main
History Download
Ray Publish 0.1.3 54a1c52

A5366CLWTR-T

Allegro MicroSystems, LLC · Interface - Specialized · SOIC-16

A5366CLWTR-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1 passive A capacitor on this pin sets the photoamplifier high-gain (supervisory) mode, with Ae = 1 + (C1/10) where C1 is in pF and C1 should not exceed 0.1 μF.
2 C2 passive A capacitor on this pin sets the photoamplifier low-gain standby mode, with Ae = 1 + (C2/10) where C2 is in pF and C2 should not exceed 0.1 μF, and a series resistor must be installed with it.
3 DETECT input This is the photoamplifier input connected to the photodiode cathode, which is operated at zero bias and requires a shunt resistor in parallel with the photodiode.
4 STROBE power_out This output provides a strobed, regulated voltage of VDD - 5 V that serves as the minus-side reference for the photoamplifier circuitry.
5 VDD power_in This is the positive supply pin, which can range from 6 to 12 V with respect to VSS (absolute maximum supply 15 V referenced to VSS).
6 IRED output This output provides a pulsed base current for an external NPN transistor driving the IR emitter, whose beta should be greater than 100, and it is not active while the horn and visible LED outputs are active.
7 I/O bidirectional This pin interconnects multiple detectors, is driven high on local smoke, is sampled every fourth clock cycle (nominally 42 ms) as an input, and has an on-chip pull-down that must be left unconnected if unused.
8 HORN1 output This output drives the piezoelectric horn and is connected to the piezo metal support electrode.
9 HORN2 output This complementary output drives the piezoelectric horn and is connected to the ceramic electrode.
10 FEEDBACK input This input is connected to the piezo feedback electrode for horn starting, and must be connected to VSS if not used.
11 LED output This open-drain NMOS output directly drives a visible LED, and if no LED is used it should be replaced by a resistor (typically 500 to 1000 Ω) so that the battery loading stays about 10 mA.
12 OSC CAP passive A capacitor between this pin and VDD, together with a parallel resistor, forms the two-terminal oscillator and sets the internal clock low time (Tlow = 0.693 × ROSCCAP × COSCCAP), and this pin may also be driven by an external clock source.
13 TIMING RES passive A resistor between this pin and OSC CAP forms the two-terminal oscillator and sets the internal clock high time, which is also the IRED pulse width (Thigh = 0.693 × RTIMINGRES × COSCCAP).
14 VSS power_in This pin is connected to the negative supply potential, usually ground.
15 HUSH input This input has an internal pull-down and enables timer mode when above 1.5 V and disables it when below 0.5 V, and it sets the smoke comparator reference during timer mode.
16 TEST input This input has an internal pull-down and invokes push-to-test mode when driven above approximately VDD - 0.5 V, and a high-to-low transition starts timer mode, while pulling it below VSS invokes diagnostic/calibration mode.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 6 12 V VSS = 0 V; test pin 5 4
Supply Voltage Range (absolute) VDD -0.5 15 V Referenced to VSS 2
Input Current IIN 10 mA 2
Operating Ambient Temperature Range TA -25 75 ºC 2
Maximum Junction Temperature TJ(max) 150 ºC 2
Storage Temperature Range Tstg -55 125 ºC 2
Average Operating Supply Current in Standby IDD 9 μA Average in standby mode, configured per typical application; test pin 5; VDD = 12 V 4
Operating Supply Current, STROBE on, IRED off IDD 2 mA During STROBE on, IRED off, configured per typical application; test pin 5; VDD = 12 V 4
Operating Supply Current, STROBE on, IRED on IDD 3 mA During STROBE on, IRED on, configured per typical application; test pin 5; VDD = 12 V 4
Low-Level Input Voltage VIL 1.5 V Test pin 7; VDD = 9 V 4
Low-Level Input Voltage VIL 2.7 V Test pin 10; VDD = 9 V 4
Low-Level Input Voltage VIL 7 V Test pin 16; VDD = 9 V 4
Low-Level Input Voltage VIL 0.5 V Test pin 15; VDD = 9 V 4
High-Level Input Voltage VIH 3.2 V Test pin 7; VDD = 9 V 4
High-Level Input Voltage VIH 6.3 V Test pin 10; VDD = 9 V 4
High-Level Input Voltage VIH 8.5 V Test pin 16; VDD = 9 V 4
High-Level Input Voltage VIH 1.6 V Test pin 15; VDD = 9 V 4
Input Leakage High IIH 100 nA VIN = VDD, STROBE active, OSC CAP = VDD; pins 1, 2; VDD = 12 V 4
