capacitors
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated capacitance C 68 µF 120 Hz, 20°C 7
Capacitance tolerance ΔC/C -20 20 % 120 Hz/20°C (M = ±20%) 4
Rated voltage VR 50 VDC 1H = 50 VDC 7
Surge voltage (rated voltage x 1.15) VS 57.5 VDC 1,000 cycles at 125°C, 30 s charge via Rc = 1 kΩ, 5 min 30 s discharge 7
ESR ESR 35 mΩ 100 kHz, 20°C 7
Dissipation factor DF 0.1 120 Hz, 20°C 7
Maximum ripple current IRAC 1400 mA Capacitor mounted on PCB, Lop 4,000 h (table footnote 1) 7
Leakage current IL 34 µA 2 minute, 20°C (I = 0.01CV) 7
Operating temperature T -55 125 °C 4
Expected DC operational life (maximum) LOp 131 kh Maximum permissible operating temperature, rated voltage applied 9
Capacitance change after endurance ΔC/C -20 20 % Endurance life test 125°C, 4,000 h, rated voltage and ripple; restored to 20°C 5
Dissipation factor after endurance DF 200 % of specified value Endurance life test 125°C, 4,000 h; restored to 20°C 5
ESR after endurance ESR 200 % of specified value Endurance life test 125°C, 4,000 h; restored to 20°C 5
Capacitance change after damp heat ΔC/C -20 20 % Rated voltage 2,500 h at 85°C, 85% RH; restored to 20°C 5
Dissipation factor after damp heat DF 200 % of specified value Rated voltage 2,500 h at 85°C, 85% RH; restored to 20°C 5
ESR after damp heat ESR 200 % of specified value Rated voltage 2,500 h at 85°C, 85% RH; restored to 20°C 5
Capacitance change after surge ΔC/C -20 20 % 1,000 cycles at 125°C, 30 s charge via Rc = 1 kΩ, 5 min 30 s discharge 5
Dissipation factor after surge DF 150 % of specified value 1,000 cycles at 125°C, 30 s charge via Rc = 1 kΩ, 5 min 30 s discharge 5
ESR after surge ESR 150 % of specified value 1,000 cycles at 125°C, 30 s charge via Rc = 1 kΩ, 5 min 30 s discharge 5
Capacitance change after resistance to soldering heat ΔC/C -10 10 % Solder temperature profile at capacitor top and terminal 5
Dissipation factor after resistance to soldering heat DF 150 % of specified value Solder temperature profile at capacitor top and terminal 5
ESR after resistance to soldering heat ESR 150 % of specified value Solder temperature profile at capacitor top and terminal 5

CAD (KiCad official)

  • Symbol: A780KN686M1HLAS035
  • Footprint: Capacitor_SMD:CP_Elec_8x10
  • 3D model: CP_Elec_8x10 (KiCad packages3D, STEP)
  • 3D model files: a780kn686m1hlas035-etched.step / a780kn686m1hlas035-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a780kn686m1hlas035.step / a780kn686m1hlas035.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: KEMET datasheet (19 pp, sha256 7cde316649c25dfc, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF