component
A3P030-1QNG48
Public Made by Adomby adom
Microsemi Programmable Logic Device (CPLDs/FPGAs), QFN-48(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441
{
"slug": "a3p030-1qng48",
"version": "0.1.0",
"type": "component",
"description": "Microsemi Programmable Logic Device (CPLDs/FPGAs), QFN-48(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"a3p030-1qng48",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"a3p030-1qng48.kicad_sym",
"a3p030-1qng48.kicad_mod",
"a3p030-1qng48.glb",
"a3p030-1qng48.step",
"a3p030-1qng48.lbr",
"docs/hero.png",
"docs/a3p030-1qng48-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"a3p030-1qng48-hero.glb",
"a3p030-1qng48-hero.overlay.json",
"a3p030-1qng48-etched.glb"
],
"component": {
"mpn": "A3P030-1QNG48",
"manufacturer": "Microsemi",
"package": "QFN-48(6x6)",
"pin_count": 49,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Programmable Logic Device (CPLDs/FPGAs)",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/cb367b8827cf3fa2fcab1230f5c32fb6.pdf",
"parts": {
"symbol": "a3p030-1qng48.kicad_sym",
"footprint": "a3p030-1qng48.kicad_mod",
"model_3d": "a3p030-1qng48-hero.glb",
"model_3d_plain": "a3p030-1qng48-etched.glb",
"model_3d_step": "a3p030-1qng48-etched.step",
"model_3d_step_plain": "a3p030-1qng48.step",
"lbr": "a3p030-1qng48.lbr"
},
"distributor_links": {
"lcsc": "C2614853",
"digikey": "A3P030-1QNG48-ND",
"mouser": "494-A3P030-1QNG48"
},
"distributor_check": {
"checked_at": "2026-10-31T12:22:47Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "A3P030-1QNG48-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "494-A3P030-1QNG48",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "IO82RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO82RSB1)."
},
{
"number": "2",
"name": "GEC0/IO73RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 that doubles as global GEC0 with access to the global network."
},
{
"number": "3",
"name": "GEA0/IO72RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 that doubles as global GEA0 with access to the global network."
},
{
"number": "4",
"name": "GEB0/IO71RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 that doubles as global GEB0 with access to the global network."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground supply voltage to the core, I/O outputs, and I/O logic."
},
{
"number": "6",
"name": "VCCIB1",
"type": "power_in",
"description": "Supply voltage to bank 1 I/O output buffers and I/O logic; 1.5 V, 1.8 V, 2.5 V, or 3.3 V nominal."
},
{
"number": "7",
"name": "IO68RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO68RSB1)."
},
{
"number": "8",
"name": "IO67RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO67RSB1)."
},
{
"number": "9",
"name": "IO66RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO66RSB1)."
},
{
"number": "10",
"name": "IO65RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO65RSB1)."
},
{
"number": "11",
"name": "IO64RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO64RSB1)."
},
{
"number": "12",
"name": "IO62RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO62RSB1)."
},
{
"number": "13",
"name": "IO61RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO61RSB1)."
},
{
"number": "14",
"name": "IO60RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO60RSB1)."
},
{
"number": "15",
"name": "IO57RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO57RSB1)."
},
{
"number": "16",
"name": "IO55RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO55RSB1)."
},
{
"number": "17",
"name": "IO53RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO53RSB1)."
},
{
"number": "18",
"name": "VCC",
"type": "power_in",
"description": "Core supply voltage, nominally 1.5 V; also required to power the JTAG state machine."
},
{
"number": "19",
"name": "VCCIB1",
"type": "power_in",
"description": "Supply voltage to bank 1 I/O output buffers and I/O logic; 1.5 V, 1.8 V, 2.5 V, or 3.3 V nominal."
},
{
"number": "20",
"name": "IO46RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO46RSB1)."
},
{
"number": "21",
"name": "IO42RSB1",
"type": "bidirectional",
"description": "User I/O in bank 1 (IO42RSB1)."
},
{
"number": "22",
"name": "TCK",
"type": "input",
"description": "JTAG test clock input for boundary scan, ISP, and UJTAG, with no internal pull resistor; tie to GND through 200 ohm to 1 kohm (500 ohm to 1 kohm at 1.5/1.8 V VJTAG) if JTAG is unused."
