main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers a3967slbtr-t: viewers rendered from the public page · Ray
a3967slbtr-t-etched.glb Publish 0.1.0 · Ray
a3967slbtr-t-etched.step a3967slbtr-t: factory component page (tier=lcsc) · Ray
a3967slbtr-t-hero.glb a3967slbtr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
a3967slbtr-t-hero.overlay.json Publish 0.1.0 · Ray
a3967slbtr-t.glb Publish 0.1.0 · Ray
a3967slbtr-t.kicad_mod Publish 0.1.0 · Ray
a3967slbtr-t.kicad_sym Publish 0.1.0 · Ray
a3967slbtr-t.lbr Publish 0.1.0 · Ray
a3967slbtr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 24 pins · Ray

A3967SLBTR-T

Allegro MicroSystems, LLC · Motor Driver ICs · SOIC-24-300mil

A3967SLBTR-T from Allegro MicroSystems, LLC, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Gm reference input that sets the full-scale current through ITRIPmax = VREF/8RS, with VREF operating from 1.0 V to VCC.
2 RC2 input Analog timing input for the fixed off-time of bridge 2, set by an external RT and CT to ground (toff = RT·CT).
3 SLEEP input Active-low logic input that minimizes power consumption; a logic high allows normal operation and startup in the home position.
4 OUT2B output H-bridge 2 output B, rated for ±750 mA continuous and 30 V.
5 VBB2 power_in Load supply for bridge 2, operating from 4.75 V to 30 V and decoupled with an electrolytic capacitor (>47 µF recommended) placed close to the device.
6 GND power_in Analog and power ground, internally bonded to the package power tab (fused pin).
7 GND power_in Analog and power ground, internally bonded to the package power tab (fused pin).
8 SENSE2 passive Sense resistor connection for bridge 2, which should have an independent short ground return to the star ground.
9 OUT2A output H-bridge 2 output A, rated for ±750 mA continuous and 30 V.
10 STEP input Logic input where a low-to-high transition advances the motor one microstep, requiring a minimum pulse width of 1.0 µs.
11 DIR input Logic input that sets the direction of motor rotation.
12 MS1 input Logic input that selects the microstep resolution together with MS2 (full, half, quarter, or eighth step).
13 MS2 input Logic input that selects the microstep resolution together with MS1 (full, half, quarter, or eighth step).
14 VCC power_in Logic supply voltage, operating from 3.0 V to 5.5 V.
15 ENABLE input Active-low input that enables all outputs; a logic high disables the outputs.
16 OUT1A output H-bridge 1 output A, rated for ±750 mA continuous and 30 V.
17 SENSE1 passive Sense resistor connection for bridge 1, which should have an independent short ground return to the star ground.
18 GND power_in Analog and power ground, internally bonded to the package power tab (fused pin).
19 GND power_in Analog and power ground, internally bonded to the package power tab (fused pin).
20 VBB1 power_in Load supply for bridge 1, operating from 4.75 V to 30 V and decoupled with an electrolytic capacitor (>47 µF recommended) placed close to the device.
21 OUT1B output H-bridge 1 output B, rated for ±750 mA continuous and 30 V.
22 RESET input Active-low logic input that sets the translator to the home state and turns off all outputs; STEP is ignored until RESET goes high.
23 RC1 input Analog timing input for the fixed off-time of bridge 1, set by an external RT and CT to ground (toff = RT·CT).
24 PFD input Mixed-decay setting input; above 0.6·VCC selects slow decay and below 0.21·VCC selects fast decay.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-24-300mil
Category Power Management ICs
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Load Supply Voltage VBB 30 V 2
Logic Supply Voltage VCC 7 V 2
Logic Input Voltage Range VIN -0.3 7 V tw > 30 ns 2
Logic Input Voltage Range VIN -1 7 V tw < 30 ns 2
Sense Voltage VSENSE 0.68 V 2
Operating Ambient Temperature TA -20 85 °C Range S 2
Maximum Junction Temperature TJ(max) 150 °C 2
Storage Temperature Tstg -55 150 °C 2
Package Thermal Resistance, Junction to Ambient RθJA 50 °C/W 2-layer PCB, 1.3 in.2 2-oz. exposed copper 2
Package Thermal Resistance, Junction to Ambient RθJA 35 °C/W 4-layer PCB, based on JEDEC standard 2
Load Supply Voltage Range VBB 4.75 30 V Operating 3
Load Supply Voltage Range VBB 0 30 V During sleep mode 3
Output Leakage Current ICEX 1 20 µA VOUT = VBB 3
Output Leakage Current ICEX -1 -20 µA VOUT = 0 V 3
Output Saturation Voltage VCE(sat) 1.9 2.1 V Source driver, IOUT = -750 mA 3
Output Saturation Voltage VCE(sat) 1.7 2 V Source driver, IOUT = -400 mA 3
Output Saturation Voltage VCE(sat) 0.65 1.3 V Sink driver, IOUT = 750 mA 3
Output Saturation Voltage VCE(sat) 0.21 0.5 V Sink driver, IOUT = 400 mA 3
Clamp Diode Forward Voltage VF 1.4 1.6 V IF = 750 mA 3
Clamp Diode Forward Voltage VF 1.1 1.4 V IF = 400 mA 3
Motor Supply Current IBB 5 mA Outputs enabled 3
Motor Supply Current IBB 200 µA RESET high 3
Motor Supply Current IBB 20 µA Sleep mode 3
Logic Supply Voltage Range VCC 3 5 5.5 V Operating 3
Logic Input Current IIN(1) -20 1 20 µA VIN = 0.7VCC 3
Maximum STEP Frequency fSTEP 500 kHz Printed with * : operation above the minimum is possible but not warranted 3
Blank Time tBLANK 700 950 1200 ns Rt = 56 kΩ, Ct = 680 pF 3
Fixed Off Time toff 30 38 46 µs Rt = 56 kΩ, Ct = 680 pF 3
Ref. Input Voltage Range VREF 1 V Operating; printed maximum is VCC 4
Reference Input Impedance ZREF 120 160 200 kΩ 4
Gain (Gm) Error EG -10 10 % VREF = 2 V, Phase Current = 38.37% 4
Gain (Gm) Error EG -5 5 % VREF = 2 V, Phase Current = 70.71% 4
UVLO Enable Threshold VUVLO 2.45 2.7 2.95 V Increasing VCC 4
UVLO Hysteresis ΔVUVLO 0.05 0.1 V 4
Logic Supply Current ICC 50 65 mA Outputs enabled 4
Logic Supply Current ICC 9 mA Outputs off 4
Logic Supply Current ICC 20 µA Sleep mode 4
Data Set-Up Time (Minimum Command Active Time Before Step Pulse) 200 ns TA = +25°C, VCC = 5 V 7
Data Hold Time (Minimum Command Active Time After Step Pulse) 200 ns TA = +25°C, VCC = 5 V 7
Minimum STEP Pulse Width 1 µs TA = +25°C, VCC = 5 V 7
Minimum STEP Low Time 1 µs TA = +25°C, VCC = 5 V 7
Maximum Wake-Up Time 1 ms TA = +25°C, VCC = 5 V 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin The A3967 is supplied in a 24-pin SOIC, which is lead (Pb) free with 100% matte tin leadframe plating. Four pins are 1

CAD (KiCad official)

  • Symbol: A3967SLBTR-T
  • Footprint: Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm
  • 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
  • 3D model files: a3967slbtr-t-etched.step / a3967slbtr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a3967slbtr-t.step / a3967slbtr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (15 pp, sha256 4bbc3b9839b3fa6c, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF