← Commit history

Initial commit: component/93lc56bt-i

Ray ·aadd57e925 ·
2 files changed +87
README.mdadded+53
@@ -0,0 +1,53 @@+# 93LC56BT-I++**Microchip** · EEPROM · SOT-23-6++93LC56BT-I from Microchip, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | Chip Select. Active-high; a low level deselects the device and forces it into Standby mode. Must be low for TCSL = 250 ns minimum between consecutive instructions. VIH = 0.7*VCC (VCC<2.7V) or 2.0V (VCC>=2.7V). |+| 2 | CLK | input | Serial Clock. Synchronizes communication between master device and 93XX device. Opcodes, address and data bits are clocked in on the positive edge of CLK; data bits are also clocked out on positive edge. FCLK max = 2 MHz (2.5V<=VCC<5.5V) or 1 MHz (1.8V<=VCC<2.5V). |+| 3 | DI | input | Data In. Used to clock in a Start bit, opcode, address and data synchronously with the CLK input on rising edge. Input setup time TDIS = 100 ns min (2.5V<=VCC<5.5V). |+| 4 | DO | tri_state | Data Out. Outputs data synchronously with CLK input during READ (TPD after positive edge of CLK). Also provides Ready/Busy status information during erase/write cycles when CS is brought high after the minimum TCSL low time. Enters High-Z on falling edge of CS. |+| 5 | VSS | power_in | Ground reference for all signals and the internal supply return. |+| 6 | NC | unconnected | No internal connection on the 'B' version. This pin position is used as the ORG (organization select) pin on the 'C' version of the family; on the 93LC56B the x16 organization is fixed and no ORG pin function is present. |+| 7 | NC | unconnected | No internal connection. May be left floating. |+| 8 | VCC | power_in | Power supply input. Operating range 2.5V to 5.5V for the 93LC family. Absolute maximum 7.0V. Standby current typ 1 uA (I-temp). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip |+| Package | SOT-23-6 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `93LC56BT-ISN`+- `93LC56BT-IP`+- `93LC56BT-IMS`+- `93LC56BT-IST`+- `93LC56BT-IMC`+- `93LC56BT-IMNY`+- `93LC56BT-IOT`++## CAD (KiCad official)++- Symbol: `93LC56BT-I`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip datasheet](docs/93lc56bt-i-datasheet.pdf) (None pp, sha256 `f9a7698e3531a357`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/93lc56bt-i-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "93lc56bt-i",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip EEPROM, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "93lc56bt-i"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "93lc56bt-i.kicad_sym",+    "93lc56bt-i.kicad_mod",+    "93lc56bt-i.glb",+    "93lc56bt-i.step",+    "93lc56bt-i.lbr",+    "docs/hero.png",+    "docs/93lc56bt-i-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file