component
A1330LLETR-P-T
Public Made by Adomby adom
Allegro MicroSystems, LLC Angle, Linear Position Sensors, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
A1330LLETR-P-T
Allegro MicroSystems, LLC · Angle, Linear Position Sensors · TSSOP-8
A1330LLETR-P-T from Allegro MicroSystems, LLC, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Device power supply, specified at 4.5 to 5.5 V, and also serves as the Manchester communication input pin. |
| 2 | VOUT | bidirectional | Angle output (analog or PWM for this PWM-output variant), which also carries the Manchester output during serial communication and receives EEPROM programming pulses. |
| 3 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 4 | GND | power_in | Ground connection for the device. |
| 5 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 6 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 7 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 8 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | TSSOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5.5 | V | 5 | ||
| Supply Current, one die, PWM output, unloaded output | ICC | 8.5 | 10 | mA | One die, PWM output, unloaded output | 5 | |
| Undervoltage Lockout Threshold Voltage, rising VCC | VUVLO(H) | 4.65 | V | Maximum VCC, dV/dt = 1 V/ms, TA = 25°C, A1330 sampling enabled, rising VCC | 5 | ||
| Undervoltage Lockout Threshold Voltage, falling VCC | VUVLO(L) | 3.9 | 4.5 | V | Maximum VCC, dV/dt = 1 V/ms, TA = 25°C, A1330 sampling disabled, falling VCC | 5 | |
| Overvoltage Lockout Threshold Voltage, falling VCC | VOVLO(L) | 5.5 | 5.9 | V | Maximum VCC, dV/dt = 1 V/ms, TA = 25°C, A1330 sampling enabled | 5 | |
| Supply Zener Clamp Voltage | VZSUP | 26.5 | V | ICC = ICC + 3 mA, TA = 25°C | 5 | ||
| Reverse-Battery Current | IRCC | 5 | mA | VRCC = 18 V, TA = 25°C | 5 | ||
| Undervoltage Lockout Threshold Hysteresis | VUVLO(HYS) | 180 | mV | dV/dt = 1 V/ms, TA = 25°C | 5 | ||
| Overvoltage Lockout Threshold Voltage, falling VCC (disabled) | VOVLO(H) | 6.3 | V | Maximum VCC, dV/dt = -1 V/ms, TA = 25°C, A1330 sampling disabled | 5 | ||
| Overvoltage Lockout Threshold Hysteresis | VOVLO(HYS) | 450 | mV | dV/dt = -1 V/ms, TA = 25°C | 5 | ||
| Power-On Time | tPO | 300 | µs | 5 | |||
| Output Current Limit, minimum output | ILIMIT | 24 | 29 | 34 | mA | Minimum output, shorted to 5 V | 6 |
| Pull-up Load | RL | 4.7 | kΩ | 6 | |||
| PWM Carrier Frequency | fPWM | 156.25 | 1250 | 20000 | Hz | Programmable, 3 bit field | 6 |
| PWM Duty Cycle Minimum | DPWM(MIN) | 5 | % | LOW_CLAMP = 0 | 6 | ||
| PWM Duty Cycle Maximum | DPWM(MAX) | 95 | % | HIGH_CLAMP = 0 | 6 | ||
| Clamp High | VCLAMP(H) | 32 | 95 | % VCC or DC | Valid for Analog or PWM output, EEPROM programmable | 6 | |
| Clamp Low | VCLAMP(L) | 5 | 68 | % VCC or DC | Valid for Analog or PWM output, EEPROM programmable | 6 | |
| Magnetic Field Range | B | 1200 | G | Range of input field | 6 | ||
| Angle Output Resolution | RESANGLE | 12 | bit | 6 | |||
| Angle Refresh Rate | tANG | 25 | µs | ANG_AVE = 0 | 6 | ||
| Response Time | tRESPONSE | 120 | µs | ANG_AVE = 0 | 6 | ||
| Response Time | tRESPONSE | 200 | µs | ANG_AVE = 3 | 6 | ||
| Temperature Drift, angle change from 25°C at 150°C | ANGLEDRIFT | -1.8 | 0.5 | 1.8 | degrees | Angle change from 25°C; TA = 150°C, B = 300 G | 6 |
| Temperature Drift, angle change from 25°C at -40°C | ANGLEDRIFT | 0.8 | degrees | Angle change from 25°C; TA = -40°C, B = 300 G | 6 | ||
