component
A1220LLHLX-T
Public Made by Adomby adom
Allegro MicroSystems, LLC Magnetic Sensors, SOT-23W. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownA1220LLHLX-T
Allegro MicroSystems, LLC · Magnetic Sensors · SOT-23W
A1220LLHLX-T from Allegro MicroSystems, LLC, in a SOT-23W. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Connects power supply to chip; operates from 3 to 24 V (absolute maximum forward supply voltage 26.5 V, reverse -30 V). |
| 2 | VOUT | output | Open-drain, short-circuit protected output that sinks up to 25 mA continuous (current limit 30 to 60 mA) and has an absolute maximum off voltage of 26 V. |
| 3 | GND | power_in | Ground connection for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOT-23W |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Supply Voltage (operating) | VCC | 3 | 24 | V | Operating, TJ < 165°C | 4 | |
| Output Leakage Current | IOUTOFF | 10 | µA | VOUT = 24 V, B < BRP | 4 | ||
| Output Saturation Voltage | VOUT(SAT) | 185 | 500 | mV | IOUT = 20 mA, B > BOP | 4 | |
| Output Current Limit | IOM | 30 | 60 | mA | B > BOP | 4 | |
| Power-On Time | tPO | 25 | µs | VCC > 3.0 V, B < BRP(min), 10 G, B > BOP(max) + 10 G | 4 | ||
| Output Rise Time | tr | 0.2 | 2 | µs | RL = 820 Ω, CL = 20 pF | 4 | |
| Output Fall Time | tf | 0.1 | 2 | µs | RL = 820 Ω, CL = 20 pF | 4 | |
| Supply Current (On) | ICC(ON) | 4 | mA | B > BOP, VCC = 12 V | 4 | ||
| Supply Current (Off) | ICC(OFF) | 4 | mA | B < BRP, VCC = 12 V | 4 | ||
| Reverse Supply Current | IRCC | -5 | mA | VRCC = -20 V | 4 | ||
| Supply Zener Clamp Voltage | VZ | 28 | V | ICC = 5 mA; TA = 25°C | 4 | ||
| Operate Point (A1220) | BOP | 5 | 22 | 40 | G | 4 | |
| Release Point (A1220) | BRP | -40 | -23 | -5 | G | 4 | |
| Hysteresis (A1220) | BHYS | 10 | 45 | 80 | G | BOP, BRP | 4 |
| Chopping Frequency | fC | 800 | kHz | 4 | |||
| Zener Impedance | IZ | 50 | Ω | ICC = 5 mA; TA = 25°C | 4 | ||
| Forward Supply Voltage | VCC | 26.5 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -30 | V | 3 | |||
| Output Off Voltage | VOUT | 26 | V | 3 | |||
| Continuous Output Current | IOUT | 25 | mA | 3 | |||
| Reverse Output Current | IROUT | -50 | mA | 3 | |||
| Operating Ambient Temperature (Range L) | TA | -40 | 150 | °C | Range L | 3 | |
| Maximum Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Maximum Junction Temperature (500 hours) | TJ(max) | 175 | °C | For 500 hours | 3 | ||
| Storage Temperature | Tstg | -65 | 170 | °C | 3 | ||
| Package Thermal Resistance | RθJA | 228 | °C/W | Package LH, 1-layer PCB with copper limited to solder pads | 5 | ||
| Package Thermal Resistance | RθJA | 110 | °C/W | Package LH, 2-layer PCB with 0.463 in.2 of copper area each side connected by thermal vias | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | lead (Pb) free, with 100% matte-tin-plated leadframes. A1220-DS, Rev. 21 | 1 |
CAD (KiCad official)
- Symbol:
A1220LLHLX-T - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23W (KiCad packages3D, STEP)
- 3D model files:
a1220llhlx-t-etched.step/a1220llhlx-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);a1220llhlx-t.step/a1220llhlx-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (16 pp, sha256
dd72570929d5da96, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).