},
{
"number": "23",
"name": "TDI",
"type": "input",
"description": "JTAG test data serial input with an internal weak pull-up resistor."
},
{
"number": "24",
"name": "TMS",
"type": "input",
"description": "JTAG test mode select controlling the boundary scan pins, with an internal weak pull-up resistor."
},
{
"number": "25",
"name": "VPUMP",
"type": "power_in",
"description": "Programming supply, 3.3 V nominal for programming; may float or be tied to any voltage up to the VPUMP maximum in normal operation, and tying it to ground shuts off the charge pump."
},
{
"number": "26",
"name": "TDO",
"type": "output",
"description": "JTAG test data serial output for boundary scan, ISP, and UJTAG."
},
{
"number": "27",
"name": "TRST",
"type": "input",
"description": "Active-low asynchronous JTAG boundary scan reset input with an internal weak pull-up resistor; tie to GND via resistor if JTAG is unused."
},
{
"number": "28",
"name": "VJTAG",
"type": "power_in",
"description": "JTAG supply voltage for the dedicated JTAG bank, 1.5 V to 3.3 V nominal; VCC must also be powered for JTAG operation."
},
{
"number": "29",
"name": "IO38RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO38RSB0)."
},
{
"number": "30",
"name": "GDB0/IO34RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 that doubles as global GDB0 with access to the global network."
},
{
"number": "31",
"name": "GDA0/IO33RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 that doubles as global GDA0 with access to the global network."
},
{
"number": "32",
"name": "GDC0/IO32RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 that doubles as global GDC0 with access to the global network."
},
{
"number": "33",
"name": "VCCIB0",
"type": "power_in",
"description": "Supply voltage to bank 0 I/O output buffers and I/O logic; 1.5 V, 1.8 V, 2.5 V, or 3.3 V nominal."
},
{
"number": "34",
"name": "GND",
"type": "power_in",
"description": "Ground supply voltage to the core, I/O outputs, and I/O logic."
},
{
"number": "35",
"name": "VCC",
"type": "power_in",
"description": "Core supply voltage, nominally 1.5 V; also required to power the JTAG state machine."
},
{
"number": "36",
"name": "IO25RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO25RSB0)."
},
{
"number": "37",
"name": "IO24RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO24RSB0)."
},
{
"number": "38",
"name": "IO22RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO22RSB0)."
},
{
"number": "39",
"name": "IO20RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO20RSB0)."
},
{
"number": "40",
"name": "IO18RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO18RSB0)."
},
{
"number": "41",
"name": "IO16RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO16RSB0)."
},
{
"number": "42",
"name": "IO14RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO14RSB0)."
},
{
"number": "43",
"name": "IO10RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO10RSB0)."
},
{
"number": "44",
"name": "IO08RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO08RSB0)."
},
{
"number": "45",
"name": "IO06RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO06RSB0)."
},
{
"number": "46",
"name": "IO04RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO04RSB0)."
},
{
"number": "47",
"name": "IO02RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO02RSB0)."
},
{
"number": "48",
"name": "IO00RSB0",
"type": "bidirectional",
"description": "User I/O in bank 0 (IO00RSB0)."
},
{
"number": "49",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet says the die attach paddle at the package center is tied to ground (GND). It has no pi; Datasheet package name is QN48, which is the QFN-48 (6x6) hint. The 6x6 body size is not stated in t"
],
"pages_sent": 103,
"cost_usd": 0.8408,
"at": "2026-10-31T12:22:11"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/cb367b8827cf3fa2fcab1230f5c32fb6.pdf",
"pages": 221,
"sha256": "2a08c1e8322ee15d",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 49,
"described": 49,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "a3p030-1qng48.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.02,
6.02,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "10c5b56a4220b19aecf9e9cf386953085f0cb86061d0e258eb22eef19b5cf4ce",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "a3p030-1qng48-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.02,
6.02,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "99971bf23b2c600d222939b69a2c7ccf95394d5befd82e94dcb45ff57db2330f",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}