| Angle Error at 25°C | ERRANG | -1.1 | 0.4 | 1.1 | degrees | TA = 25°C, ideal magnet alignment, B = 300 G | 6 |
| Angle Error at 150°C | ERRANG | -1.5 | 0.5 | 1.5 | degrees | TA = 150°C, ideal magnet alignment, B = 300 G | 6 |
| Angle Noise at 25°C (3 sigma) | NANG | 0.6 | degrees | TA = 25°C, B = 300 G, no internal filtering, target rpm = 0, 3 sigma, PWM output | 6 | ||
| Angle Noise at 150°C (3 sigma) | NANG | 0.75 | degrees | TA = 150°C, B = 300 G, no internal filtering, target rpm = 0, 3 sigma, PWM output | 6 | ||
| Angle Drift Over Lifetime | ANGLEDRIFT_LIFE | 0.5 | degrees | B = 300 G, typical angle drift observed following AEC-Q100 qualification testing | 6 | ||
| Forward Supply Voltage | VCC | 26.5 | V | Not sampling angles | 2 | ||
| Reverse Supply Voltage | VRCC | -18 | V | Not sampling angles | 2 | ||
| Forward Output Voltage | VOUT | 16 | V | VOUT < VCC + 2 V | 2 | ||
| Reverse Output Voltage | VROUT | 0.5 | V | 2 | |||
| Operating Ambient Temperature | TA | -40 | 150 | °C | L range | 2 | |
| Maximum Junction Temperature | TJ(max) | 165 | °C | 2 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 2 | ||
| Package Thermal Resistance, junction to ambient | RθJA | 145 | °C/W | LE-8 single die package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | in an 8-pin TSSOP. The package is lead (Pb) free with 100% matte-tin leadframe plating. | 1 |
CAD (KiCad official)
- Symbol:
A1330LLETR-P-T - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
a1330lletr-p-t-etched.step/a1330lletr-p-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);a1330lletr-p-t.step/a1330lletr-p-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (40 pp, sha256
71ff967c2bb769fd, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# A1330LLETR-P-T
**Allegro MicroSystems, LLC** · Angle, Linear Position Sensors · TSSOP-8
A1330LLETR-P-T from Allegro MicroSystems, LLC, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Device power supply, specified at 4.5 to 5.5 V, and also serves as the Manchester communication input pin. |
| 2 | VOUT | bidirectional | Angle output (analog or PWM for this PWM-output variant), which also carries the Manchester output during serial communication and receives EEPROM programming pulses. |
| 3 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 4 | GND | power_in | Ground connection for the device. |
| 5 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 6 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 7 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
| 8 | NC | unconnected | Not connected; the datasheet says it must be tied to GND for optimum ESD performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | TSSOP-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | | 5.5 | V | | 5 |
| Supply Current, one die, PWM output, unloaded output | ICC | | 8.5 | 10 | mA | One die, PWM output, unloaded output | 5 |
| Undervoltage Lockout Threshold Voltage, rising VCC | VUVLO(H) | | | 4.65 | V | Maximum VCC, dV/dt = 1 V/ms, TA = 25°C, A1330 sampling enabled, rising VCC | 5 |
| Undervoltage Lockout Threshold Voltage, falling VCC | VUVLO(L) | 3.9 | | 4.5 | V | Maximum VCC, dV/dt = 1 V/ms, TA = 25°C, A1330 sampling disabled, falling VCC | 5 |
| Overvoltage Lockout Threshold Voltage, falling VCC | VOVLO(L) | 5.5 | 5.9 | | V | Maximum VCC, dV/dt = 1 V/ms, TA = 25°C, A1330 sampling enabled | 5 |
| Supply Zener Clamp Voltage | VZSUP | 26.5 | | | V | ICC = ICC + 3 mA, TA = 25°C | 5 |
| Reverse-Battery Current | IRCC | | | 5 | mA | VRCC = 18 V, TA = 25°C | 5 |
