← Commit history

a6211gljtr-t: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·eb5075f7f9 · ·parent d9c015f
1 file changed +81−1
page.json+81−1
@@ -33,5 +33,85 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "A6211GLJTR-T",+    "manufacturer": "Allegro MicroSystems LLC",+    "package": "SOIC-8-EP",+    "pin_count": 9,+    "category": "LED Drivers",+    "parts": {+      "symbol": "a6211gljtr-t.kicad_sym",+      "footprint": "a6211gljtr-t.kicad_mod",+      "model_3d": "a6211gljtr-t-etched.glb",+      "model_3d_plain": "a6211gljtr-t.glb",+      "model_3d_step": "a6211gljtr-t-etched.step",+      "model_3d_step_plain": "a6211gljtr-t.step",+      "lbr": "a6211gljtr-t.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply voltage input terminal. Operating range 6 to 48 V (absolute max −0.3 to 50 V). Bypass locally to GND."+      },+      {+        "number": "2",+        "name": "TON",+        "type": "input",+        "description": "Regulator on-time setting resistor terminal. External resistor RON to VIN sets the buck switch on-time (and effective switching frequency)."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Logic input for Enable and PWM dimming. VIL = 0.4 V, VIH = 1.8 V (abs max −0.3 to VIN+0.3 V). Drive with 100 Hz to 2 kHz PWM for LED brightness control; low = low-power shutdown (~1 µA)."+      },+      {+        "number": "4",+        "name": "CS",+        "type": "input",+        "description": "Drive output current sense feedback. Connects to RSENSE between the LED cathode and GND; internal 0.2 V reference sets the average LED current (ILED = 0.2 V / RSENSE). Absolute max −0.3 to 7 V."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_out",+        "description": "Internal linear regulator output (~5.3 V typ). Decouple with CVCC to GND. Absolute max VCC-to-GND −0.3 to 7 V; intended for internal use, not for external loading."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground terminal. Tie to the exposed thermal PAD and to the power ground plane."+      },+      {+        "number": "7",+        "name": "BOOT",+        "type": "passive",+        "description": "DMOS gate-driver bootstrap terminal. External CBOOT capacitor between BOOT and SW provides the high-side gate drive supply. Absolute max −0.3 to VIN+8 V; UVLO ~2.9 V (BOOT-to-SW)."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "output",+        "description": "Switched output terminal (source of the integrated high-side N-channel DMOS). Connects to the buck inductor L1 and to the freewheeling diode D1 cathode. Absolute max −1.5 to VIN+0.3 V; RDS(on) ≈ 0.25 Ω, 3 A max output."+      },+      {+        "number": "PAD",+        "name": "PAD",+        "type": "power_in",+        "description": "Exposed pad on the underside of the package for enhanced thermal dissipation. Must be connected to GND (pin 6) and to a copper thermal pour. RθJP ≈ 2 °C/W.",+        "thermal_pad": true+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}