A4982SETTR-T

{
  "slug": "a4982settr-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Allegro MicroSystems, LLC Motor Driver ICs, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "a4982settr-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "a4982settr-t.kicad_sym",
    "a4982settr-t.kicad_mod",
    "a4982settr-t.glb",
    "a4982settr-t.step",
    "a4982settr-t.lbr",
    "docs/hero.png",
    "docs/a4982settr-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "a4982settr-t-hero.glb",
    "a4982settr-t-hero.overlay.json",
    "a4982settr-t-etched.glb"
  ],
  "component": {
    "mpn": "A4982SETTR-T",
    "manufacturer": "Allegro MicroSystems, LLC",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Power Supply Chip",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f3928777ce588c3234b72fd95808dc9d.pdf",
    "parts": {
      "symbol": "a4982settr-t.kicad_sym",
      "footprint": "a4982settr-t.kicad_mod",
      "model_3d": "a4982settr-t-hero.glb",
      "model_3d_plain": "a4982settr-t-etched.glb",
      "model_3d_step": "a4982settr-t-etched.step",
      "model_3d_step_plain": "a4982settr-t.step",
      "lbr": "a4982settr-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653549",
      "digikey": "620-1340-2-ND",
      "mouser": "250-A4982SETTR-T"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T23:53:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "620-1340-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "250-A4982SETTR-T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT2B",
        "type": "output",
        "description": "DMOS full-bridge 2 output B driving the phase-2 motor winding; motor outputs are rated -2.0 to 37 V with output current limited to ±2 A."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "3",
        "name": "VBB2",
        "type": "power_in",
        "description": "Load supply for full-bridge 2, operating range 8 to 35 V (35 V absolute maximum)."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "5",
        "name": "ENABLE",
        "type": "input",
        "description": "Active-low logic input; logic high disables all FET outputs, while logic low lets the internal control enable the outputs as required."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be tied externally to the exposed-pad ground plane under the device."
      },
      {
        "number": "7",
        "name": "CP1",
        "type": "passive",
        "description": "Charge pump capacitor terminal; a 0.1 µF ceramic capacitor is connected between CP1 and CP2."
      },
      {
        "number": "8",
        "name": "CP2",
        "type": "passive",
        "description": "Charge pump capacitor terminal; a 0.1 µF ceramic capacitor is connected between CP1 and CP2."
      },
      {
        "number": "9",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge pump reservoir terminal for high-side FET gate supply; a 0.1 µF ceramic capacitor is required between VCP and VBB."
      },
      {
        "number": "10",
        "name": "VREG",
        "type": "power_out",
        "description": "Internally generated regulator output (nominal 7 V) for the sink-side FET gates; decouple with a 0.22 µF ceramic capacitor to ground."
      },
      {
        "number": "11",
        "name": "MS1",
        "type": "input",
        "description": "Microstep select logic input (with internal 100 kΩ pull-down) that sets step resolution together with MS2."
      },
      {
        "number": "12",
        "name": "MS2",
        "type": "input",
        "description": "Microstep select logic input (with internal 33.3 kΩ pull-down) that sets step resolution together with MS1."
      },
      {
        "number": "13",
        "name": "RESET",
        "type": "input",
        "description": "Active-low logic input; low sets the translator to the Home state and turns off all FET outputs, and STEP inputs are ignored until it returns high."
      },
      {
        "number": "14",
        "name": "ROSC",
        "type": "input",
        "description": "Fixed off-time timing pin: tie to VDD or GND for a 30 µs off-time, or tie through a resistor to ground where tOFF ≈ ROSC/825 µs."
      },
      {
        "number": "15",
        "name": "SLEEP",
        "type": "input",
        "description": "Active-low logic input; logic low places the device in Sleep mode (<10 µA) disabling the output FETs, current regulator and charge pump, and a 1 ms delay is required after leaving Sleep before a STEP command."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic supply, operating range 3.0 to 5.5 V, with internal UVLO at about 2.8 V (rising)."
      },
      {
        "number": "17",
        "name": "STEP",
        "type": "input",
        "description": "Logic input; each low-to-high transition advances the motor one microstep, with minimum HIGH and LOW pulse widths of 1 µs."
      },
      {
        "number": "18",
        "name": "REF",
        "type": "input",
        "description": "Transconductance reference voltage input, 0 to 4 V, that sets the maximum trip current as ITripMAX = VREF/(8×RS)."
      },
      {
        "number": "19",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be tied externally to the exposed-pad ground plane under the device."
      },
      {
        "number": "20",
        "name": "DIR",
        "type": "input",
        "description": "Logic input setting the direction of motor rotation; changes take effect only on the next STEP rising edge."
      },
      {
        "number": "21",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "22",
        "name": "VBB1",
        "type": "power_in",
        "description": "Load supply for full-bridge 1, operating range 8 to 35 V (35 V absolute maximum)."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "24",
        "name": "OUT1B",
        "type": "output",
        "description": "DMOS full-bridge 1 output B driving the phase-1 motor winding; motor outputs are rated -2.0 to 37 V with output current limited to ±2 A."
      },
      {
        "number": "25",
        "name": "SENSE1",
        "type": "passive",
        "description": "Sense resistor terminal for bridge 1; the SENSE1 voltage must not exceed the 0.5 V maximum rating (VSENSE -0.5 to 0.5 V)."
      },
      {
        "number": "26",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "27",
        "name": "OUT1A",
        "type": "output",
        "description": "DMOS full-bridge 1 output A driving the phase-1 motor winding; motor outputs are rated -2.0 to 37 V with output current limited to ±2 A."
      },
      {
        "number": "28",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "29",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "30",
        "name": "OUT2A",
        "type": "output",
        "description": "DMOS full-bridge 2 output A driving the phase-2 motor winding; motor outputs are rated -2.0 to 37 V with output current limited to ±2 A."
      },
      {
        "number": "31",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the ET package adds this pin between critical output, sense and supply pins for no-smoke-no-fire compliance."
      },
      {
        "number": "32",
        "name": "SENSE2",
        "type": "passive",
        "description": "Sense resistor terminal for bridge 2; the SENSE2 voltage must not exceed the 0.5 V maximum rating (VSENSE -0.5 to 0.5 V)."
      },
      {
        "number": "33",
        "name": "PAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad is not a numbered terminal in the ET terminal list (it is listed only as 'PA; Overbars on ENABLE, RESET and SLEEP were lost in text extraction. They are shown as active-low here ; Pin types for VCP and VREG (power_out), CP1 and CP2 and SENSE1/SENSE2 (passive) are my classificatio",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 20,
        "cost_usd": 0.1018,
        "at": "2026-10-30T23:53:07"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f3928777ce588c3234b72fd95808dc9d.pdf",
        "pages": 20,
        "sha256": "7c370c2d4c680549",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "a4982settr-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "a4982settr-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ad31898ef7f15776a89c42de8350afac31a7d94766ff12df446c545a08b2e56b",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "ET",
      "source_page": 18,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 5.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "a4982settr-t.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}