| Undervoltage Lockout Threshold Hysteresis | VUVLO(HYS) | | 180 | | mV | dV/dt = 1 V/ms, TA = 25°C | 5 |
| Overvoltage Lockout Threshold Voltage, falling VCC (disabled) | VOVLO(H) | | 6.3 | | V | Maximum VCC, dV/dt = -1 V/ms, TA = 25°C, A1330 sampling disabled | 5 |
| Overvoltage Lockout Threshold Hysteresis | VOVLO(HYS) | | 450 | | mV | dV/dt = -1 V/ms, TA = 25°C | 5 |
| Power-On Time | tPO | | 300 | | µs | | 5 |
| Output Current Limit, minimum output | ILIMIT | 24 | 29 | 34 | mA | Minimum output, shorted to 5 V | 6 |
| Pull-up Load | RL | 4.7 | | | kΩ | | 6 |
| PWM Carrier Frequency | fPWM | 156.25 | 1250 | 20000 | Hz | Programmable, 3 bit field | 6 |
| PWM Duty Cycle Minimum | DPWM(MIN) | | 5 | | % | LOW_CLAMP = 0 | 6 |
| PWM Duty Cycle Maximum | DPWM(MAX) | | 95 | | % | HIGH_CLAMP = 0 | 6 |
| Clamp High | VCLAMP(H) | 32 | | 95 | % VCC or DC | Valid for Analog or PWM output, EEPROM programmable | 6 |
| Clamp Low | VCLAMP(L) | 5 | | 68 | % VCC or DC | Valid for Analog or PWM output, EEPROM programmable | 6 |
| Magnetic Field Range | B | | | 1200 | G | Range of input field | 6 |
| Angle Output Resolution | RESANGLE | | 12 | | bit | | 6 |
| Angle Refresh Rate | tANG | | 25 | | µs | ANG_AVE = 0 | 6 |
| Response Time | tRESPONSE | | 120 | | µs | ANG_AVE = 0 | 6 |
| Response Time | tRESPONSE | | 200 | | µs | ANG_AVE = 3 | 6 |
| Temperature Drift, angle change from 25°C at 150°C | ANGLEDRIFT | -1.8 | 0.5 | 1.8 | degrees | Angle change from 25°C; TA = 150°C, B = 300 G | 6 |
| Temperature Drift, angle change from 25°C at -40°C | ANGLEDRIFT | | 0.8 | | degrees | Angle change from 25°C; TA = -40°C, B = 300 G | 6 |
| Angle Error at 25°C | ERRANG | -1.1 | 0.4 | 1.1 | degrees | TA = 25°C, ideal magnet alignment, B = 300 G | 6 |
| Angle Error at 150°C | ERRANG | -1.5 | 0.5 | 1.5 | degrees | TA = 150°C, ideal magnet alignment, B = 300 G | 6 |
| Angle Noise at 25°C (3 sigma) | NANG | | 0.6 | | degrees | TA = 25°C, B = 300 G, no internal filtering, target rpm = 0, 3 sigma, PWM output | 6 |
| Angle Noise at 150°C (3 sigma) | NANG | | 0.75 | | degrees | TA = 150°C, B = 300 G, no internal filtering, target rpm = 0, 3 sigma, PWM output | 6 |
| Angle Drift Over Lifetime | ANGLEDRIFT_LIFE | | 0.5 | | degrees | B = 300 G, typical angle drift observed following AEC-Q100 qualification testing | 6 |
| Forward Supply Voltage | VCC | | | 26.5 | V | Not sampling angles | 2 |
| Reverse Supply Voltage | VRCC | -18 | | | V | Not sampling angles | 2 |
| Forward Output Voltage | VOUT | | | 16 | V | VOUT < VCC + 2 V | 2 |
| Reverse Output Voltage | VROUT | | | 0.5 | V | | 2 |
| Operating Ambient Temperature | TA | -40 | | 150 | °C | L range | 2 |
| Maximum Junction Temperature | TJ(max) | | | 165 | °C | | 2 |
| Storage Temperature | Tstg | -65 | | 170 | °C | | 2 |
| Package Thermal Resistance, junction to ambient | RθJA | | 145 | | °C/W | LE-8 single die package | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | in an 8-pin TSSOP. The package is lead (Pb) free with 100% matte-tin leadframe plating. | 1 |
## CAD (KiCad official)
- Symbol: `A1330LLETR-P-T`
- Footprint: `Package_SO:TSSOP-8_4.4x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `a1330lletr-p-t-etched.step` / `a1330lletr-p-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `a1330lletr-p-t.step` / `a1330lletr-p-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/a1330lletr-p-t-datasheet.pdf) (40 pp, sha256 `71ff967c2bb769fd`, retrieved 2026-11-06, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/a1330lletr-p-t-datasheet.pdf)