main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers a3966slbtr-t: viewers rendered from the public page · Ray
a3966slbtr-t-etched.glb a3966slbtr-t: factory component page (tier=lcsc) · Ray
a3966slbtr-t-etched.step a3966slbtr-t: factory component page (tier=lcsc) · Ray
a3966slbtr-t-hero.glb a3966slbtr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
a3966slbtr-t-hero.overlay.json a3966slbtr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
a3966slbtr-t.glb Publish 0.1.0 · Ray
a3966slbtr-t.kicad_mod Publish 0.1.0 · Ray
a3966slbtr-t.kicad_sym Publish 0.1.0 · Ray
a3966slbtr-t.lbr Publish 0.1.0 · Ray
a3966slbtr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

A3966SLBTR-T

Allegro MicroSystems, LLC · Gate Drive ICs · SOIC-16

A3966SLBTR-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT1A output Bridge 1 output A.
2 PHASE 1 input Bridge 1 phase (current direction) input.
3 ENABLE 1 input Bridge 1 enable input.
4 GROUND power_in Ground; fused internally to the die pad with pin 13 for heat dissipation ('Pins 4 and 13 fused internally').
5 SENSE1 passive Bridge 1 current-sense resistor connection.
6 OUT 1B output Bridge 1 output B.
7 LOAD SUPPLY power_in Load supply VBB (max 30 V).
8 REFERENCE input Current-limit reference voltage VREF.
9 RC passive Fixed off-time RC timing network.
10 LOGIC SUPPLY power_in Logic supply VCC (max 7.0 V).
11 OUT 2B output Bridge 2 output B.
12 SENSE 2 passive Bridge 2 current-sense resistor connection.
13 GROUND power_in Ground; fused internally to the die pad with pin 4.
14 ENABLE 2 input Bridge 2 enable input.
15 PHASE 2 input Bridge 2 phase (current direction) input.
16 OUT 2A output Bridge 2 output A.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16
Category Power Management
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Load Supply Voltage Range VBB 30 V Operating, IOUT = ±650 mA, L = 3 mH; min cell prints 'VCC' (symbol, no number) 4
Output Leakage Current ICEX 50 µA VOUT = 30 V; typ cell prints '<1.0' 4
Output Leakage Current ICEX -50 µA VOUT = 0 V; typ cell prints '<-1.0' 4
Output Saturation Voltage, Source Driver VCE(SAT) 1.7 2 V IOUT = -400 mA 4
Output Saturation Voltage, Source Driver VCE(SAT) 1.8 2.1 V IOUT = -650 mA 4
Output Saturation Voltage, Sink Driver VCE(SAT) 0.3 0.5 V IOUT = +400 mA, VS = 0.5 V 4
Output Saturation Voltage, Sink Driver VCE(SAT) 0.7 1.3 V IOUT = +650 mA, VS = 0.5 V 4
Clamp Diode Forward Voltage VF 1.1 1.4 V IF = 400 mA 4
Clamp Diode Forward Voltage VF 1.4 1.6 V IF = 650 mA 4
Motor Supply Current (No Load) IBB(ON) 3 5 mA VENABLE1 = VENABLE2 = 0.8 V 4
Motor Supply Current (No Load) IBB(OFF) 200 µA VENABLE1 = VENABLE2 = 2.4 V; typ cell prints '<1.0' 4
Logic Supply Voltage Range VCC 4.75 5.5 V Operating 4
Logic Input Voltage VIN(1) 2.4 V 4
Logic Input Voltage VIN(0) 0.8 V 4
Logic Input Current IIN(1) 20 µA VIN = 2.4 V; typ cell prints '<1.0' 4
Logic Input Current IIN(0) -200 µA VIN = 0.8 V; typ cell prints '<-20' 4
Reference Input Voltage Range VREF 0.1 2 V Operating 4
Reference Input Current IREF -2.5 0 1 µA 4
Reference Divider Ratio VREF/VTRIP 3.8 4 4.2 4
Current-Sense Comparator Input Offset Voltage VIO -6 0 6 mV VREF = 0 V 4
Current-Sense Comparator Input Voltage Range VS -0.3 1 V Operating 4
Sense-Current Offset ISO 12 18 24 mA IS, IOUT, 50 mA ≤ IOUT ≤ 650 mA 4
PWM RC Frequency fosc 22.9 25.4 27.9 kHz CT = 680 pF, RT = 56 kΩ 5
PWM Propagation Delay Time tPWM 1 1.4 µs Comparator Trip to Source OFF 5
PWM Propagation Delay Time 0.8 1.2 µs Cycle Reset to Source ON 5
Cross-Over Dead Time tcodt 0.2 1.8 3 µs 1 kΩ Load to 25 V 5
UVLO Enable Threshold VT(UVLO)+ 4.1 4.6 V Increasing VCC 5
UVLO Hysteresis VT(UVLO)hys 0.1 0.6 V 5
Logic Supply Current ICC(ON) 50 mA VENABLE 1 = VENABLE 2 = 0.8 V 5
Logic Supply Current ICC(OFF) 9 mA VENABLE 1 = VENABLE 2 = 2.4 V 5
Load Supply Voltage VBB 30 V 2
Logic Supply Voltage VCC 7 V 2
Input Voltage VIN -0.3 V 2
Sense Voltage VS 1 V 2
Output Current, Peak IOUT -750 750 mA Peak; may be limited by duty cycle, ambient temperature, and heat sinking 2
Output Current, Continuous IOUT -650 650 mA Continuous 2
Package Power Dissipation PD 1.87 W TA = 25°C 2
Operating Ambient Temperature Range TA -20 85 °C Range S 2
Maximum Junction Temperature TJ(max) 150 °C 2
Storage Temperature Tstg -55 150 °C 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin These pins are at ground potential and need no electrical isolation. The device is lead (Pb) free, with 100% matte tin leadframe plating. 2

CAD (Adom-generated)

  • Symbol: A3966SLBTR-T
  • Footprint: Adom_Gen:Allegro_MicroSystems_A3966_e3f53c
  • 3D model: generated to fit the land (STEP)
  • 3D model files: a3966slbtr-t-etched.step / a3966slbtr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a3966slbtr-t.step / a3966slbtr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (9 pp, sha256 353b83ce257a9954, retrieved 2026-11-13, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Allegro A3966 p.7 'Package LB, 16-pin SOICW' (Reference Allegro DWG-0000388 Rev. 1, JEDEC MS-013AA), C 'PCB Layout Reference View': pads 2.25 x 0.65, 1.27 BSC pitch, 9.50 between pad-row centres, so pads at x +/-4.75. Body 10.21 ± 0.10 x 7.50 ± 0.10, tip to tip 10.31 ± 0.20, height 2.54 ± 0.10. (The drawing's note cites 'IPC7351 SOIC127P600X175-8M', an 8-pin narrow pattern name; the printed numbers are the wide 16-pin land and are used.)

Datasheet PDF