component
93LC46BX-I
Public Made by Adomby adom
Microchip Tech Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown93LC46BX-I
Microchip Tech · Pre-ordered Chips · SOIC-8
93LC46BX-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection on this rotated-pinout SOIC; the 93XX46A/B devices (including 93LC46B) have no internal connection on this pin. |
| 2 | VCC | power_in | Power supply; the 93LC46B is specified for VCC of 2.5-5.5 V per the device selection table. |
| 3 | CS | input | Chip Select: a high level selects the device and a low level deselects it and forces Standby mode; CS must be low for 250 ns minimum (TCSL) between consecutive instructions. |
| 4 | CLK | input | Serial Clock that synchronizes communication; opcodes, address and data bits are clocked in on the positive edge of CLK, and data bits are clocked out on the positive edge. |
| 5 | DI | input | Serial Data Input used to clock in a Start bit, opcode, address and data synchronously with CLK. |
| 6 | DO | output | Serial Data Output that outputs read data synchronously with CLK (TPD after the positive edge of CLK) and provides Ready/Busy status during erase and write cycles when CS is brought high after TCSL. |
| 7 | VSS | power_in | Ground reference for the device. |
| 8 | ORG/NC | unconnected | ORG is the organization select only on 93XX46C devices; on 93XX46A/B devices, including 93LC46B, this pin is No Internal Connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level input voltage | VIH1 | 2 | V | VCC 2.7V | 3 | ||
| Low-level input voltage | VIL1 | -0.3 | 0.8 | V | VCC 2.7V | 3 | |
| Low-level input voltage | VIL2 | -0.3 | V | VCC 2.7V | 3 | ||
| Low-level output voltage | VOL1 | 0.4 | V | IOL = 2.1 mA, VCC = 4.5V | 3 | ||
| Low-level output voltage | VOL2 | 0.2 | V | IOL = 100 A, VCC = 2.5V | 3 | ||
| High-level output voltage | VOH1 | 2.4 | V | IOH = -400 A, VCC = 4.5V | 3 | ||
| Input leakage current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output leakage current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin capacitance (all inputs/outputs) | CIN, COUT | 7 | pF | VIN/VOUT = 0V (Note 1); TA = 25°C, FCLK = 1 MHz | 3 | ||
| Write current | ICC write | 500 | mA | FCLK = 3 MHz, VCC = 5.5V | 3 | ||
| Write current | ICC write | 2 | µA | FCLK = 2 MHz, VCC = 2.5V | 3 | ||
| Read current | ICC read | 100 | mA | FCLK = 3 MHz, VCC = 5.5V | 3 | ||
| Read current | ICC read | 1 | µA | FCLK = 2 MHz, VCC = 3.0V | 3 | ||
| Read current | ICC read | 500 | µA | FCLK = 2 MHz, VCC = 2.5V | 3 | ||
| Standby current (I-Temp) | ICCS | 1 | µA | I-Temp; CLK = CS = 0V; ORG = DI = VSS or VCC (Note 2)(Note 3) | 3 | ||
| VCC voltage detect | VPOR | 1.5 | 3.8 | V | (Note 1) | 3 | |
| Supply voltage range (93LC46B) | VCC | 2.5 | 5.5 | V | 93LC46B, Device Selection Table | 1 | |
| Operating ambient temperature (Industrial) | TA | -40 | 85 | °C | Industrial (I) grade | 1 | |
| Supply voltage | VCC | 7 | V | 3 | |||
| All inputs and outputs w.r.t. VSS (lower limit) | -0.6 | V | w.r.t. VSS | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | power applied | 3 | ||
| Clock frequency | FCLK | 2 | MHz | 2.5V VCC 5.5V | 4 | ||
| Clock high time | TCKH | 250 | ns | 2.5V VCC 5.5V | 4 | ||
| Clock low time | TCKL | 200 | ns | 2.5V VCC 5.5V | 4 | ||
| Chip Select setup time | TCSS | 50 | ns | 4.5V VCC 5.5V | 4 | ||
| Chip Select setup time | TCSS | 100 | ns | 2.5V VCC 4.5V | 4 | ||
| Chip Select hold time | TCSH | 0 | ns | 1.8V VCC 5.5V | 4 | ||
| Chip Select low time | TCSL | 250 | ns | 1.8V VCC 5.5V | 4 | ||
| Data input setup time | TDIS | 100 | ns | 2.5V VCC 5.5V | 4 | ||
| Data input hold time | TDIH | 100 | ns | 2.5V VCC 5.5V | 4 | ||
| Data output delay time | TPD | 200 | ns | 4.5V VCC 5.5V, CL = 100 pF | 4 | ||
| Data output delay time | TPD | 250 | ns | 2.5V VCC 4.5V, CL = 100 pF | 4 | ||
| Data output disable time | TCZ | 100 | ns | 4.5V VCC 5.5V (Note 1) | 4 | ||
| Data output disable time | TCZ | 200 | ns | 1.8V VCC 4.5V (Note 1) | 4 | ||
| Status valid time | TSV | 200 | ns | 4.5V VCC 5.5V, CL = 100 pF | 4 | ||
| Status valid time | TSV | 300 | ns | 2.5V VCC 4.5V, CL = 100 pF | 4 | ||
| Program cycle time | TWC | 6 | ms | Erase/Write mode (AA and LC versions) | 4 | ||
| ERAL cycle time | TEC | 6 | ms | ERAL mode, 4.5V VCC 5.5V | 4 | ||
| WRAL cycle time | TWL | 15 | ms | WRAL mode, 4.5V VCC 5.5V | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 2x3 DFN/TDFN and 8-lead TSSOP. All packages are Pb-free (Matte Tin) finish. | 1 |
CAD (KiCad official)
- Symbol:
93LC46BX-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
93lc46bx-i-etched.step/93lc46bx-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);93lc46bx-i.step/93lc46bx-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
c8f3fc7ae87c89f3, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).