← Commit history

Initial commit: component/a4964kjptr-t

Ray ·9028f9b74b ·
2 files changed +353
README.mdadded+68
@@ -0,0 +1,68 @@+# A4964KJPTR-T++**Allegro MicroSystems LLC** · Brushless DC (BLDC) Motor Driver · QFP-32(7x7)++A4964KJPTR-T from Allegro MicroSystems LLC, in a QFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DIAG | output | Programmable diagnostic output; can be shorted to ground or VBAT without damage. |+| 2 | VLR | power_out | VLR logic regulator output, selectable to 3.3 or 5 V; requires ≥1 µF ceramic decoupling capacitor (ESR ≤250 mΩ) to GND for stability. |+| 3 | STRn | input | Serial strobe and chip select logic input with pull-up; when high, disables serial clock and data activity and forces SDO to high impedance. |+| 4 | SCK | input | Serial clock logic input with pull-down; data is latched from SDI on rising edge; must be held high when STRn changes. |+| 5 | SDI | input | Serial data logic input with pull-down for MSB-first 16-bit serial word transfer. |+| 6 | WDOG | input | Microcontroller watchdog logic input with pull-down; window watchdog with programmable minimum and maximum clock period. |+| 7 | SDO | output | Serial data logic output (high impedance when STRn is high); outputs diagnostic register bit 15 and fault flag. |+| 8 | MRSTn | output | Microcontroller reset logic output; held low until supplies are available and for 10 ms at power-up; resets microcontroller on watchdog failure. |+| 9 | CSM | input | Sense amplifier negative input; connect directly to one end of external current sense resistor using separate PCB trace. |+| 10 | CSP | input | Sense amplifier positive input; connect directly to other end of external current sense resistor using separate PCB trace. |+| 11 | LRX | output | LIN receive data logic output or PWM receive output; logic level referenced to VLR. |+| 12 | LTX | input | LIN transmit data logic input or fault diagnostic transmit input; logic level referenced to VLR. |+| 13 | LIN | bidirectional | LIN bus connection compliant with LIN 2.2A; can be used as PWM input in stand-alone mode or passed through to LRX output. |+| 14 | GND | power_in | Analog reference, digital and power ground; connect to supply ground with separate low-impedance traces for analog and digital returns. |+| 15 | GLC | output | Phase C low-side FET gate drive output; drives external N-channel MOSFET gate with regulated voltage. |+| 16 | GHC | output | Phase C high-side FET gate drive output; floats with respect to SC; drives external N-channel MOSFET gate. |+| 17 | SC | output | Phase C motor phase connection; carries motor phase current and serves as reference for high-side gate driver; also senses back-EMF. |+| 18 | CC | passive | Phase C bootstrap capacitor connection; positive supply for phase C high-side gate driver; connect external bootstrap capacitor between CC and SC. |+| 19 | GLB | output | Phase B low-side FET gate drive output; drives external N-channel MOSFET gate with regulated voltage. |+| 20 | GHB | output | Phase B high-side FET gate drive output; floats with respect to SB; drives external N-channel MOSFET gate. |+| 21 | SB | output | Phase B motor phase connection; carries motor phase current and serves as reference for high-side gate driver; also senses back-EMF. |+| 22 | CB | passive | Phase B bootstrap capacitor connection; positive supply for phase B high-side gate driver; connect external bootstrap capacitor between CB and SB. |+| 23 | GLA | output | Phase A low-side FET gate drive output; drives external N-channel MOSFET gate with regulated voltage. |+| 24 | GHA | output | Phase A high-side FET gate drive output; floats with respect to SA; drives external N-channel MOSFET gate. |+| 25 | SA | output | Phase A motor phase connection; carries motor phase current and serves as reference for high-side gate driver; also senses back-EMF. |+| 26 | CA | passive | Phase A bootstrap capacitor connection; positive supply for phase A high-side gate driver; connect external bootstrap capacitor between CA and SA. |+| 27 | VREG | power_out | Gate drive supply capacitor terminal; nominally 11 V regulated output; powers low-side gate drivers and charges bootstrap capacitors; requires large storage capacitor. |+| 28 | CP2 | passive | Pump capacitor high terminal for charge pump; connect 470 nF ceramic capacitor between CP1 and CP2. |+| 29 | CP1 | passive | Pump capacitor low terminal for charge pump; connect 470 nF ceramic capacitor between CP1 and CP2. |+| 30 | VBB | power_in | Main power supply input for internal regulators and charge pump; 5.5 to 50 V operating range; requires reverse polarity protection and 100 nF decoupling capacitor. |+| 31 | IG | input | Ignition switch input with internal pull-down; enables logic regulator and microcontroller power when driven high; tie to GND when unused. |+| 32 | VBRG | input | High-side drain voltage sense input; measures voltage at drain of high-side MOSFETs in bridge for accurate diagnostics and overvoltage detection. