Generated by kicad-footprint-generator · KiCad file format 20260206
A4975SLBTR-T
Allegro MicroSystems, LLC · Motor Driver ICs · SOIC-16-300mil
A4975SLBTR-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PFD | input | Analog input that sets the current-decay mode: VPFD ≥ 3.5 V selects slow decay, 1.1 V to 3.1 V selects mixed decay, and ≤ 0.8 V selects fast decay. |
| 2 | REF (VREF) | input | Reference voltage input, operating range 0.5 V to 2.5 V, which together with RS and the D0-D2 inputs sets the peak output current. |
| 3 | RC | passive | Parallel combination of external resistor RT and capacitor CT sets the PWM fixed off-time and also the comparator blanking time; the datasheet's range is CT = 470 pF to 1500 pF and RT = 12 kΩ to 100 kΩ. |
| 4 | GROUND | power_in | Return for the logic supply (VCC) and load supply (VBB) and the reference for all voltage measurements; this internally fused pin is at ground potential. |
| 5 | GROUND | power_in | Return for the logic supply (VCC) and load supply (VBB) and the reference for all voltage measurements; this internally fused pin is at ground potential. |
| 6 | LOGIC SUPPLY (VCC) | power_in | Logic supply voltage, operating range 4.5 V to 5.5 V, typically 5 V. |
| 7 | PHASE | input | Controls the direction of current flow in the load, with an internally generated dead time of approximately 500 ns to prevent crossover current when PHASE switches. |
| 8 | D2 (DATA2) | input | Most significant of the three DAC control bits; logic high requires VCC × 0.55 minimum and logic low requires VCC × 0.27 maximum, and D0-D2 all low disables all outputs. |
| 9 | D1 (DATA1) | input | Middle control bit of the three-bit nonlinear DAC that sets the output current ratio; logic levels are VCC × 0.55 minimum for high and VCC × 0.27 maximum for low. |
| 10 | OUTA | output | One of two full-bridge output load connections, rated for continuous output current of ±1.5 A and an output voltage rating of 50 V. |
| 11 | SENSE | passive | Connection to the sink-transistor emitters; the current-sense resistor RS is connected between this pin and ground. |
| 12 | GROUND | power_in | Return for the logic supply (VCC) and load supply (VBB) and the reference for all voltage measurements; this internally fused pin is at ground potential. |
| 13 | GROUND | power_in | Return for the logic supply (VCC) and load supply (VBB) and the reference for all voltage measurements; this internally fused pin is at ground potential. |
| 14 | D0 (DATA0) | input | Least significant of the three DAC control bits; logic high requires VCC × 0.55 minimum and logic low requires VCC × 0.27 maximum. |
| 15 | OUTB | output | One of two full-bridge output load connections, rated for continuous output current of ±1.5 A and an output voltage rating of 50 V. |
| 16 | LOAD SUPPLY (VBB) | power_in | Supply voltage for the motor load, operating range 5 V to 50 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Power Management ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Load Supply Voltage Range | VBB | 5 | 50 | V | Operating | 3 | |
| Output Leakage Current | ICEX | 50 | μA | VOUT = VBB | 3 | ||
| Output Leakage Current | ICEX | -50 | μA | VOUT = 0 V | 3 | ||
| Output Resistance | RDS | 1 | 1.4 | Ω | Total Sink + Source, IOUT = 1.5 A, VBB > 8 V, TJ = 25°C | 3 | |
| Motor Supply Current (No Load) | IBB(ON) | 500 | 700 | μA | D0 = D1 = D2 = VIN(1) | 3 | |
| Motor Supply Current (No Load) | IBB(OFF) | 250 | 500 | μA | D0 = D1 = D2 = VIN(0) | 3 | |
| Logic Supply Voltage Range | VCC | 4.5 | 5 | 5.5 | V | Operating | 3 |
| Reference Voltage Range | VREF | 0.5 | 2.5 | V | Operating | 3 | |
| UVLO Enable Threshold | 3.35 | 3.7 | 4.05 | V | VCC = 0 → 5 V | 3 | |
| UVLO Hysteresis | 0.3 | 0.45 | 0.6 | V | 3 | ||
| Logic Input Current | IIN(1) | 0 | -10 | μA | VIN = VCC = 5 V | 3 | |
| Logic Input Current | IIN(0) | -106 | -200 | μA | VIN = 0 V, VCC = 5 V | 3 | |
| Mixed-Decay Comparator Trip Points | VPFD | 3.5 | V | Slow Current-Decay Mode | 3 | ||
| Mixed-Decay Comparator Trip Points | VPFD | 1.1 | 3.1 | V | Mixed Current-Decay Mode | 3 | |
| Mixed-Decay Comparator Trip Points | VPFD | 0.8 | V | Fast Current-Decay Mode | 3 | ||
| Mixed-Decay Comparator Input Offset Voltage | VIO(PFD) | -50 | 0 | 50 | mV | 3 | |
| Mixed-Decay Comparator Hysteresis | ΔVIO(PFD) | 5 | 25 | 55 | mV | 3 | |
| Reference Input Current | IREF | -5 | 5 | μA | VREF = 0.5 to 2.5 V | 3 | |
| Digital-to-Analog Converter Accuracy | -3 | 3 | % | 1.0 V < VREF ≤ 2.5 V | 3 | ||
| Digital-to-Analog Converter Accuracy | -4 | 4 | % | 0.5 V ≤ VREF ≤ 1.0 V | 3 | ||
| Current-Sense Comparator Input Offset Voltage | VIO(S) | -5 | 5 | mV | VREF = 0 V | 4 | |
| PWM RC Fixed Off-time | tOFFRC | 18.2 | 20.2 | 22.3 | μs | CT = 470 pF, RT = 43 kΩ | 4 |
| PWM Minimum On Time | tON(min) | 0.8 | 1.6 | 2.2 | μs | VCC = 5.0 V, RT ≥ 43 kΩ, CT = 470 pF, IOUT = 100 mA | 4 |
| Load Supply Voltage | VBB | 50 | V | 2 | |||
| Logic Supply Voltage | VCC | 6 | V | 2 | |||
| Logic/Reference Input Voltage Range | VIN | -0.3 | 6 | V | 2 | ||
| Sense Voltage | VS | 0.5 | V | 2 | |||
| Output Current, Continuous | IOUT | -1.5 | 1.5 | A | Limited by duty cycle, ambient temperature and heat sinking; do not exceed TJ 150 °C | 2 | |
| Operating Ambient Temperature, Range S | TA | -20 | 85 | ºC | 2 | ||
| Maximum Junction Temperature | TJ(max) | 150 | ºC | 2 | |||
| Storage Temperature | Tstg | -55 | 150 | ºC | 2 | ||
| Package Thermal Resistance, Junction to Ambient | RθJA | 67 | ºC/W | LB Package, 2-layer PCB, 0.3 in.2 2-oz. exposed copper each side | 2 | ||
| Package Thermal Resistance, Junction to Tab | RθJT | 6 | ºC/W | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | dual-in-line plastic package with copper heat-sink tabs (suffix ‘B’), | 2 | |
| contacts | copper | The A4975 is supplied in a choice of two power packages; a 16-pin dual-in-line plastic package with copper heat-sink tabs (suffix ‘B’), | 2 |
CAD (KiCad official)
- Symbol:
A4975SLBTR-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
a4975slbtr-t-etched.step/a4975slbtr-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);a4975slbtr-t.step/a4975slbtr-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (13 pp, sha256
a79209451199733e, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).