← Commit history

93lc56bt-i: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·33e6ce4552 · ·parent 4a09f28
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "93LC56BT-I",+    "manufacturer": "Microchip",+    "package": "SOT-23-6",+    "pin_count": 8,+    "category": "EEPROM",+    "parts": {+      "symbol": "93lc56bt-i.kicad_sym",+      "footprint": "93lc56bt-i.kicad_mod",+      "model_3d": "93lc56bt-i-etched.glb",+      "model_3d_plain": "93lc56bt-i.glb",+      "model_3d_step": "93lc56bt-i-etched.step",+      "model_3d_step_plain": "93lc56bt-i.step",+      "lbr": "93lc56bt-i.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "CS",+        "type": "input",+        "description": "Chip Select. Active-high; a low level deselects the device and forces it into Standby mode. Must be low for TCSL = 250 ns minimum between consecutive instructions. VIH = 0.7*VCC (VCC<2.7V) or 2.0V (VCC>=2.7V)."+      },+      {+        "number": "2",+        "name": "CLK",+        "type": "input",+        "description": "Serial Clock. Synchronizes communication between master device and 93XX device. Opcodes, address and data bits are clocked in on the positive edge of CLK; data bits are also clocked out on positive edge. FCLK max = 2 MHz (2.5V<=VCC<5.5V) or 1 MHz (1.8V<=VCC<2.5V)."+      },+      {+        "number": "3",+        "name": "DI",+        "type": "input",+        "description": "Data In. Used to clock in a Start bit, opcode, address and data synchronously with the CLK input on rising edge. Input setup time TDIS = 100 ns min (2.5V<=VCC<5.5V)."+      },+      {+        "number": "4",+        "name": "DO",+        "type": "tri_state",+        "description": "Data Out. Outputs data synchronously with CLK input during READ (TPD after positive edge of CLK). Also provides Ready/Busy status information during erase/write cycles when CS is brought high after the minimum TCSL low time. Enters High-Z on falling edge of CS."+      },+      {+        "number": "5",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for all signals and the internal supply return."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection on the 'B' version. This pin position is used as the ORG (organization select) pin on the 'C' version of the family; on the 93LC56B the x16 organization is fixed and no ORG pin function is present."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. May be left floating."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input. Operating range 2.5V to 5.5V for the 93LC family. Absolute maximum 7.0V. Standby current typ 1 uA (I-temp)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}