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Allegro MicroSystems LLC |+| Package | QFP-32(7x7) |+| Category | Motor Driver ICs |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `A4964KJPTR-T`+- Footprint: `Package_QFP:TQFP-32_7x7mm_P0.8mm`+- 3D model: QFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `a4964kjptr-t-etched.step` / `a4964kjptr-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `a4964kjptr-t.step` / `a4964kjptr-t.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Allegro MicroSystems LLC datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927077496606720) (92 pp, sha256 `53da98bac1dbb4e0`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/a4964kjptr-t-datasheet.pdf)
page.jsonadded+285
@@ -0,0 +1,285 @@+{+  "slug": "a4964kjptr-t",+  "version": "0.1.0",+  "type": "component",+  "description": "Allegro MicroSystems LLC Brushless DC (BLDC) Motor Driver, QFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "a4964kjptr-t",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "a4964kjptr-t.kicad_sym",+    "a4964kjptr-t.kicad_mod",+    "a4964kjptr-t.glb",+    "a4964kjptr-t.step",+    "a4964kjptr-t.lbr",+    "docs/hero.png",+    "docs/a4964kjptr-t-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "A4964KJPTR-T",+    "manufacturer": "Allegro MicroSystems LLC",+    "package": "QFP-32(7x7)",+    "pin_count": 32,+    "category": "Motor Driver ICs",+    "subcategory": "Brushless DC (BLDC) Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927077496606720",+    "parts": {+      "symbol": "a4964kjptr-t.kicad_sym",+      "footprint": "a4964kjptr-t.kicad_mod",+      "model_3d": "a4964kjptr-t-etched.glb",+      "model_3d_plain": "a4964kjptr-t.glb",+      "model_3d_step": "a4964kjptr-t-etched.step",+      "model_3d_step_plain": "a4964kjptr-t.step",+      "lbr": "a4964kjptr-t.lbr"+    },+    "distributor_links": {+      "lcsc": "C2150453"+    },+    "pins": [+      {+        "number": "1",+        "name": "DIAG",+        "type": "output",+        "description": "Programmable diagnostic output; can be shorted to ground or VBAT without damage."+      },+      {+        "number": "2",+        "name": "VLR",+        "type": "power_out",+        "description": "VLR logic regulator output, selectable to 3.3 or 5 V; requires ≥1 µF ceramic decoupling capacitor (ESR ≤250 mΩ) to GND for stability."+      },+      {+        "number": "3",+        "name": "STRn",+        "type": "input",+        "description": "Serial strobe and chip select logic input with pull-up; when high, disables serial clock and data activity and forces SDO to high impedance."+      },+      {+        "number": "4",+        "name": "SCK",+        "type": "input",+        "description": "Serial clock logic input with pull-down; data is latched from SDI on rising edge; must be held high when STRn changes."+      },+      {+        "number": "5",+        "name": "SDI",+        "type": "input",+        "description": "Serial data logic input with pull-down for MSB-first 16-bit serial word transfer."+      },+      {+        "number": "6",+        "name": "WDOG",+        "type": "input",+        "description": "Microcontroller watchdog logic input with pull-down; window watchdog with programmable minimum and maximum clock period."+      },+      {+        "number": "7",+        "name": "SDO",+        "type": "output",+        "description": "Serial data logic output (high impedance when STRn is high); outputs diagnostic register bit 15 and fault flag."+      },+      {+        "number": "8",+        "name": "MRSTn",+        "type": "output",+        "description": "Microcontroller reset logic output; held low until supplies are available and for 10 ms at power-up; resets microcontroller on watchdog failure."+      },+      {+        "number": "9",+        "name": "CSM",+        "type": "input",+        "description": "Sense amplifier negative input; connect directly to one end of external current sense resistor using separate PCB trace."+      },+      {+        "number": "10",+        "name": "CSP",+        "type": "input",+        "description": "Sense amplifier positive input; connect directly to other end of external current sense resistor using separate PCB trace."+      },+      {+        "number": "11",+        "name": "LRX",+        "type": "output",+        "description": "LIN receive data logic output or PWM receive output; logic level referenced to VLR."+      },+      {+        "number": "12",+        "name": "LTX",+        "type": "input",+        "description": "LIN transmit data logic input or fault diagnostic transmit input; logic level referenced to VLR."+      },+      {+        "number": "13",+        "name": "LIN",+        "type": "bidirectional",+        "description": "LIN bus connection compliant with LIN 2.2A; can be used as PWM input in stand-alone mode or passed through to LRX output."