Input Leakage Low IIL -100 nA VIN = VST, STROBE active, OSC CAP = VDD; pins 1, 2, 3; VDD = 12 V 4
Input Leakage Low IIL -1 μA VIN = VSS; pins 15, 16; VDD = 12 V 4
Input Pull-Down Current IIN 0.25 10 μA VIN = VDD; pins 16, 15; VDD = 9 V 4
Input Pull-Down Current (no local smoke) IIN 20 80 μA No local smoke, VIN = VDD; pin 7; VDD = 9 V 4
Input Pull-Down Current (no local smoke, 17 V) IIN 140 μA No local smoke, VIN = 17 V; pin 7; VDD = 12 V 4
Low-Level Output Voltage VOL 0.6 V IO = 10 mA; pin 11; VDD = 6.5 V 4
Low-Level Output Voltage VOL 1 V IO = 16 mA; pins 8, 9; VDD = 6.5 V 4
High-Level Output Voltage VOH 5.5 V IO = -16 mA; pins 8, 9; VDD = 6.5 V 4
IRED Output Voltage, inactive VIRED 0.1 V Inactive, IO = 1 μA, TA = 25°C; pin 6; VDD = 12 V 4
IRED Output Voltage, active VIRED 2.85 3.1 3.35 V Active, IO = -6 mA, TA = 25°C; pin 6; VDD = 9 V 4
High-Level Output Current IOH -4 mA VDD = Alarm, I/O active, VO = VDD, 2 V; pin 7; VDD = 9 V 5
OFF Leakage Current High IOZ 1 μA VO = VDD; pins 11, 13; VDD = 12 V 5
OFF Leakage Current Low IOZ -1 μA VO = VSS; pins 11, 13; VDD = 12 V 5
Low-Battery Alarm Threshold VDD(th) 6.9 7.2 7.5 V Pin 5 5
Oscillator Period tosc 9.4 10.5 11.5 ms Test pin 12; VDD = 9 V 5
LED Pulse Period, no local or remote smoke tled1 39 48 s No local or remote smoke; pin 11; VDD = 9 V 5
LED Pulse Period, local smoke tled3 0.45 0.5 0.55 s Local smoke; pin 11; VDD = 9 V 5
LED Pulse Period, timer mode, no alarm tled7 9.67 10.75 11.83 s Timer mode, no alarm; pin 11; VDD = 9 V 5
LED Pulse Width tw(led) 9.5 11.5 ms Pin 11; VDD = 9 V 5
STROBE Pulse Period, no local or remote smoke tst1 9.6 11.9 s No local or remote smoke; pin 4; VDD = 9 V 5
STROBE Pulse Period, after 1 of 3 valid samples tst2 1.8 2 2.2 s After 1 of 3 valid samples; pin 4; VDD = 9 V 5
STROBE Pulse Period, after 2 of 3 valid samples / local alarm tst3 0.8 1 1.1 s After 2 of 3 valid samples and during local alarm; pin 4; VDD = 9 V 5
STROBE Pulse Period, remote smoke only tst4 7.2 8 8.9 s Remote smoke only; pin 4; VDD = 9 V 5
STROBE Pulse Period, chamber test or low battery test tst5 38.9 47.1 s Chamber test or low battery test, no local alarm; pin 4; VDD = 9 V 5
STROBE Pulse Width tw(st) 9.5 11.5 ms Pin 4; VDD = 9 V 5
IRED Pulse Period, no local or remote smoke tired1 9.6 11.9 s No local or remote smoke; pin 6; VDD = 9 V 6
IRED Pulse Period, after 1 of 3 valid samples tired2 1.8 2 2.2 s After 1 of 3 valid samples; pin 6; VDD = 9 V 6
IRED Pulse Period, after 2 of 3 valid samples / local alarm tired3 0.8 1 1.1 s After 2 of 3 valid samples and during local alarm; pin 6; VDD = 9 V 6
IRED Pulse Period, remote smoke only tired4 7.2 8 8.9 s Remote smoke only; pin 6; VDD = 9 V 6
IRED Pulse Period, chamber test, no local alarm tired5 38.9 47.1 s Chamber test, no local alarm; pin 6; VDD = 9 V 6
IRED Pulse Width tw(ired) 94 116 μs Pin 6; VDD = 9 V 6
IRED Rise Time tr(ired) 30 μs 10% to 90%; pin 6 6
IRED Fall Time tf(ired) 200 μs 90% to 10%; pin 6 6
I/O Charge Dump Duration tdump 0.9 1 1.1 s End of local alarm or test; pin 7; VDD = 9 V 6
Horn Warning Pulse Period thorn 38.9 47.1 s Low battery or degraded chamber sensitivity; pins 8, 9; VDD = 9 V 6
Horn Warning Pulse Width tw(horn) 9.5 11.5 ms Low battery or degraded chamber sensitivity; pins 8, 9; VDD = 9 V 6
Horn On-Time ton(horn) 450 500 550 ms Local or remote alarm; pins 8, 9; VDD = 9 V 6
Horn Off-Time toff1(horn) 450 500 550 ms Local or remote alarm (see Timing Diagrams section); pins 8, 9; VDD = 9 V 6
Horn Off-Time toff2(horn) 1350 1500 1650 ms Local or remote alarm (see Timing Diagrams section); pins 8, 9; VDD = 9 V 6
Package Thermal Resistance, junction to ambient RθJA 48 ºC/W Package LW, on 4-layer PCB based on JEDEC standard 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin (suffix A), and for surface mount, a 16-pin SOICW (suffix LW). The lead (Pb) free versions (suffix -T) have 100% matte￾tin leadframe plating. The devices are rated for continuous 1

CAD (KiCad official)

  • Symbol: A5366CLWTR-T
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: a5366clwtr-t-etched.step / a5366clwtr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a5366clwtr-t.step / a5366clwtr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (13 pp, sha256 a14bc986d595aa2d, retrieved 2026-11-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF