component
A1230LLTR-T
Public Made by Adomby adom
Allegro MicroSystems, LLC Magnetic Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
A1230LLTR-T
Allegro MicroSystems, LLC · Magnetic Sensors · SOIC-8
A1230LLTR-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Connects power supply to the on-chip voltage regulator; operating range 3.3 to 18 V (absolute maximum 26.5 V, reverse battery -16 V). |
| 2 | OUTPUTA | output | Open-drain output from Hall element E1 via the first Schmitt circuit, requires a pull-up resistor, sinks up to 20 mA with 160 mV typical low-level voltage. |
| 3 | OUTPUTB | output | Open-drain output from Hall element E2 via the second Schmitt circuit, requires a pull-up resistor, sinks up to 20 mA with 160 mV typical low-level voltage. |
| 4 | GND | power_in | Terminal for ground connection. |
| 5 | NC | unconnected | No connection. |
| 6 | NC | unconnected | No connection. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.3 | 18 | V | Operating; TA ≤ 150°C | 4 | |
| Output Leakage Current | IOUTPUT(OFF) | 1 | 10 | μA | Either output | 4 | |
| Supply Current (off) | ICC(OFF) | 3.5 | 6 | mA | B < BRP(A), B < BRP(B) | 4 | |
| Supply Current (on) | ICC(ON) | 3.5 | 6 | mA | B > BOP(A), B > BOP(B) | 4 | |
| Low Output Voltage | VOUTPUT(ON) | 160 | 500 | mV | Both outputs; IOUTPUT(SINK) = 20 mA; B > BOP(A), B > BOP(B) | 4 | |
| Output Sink Current | IOUTPUT(SINK) | 20 | mA | 4 | |||
| Output Sink Current, Continuous | IOUTPUT(SINK)C | 70 | mA | TJ < TJ(max), VOUTPUT = 12 V | 4 | ||
| Output Sink Current, Peak | IOUTPUT(SINK)P | 220 | mA | t < 3 seconds | 4 | ||
| Supply Zener Voltage | VZ | 28 | V | ICC = 9 mA, TA = 25°C | 4 | ||
| Supply Zener Current | IZ | 9 | mA | VS = 28 V | 4 | ||
| Reverse-Battery Current | IRCC | 2 | 15 | mA | VRCC = -18 V, TJ < TJ(max) | 4 | |
| Operate Point | BOP(A),BOP(B) | 7 | 30 | G | B > BOP | 4 | |
| Release Point | BRP(A),BRP(B) | -30 | -7 | G | B < BRP | 4 | |
| Hysteresis | BHYS(A),BHYS(B) | 5 | 14 | 35 | G | BOP - BRP | 4 |
| Symmetry Channel A, Channel B | SYMA,SYMB | -35 | 35 | G | BOP + BRP | 4 | |
| Operate Symmetry | SYMAB(OP) | -25 | 25 | G | BOP(A), BOP(B) | 4 | |
| Release Symmetry | SYMAB(RP) | -25 | 25 | G | BRP(A), BRP(B) | 4 | |
| Supply Voltage (abs max) | VCC | 26.5 | V | 3 | |||
| Reverse Battery Voltage | VRCC | -16 | V | 3 | |||
| Output Off Voltage | VOUTPUT | 26.5 | V | Rating printed as VCC | 3 | ||
| Operating Ambient Temperature | TA | -40 | 150 | ºC | Range L | 3 | |
| Maximum Junction Temperature | TJ(max) | 165 | ºC | 3 | |||
| Storage Temperature | Tstg | -65 | 170 | ºC | 3 | ||
| Package Thermal Resistance | RθJA | 140 | ºC/W | Package L-8 pin, 1-layer PCB with copper limited to solder pads | 6 | ||
| Package Thermal Resistance | RθJA | 80 | ºC/W | Package L-8 pin, 4-layer PCB based on JEDEC standard | 6 | ||
| Chopping Frequency | fC | 780 | kHz | 4 | |||
| Output Rise Time | tr | 1.8 | µs | CLOAD = 20 pF, RLOAD = 820 Ω | 4 | ||
| Output Fall Time | tf | 1.2 | µs | CLOAD = 20 pF, RLOAD = 820 Ω | 4 | ||
| Power-On Time | tON | 15 | µs | B > 40 G or B < -40 G | 4 | ||
| Power-Off Time | tOFF | 25 | µs | B > 40 G or B < -40 G | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | temperature range of -40°C to 150°C. Each package is lead (Pb) free, with 100% matte-tin-plated leadframe. | 2 |
CAD (KiCad official)
- Symbol:
A1230LLTR-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
a1230lltr-t-etched.step/a1230lltr-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);a1230lltr-t.step/a1230lltr-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (17 pp, sha256
c4f43d8a9efb52e7, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# A1230LLTR-T