+      },+      {+        "number": "14",+        "name": "GND",+        "type": "power_in",+        "description": "Analog reference, digital and power ground; connect to supply ground with separate low-impedance traces for analog and digital returns."+      },+      {+        "number": "15",+        "name": "GLC",+        "type": "output",+        "description": "Phase C low-side FET gate drive output; drives external N-channel MOSFET gate with regulated voltage."+      },+      {+        "number": "16",+        "name": "GHC",+        "type": "output",+        "description": "Phase C high-side FET gate drive output; floats with respect to SC; drives external N-channel MOSFET gate."+      },+      {+        "number": "17",+        "name": "SC",+        "type": "output",+        "description": "Phase C motor phase connection; carries motor phase current and serves as reference for high-side gate driver; also senses back-EMF."+      },+      {+        "number": "18",+        "name": "CC",+        "type": "passive",+        "description": "Phase C bootstrap capacitor connection; positive supply for phase C high-side gate driver; connect external bootstrap capacitor between CC and SC."+      },+      {+        "number": "19",+        "name": "GLB",+        "type": "output",+        "description": "Phase B low-side FET gate drive output; drives external N-channel MOSFET gate with regulated voltage."+      },+      {+        "number": "20",+        "name": "GHB",+        "type": "output",+        "description": "Phase B high-side FET gate drive output; floats with respect to SB; drives external N-channel MOSFET gate."+      },+      {+        "number": "21",+        "name": "SB",+        "type": "output",+        "description": "Phase B motor phase connection; carries motor phase current and serves as reference for high-side gate driver; also senses back-EMF."+      },+      {+        "number": "22",+        "name": "CB",+        "type": "passive",+        "description": "Phase B bootstrap capacitor connection; positive supply for phase B high-side gate driver; connect external bootstrap capacitor between CB and SB."+      },+      {+        "number": "23",+        "name": "GLA",+        "type": "output",+        "description": "Phase A low-side FET gate drive output; drives external N-channel MOSFET gate with regulated voltage."+      },+      {+        "number": "24",+        "name": "GHA",+        "type": "output",+        "description": "Phase A high-side FET gate drive output; floats with respect to SA; drives external N-channel MOSFET gate."+      },+      {+        "number": "25",+        "name": "SA",+        "type": "output",+        "description": "Phase A motor phase connection; carries motor phase current and serves as reference for high-side gate driver; also senses back-EMF."+      },+      {+        "number": "26",+        "name": "CA",+        "type": "passive",+        "description": "Phase A bootstrap capacitor connection; positive supply for phase A high-side gate driver; connect external bootstrap capacitor between CA and SA."+      },+      {+        "number": "27",+        "name": "VREG",+        "type": "power_out",+        "description": "Gate drive supply capacitor terminal; nominally 11 V regulated output; powers low-side gate drivers and charges bootstrap capacitors; requires large storage capacitor."+      },+      {+        "number": "28",+        "name": "CP2",+        "type": "passive",+        "description": "Pump capacitor high terminal for charge pump; connect 470 nF ceramic capacitor between CP1 and CP2."+      },+      {+        "number": "29",+        "name": "CP1",+        "type": "passive",+        "description": "Pump capacitor low terminal for charge pump; connect 470 nF ceramic capacitor between CP1 and CP2."+      },+      {+        "number": "30",+        "name": "VBB",+        "type": "power_in",+        "description": "Main power supply input for internal regulators and charge pump; 5.5 to 50 V operating range; requires reverse polarity protection and 100 nF decoupling capacitor."+      },+      {+        "number": "31",+        "name": "IG",+        "type": "input",+        "description": "Ignition switch input with internal pull-down; enables logic regulator and microcontroller power when driven high; tie to GND when unused."+      },+      {+        "number": "32",+        "name": "VBRG",+        "type": "input",+        "description": "High-side drain voltage sense input; measures voltage at drain of high-side MOSFETs in bridge for accurate diagnostics and overvoltage detection."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 8,+        "cost_usd": 0.2759,+        "at": "2026-09-22T03:59:17"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588927077496606720",+        "pages": 92,+        "sha256": "53da98bac1dbb4e0",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 32,+        "described": 32,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file