**Allegro MicroSystems, LLC** · Magnetic Sensors · SOIC-8
A1230LLTR-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Connects power supply to the on-chip voltage regulator; operating range 3.3 to 18 V (absolute maximum 26.5 V, reverse battery -16 V). |
| 2 | OUTPUTA | output | Open-drain output from Hall element E1 via the first Schmitt circuit, requires a pull-up resistor, sinks up to 20 mA with 160 mV typical low-level voltage. |
| 3 | OUTPUTB | output | Open-drain output from Hall element E2 via the second Schmitt circuit, requires a pull-up resistor, sinks up to 20 mA with 160 mV typical low-level voltage. |
| 4 | GND | power_in | Terminal for ground connection. |
| 5 | NC | unconnected | No connection. |
| 6 | NC | unconnected | No connection. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.3 | | 18 | V | Operating; TA ≤ 150°C | 4 |
| Output Leakage Current | IOUTPUT(OFF) | | 1 | 10 | μA | Either output | 4 |
| Supply Current (off) | ICC(OFF) | | 3.5 | 6 | mA | B < BRP(A), B < BRP(B) | 4 |
| Supply Current (on) | ICC(ON) | | 3.5 | 6 | mA | B > BOP(A), B > BOP(B) | 4 |
| Low Output Voltage | VOUTPUT(ON) | | 160 | 500 | mV | Both outputs; IOUTPUT(SINK) = 20 mA; B > BOP(A), B > BOP(B) | 4 |
| Output Sink Current | IOUTPUT(SINK) | | | 20 | mA | | 4 |
| Output Sink Current, Continuous | IOUTPUT(SINK)C | | | 70 | mA | TJ < TJ(max), VOUTPUT = 12 V | 4 |
| Output Sink Current, Peak | IOUTPUT(SINK)P | | | 220 | mA | t < 3 seconds | 4 |
| Supply Zener Voltage | VZ | 28 | | | V | ICC = 9 mA, TA = 25°C | 4 |
| Supply Zener Current | IZ | | | 9 | mA | VS = 28 V | 4 |
| Reverse-Battery Current | IRCC | | 2 | 15 | mA | VRCC = -18 V, TJ < TJ(max) | 4 |
| Operate Point | BOP(A),BOP(B) | | 7 | 30 | G | B > BOP | 4 |
| Release Point | BRP(A),BRP(B) | -30 | -7 | | G | B < BRP | 4 |
| Hysteresis | BHYS(A),BHYS(B) | 5 | 14 | 35 | G | BOP - BRP | 4 |
| Symmetry Channel A, Channel B | SYMA,SYMB | -35 | | 35 | G | BOP + BRP | 4 |
| Operate Symmetry | SYMAB(OP) | -25 | | 25 | G | BOP(A), BOP(B) | 4 |
| Release Symmetry | SYMAB(RP) | -25 | | 25 | G | BRP(A), BRP(B) | 4 |
| Supply Voltage (abs max) | VCC | | | 26.5 | V | | 3 |
| Reverse Battery Voltage | VRCC | -16 | | | V | | 3 |
| Output Off Voltage | VOUTPUT | | | 26.5 | V | Rating printed as VCC | 3 |
| Operating Ambient Temperature | TA | -40 | | 150 | ºC | Range L | 3 |
| Maximum Junction Temperature | TJ(max) | | | 165 | ºC | | 3 |
| Storage Temperature | Tstg | -65 | | 170 | ºC | | 3 |
| Package Thermal Resistance | RθJA | | 140 | | ºC/W | Package L-8 pin, 1-layer PCB with copper limited to solder pads | 6 |
| Package Thermal Resistance | RθJA | | 80 | | ºC/W | Package L-8 pin, 4-layer PCB based on JEDEC standard | 6 |
| Chopping Frequency | fC | | 780 | | kHz | | 4 |
| Output Rise Time | tr | | 1.8 | | µs | CLOAD = 20 pF, RLOAD = 820 Ω | 4 |
| Output Fall Time | tf | | 1.2 | | µs | CLOAD = 20 pF, RLOAD = 820 Ω | 4 |
| Power-On Time | tON | | 15 | | µs | B > 40 G or B < -40 G | 4 |
| Power-Off Time | tOFF | | 25 | | µs | B > 40 G or B < -40 G | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | temperature range of -40°C to 150°C. Each package is lead (Pb) free, with 100% matte-tin-plated leadframe. | 2 |
## CAD (KiCad official)
- Symbol: `A1230LLTR-T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `a1230lltr-t-etched.step` / `a1230lltr-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `a1230lltr-t.step` / `a1230lltr-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/a1230lltr-t-datasheet.pdf) (17 pp, sha256 `c4f43d8a9efb52e7`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/a1230lltr-t-datasheet.pdf)