component

925-126J-51P

Public Made by Adom

by adom

Amphenol RF RF Coaxial Connectors (SMPM jack), 925-126j-51p. KiCad symbol, footprint and 3D as used on Adom boards.

componentconnectors925-126j-51pboard-derived

Verified 925-126J-51P

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Amphenol RF customer outline drawing 925-126J-51P Rev A; footprint and 3D rebuilt to itfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: Amphenol RF customer outline drawing 925-126J-51P Rev A (03-Jun-16, ECO 00941), the file the product page https://www.amphenolrf.com/en-us/part/925-126j-51p/4449/ links today (asset 4065789372, fetched 2026-10-27, sha256 d0f7d88e2577de06). Amphenol's file is vector art with no text layer; the attached copy is that file with an invisible OCR text layer (ocrmypdf 15.2), renders pixel-identical. Replaces the page's 400 dpi raster + OCR copy
  • ✓BOM: rf-molecules rf-scaffold-module J3, J4 (BOM 'Conn_Coaxial_Small,J3/J4,925-126j-51p', footprint coax:925-126j-51p): the intended part is this page's MPN
  • ✓Pins: 1 CONTACT = centre contact, 2 BODY = body (names from the drawing's materials list; the drawing has no pin table); both passive; descriptions rewritten from the drawing, cited p.1
  • ✓Footprint rebuilt to the RECOMMENDED PCB LAYOUT, x = 0 on the board edge: Edge.Cuts slot 3.60 (3.6 +-0.05) wide x 5.03 deep (was 3.40 x 5.00, zero clearance to the 3.4 REF body); outer pads 0..8.12 from the edge, outer edges 4.92 apart, inner edges 3.60 apart over the slot and 2.08 apart from 5.03 to 8.12 (each an L of two rectangles numbered 2, so EAGLE/Fusion keep the full copper); centre pad 0.97 wide from 5.03 to 8.28 (was 5.10..8.35: every copper edge had been 0.07 further from the edge than drawn)
  • ✓3D: Amphenol RF's STP download (asset 4066964497) redirects to the myAmphenol login and the site has no redistribution licence; KiCad has no SMPM model; model built by Adom from the drawing (tier 3, CC-BY-SA-4.0, builder provenance/tools/build_925-126j-51p.py): 7.95 REF to the tab ends, contact to 8.11, 4.47 wide, z -1.40..2.11 (3.51 REF, 2.11 REF), 3.4 REF below the board with 0.32 chamfers, tabs 0.58 thick on z = 0, contact 0.71 dia on the axis 0.36 above the mounting plane; bore depth and pin tip position are not dimensioned (display assumptions, in provenance/3d-model.json)
  • ✓Pose (step_pose.py, both STEPs): Z-up, identity binding, centre 0.085 mm from the pad-pattern centre, seated on z = 0 on the pads with the body 1.40 mm below the board through the Edge.Cuts slot, as the drawing requires; MPN etched on the top flat (adom-chip-laser)
  • ✓DigiKey ARF2549-ND and Mouser 523-925-126J-51P (Amphenol RF 925-126J-51P), confirmed by part lookup 2026-10-27
  • •Boards to update (Caleb): rf-scaffold-module J3, J4 still carry the 3.40 x 5.00 slot and the 0.07 mm copper offset, and their 3D model reference is 925-169J-51PT_SMPM_Coax.step (another part)
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Amphenol RF)product page
Verified files✓ 925-126j-51p.kicad_sym✓ 925-126j-51p.kicad_mod✓ 925-126j-51p.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and v...superseded
reviewfor all variants
  • •On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and vice versa (swapped). This page uses the geometry placed for this reference designator; confirm it matches the Amphenol 925-126J-51P drawing.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 925-126j-51p.kicad_sym! 925-126j-51p.kicad_mod! 925-126j-51p.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Licensed 3D model, datasheet text layer and verification log

Caleb ·d8e8fec073 ·19d ago ·parent 8e755a6
7 files changed +2481−43
925-126j-51p.glb925-126j-51p.step+2461README.md+3−3docs/925-126j-51p-datasheet.pdfdocs/hero.pngpackage.json+14−14verification.json+3−26
925-126j-51p.glbadded
⋯ 1 unchanged line ⋯
925-126j-51p.stepadded+2461
@@ -0,0 +1,2461 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-09T22:11:15',('Author'),(+    'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+  ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+  'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+  'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('925-126j-51p','925-126j-51p','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23),#27);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26);+#24 = CARTESIAN_POINT('',(0.,0.,0.));+#25 = DIRECTION('',(0.,0.,1.));+#26 = DIRECTION('',(1.,0.,-0.));+#27 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#31)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#28,#29,#30)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#28 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#29 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#30 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#31 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-05),#28,+  'distance_accuracy_value','confusion accuracy');+#32 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#33 = SHAPE_DEFINITION_REPRESENTATION(#34,#40);+#34 = PRODUCT_DEFINITION_SHAPE('','',#35);+#35 = PRODUCT_DEFINITION('design','',#36,#39);+#36 = PRODUCT_DEFINITION_FORMATION('','',#37);+#37 = PRODUCT('body','body','',(#38));+#38 = PRODUCT_CONTEXT('',#2,'mechanical');+#39 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#40 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#41),#1557);+#41 = MANIFOLD_SOLID_BREP('',#42);+#42 = CLOSED_SHELL('',(#43,#480,#535,#539,#615,#691,#767,#1079,#1155,+    #1226,#1254,#1282,#1309,#1334,#1361,#1386,#1413,#1439,#1466,#1495,+    #1521,#1548));+#43 = ADVANCED_FACE('',(#44,#445),#58,.F.);+#44 = FACE_BOUND('',#45,.F.);+#45 = EDGE_LOOP('',(#46,#81,#109,#137,#166,#194,#223,#251,#279,#307,#335+    ,#363,#391,#419));+#46 = ORIENTED_EDGE('',*,*,#47,.F.);+#47 = EDGE_CURVE('',#48,#50,#52,.T.);+#48 = VERTEX_POINT('',#49);+#49 = CARTESIAN_POINT('',(0.,2.235,0.));+#50 = VERTEX_POINT('',#51);+#51 = CARTESIAN_POINT('',(0.,1.7,0.));+#52 = SURFACE_CURVE('',#53,(#57,#69),.PCURVE_S1.);+#53 = LINE('',#54,#55);+#54 = CARTESIAN_POINT('',(0.,2.235,0.));+#55 = VECTOR('',#56,1.);+#56 = DIRECTION('',(0.,-1.,0.));+#57 = PCURVE('',#58,#63);+#58 = PLANE('',#59);+#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62);+#60 = CARTESIAN_POINT('',(0.,-7.64787546163E-17,0.36));+#61 = DIRECTION('',(1.,0.,0.));+#62 = DIRECTION('',(-0.,0.,1.));+#63 = DEFINITIONAL_REPRESENTATION('',(#64),#68);+#64 = LINE('',#65,#66);+#65 = CARTESIAN_POINT('',(-0.36,-2.235));+#66 = VECTOR('',#67,1.);+#67 = DIRECTION('',(0.,1.));+#68 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#69 = PCURVE('',#70,#75);+#70 = PLANE('',#71);+#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74);+#72 = CARTESIAN_POINT('',(0.,-3.235,0.));+#73 = DIRECTION('',(0.,0.,1.));+#74 = DIRECTION('',(1.,0.,0.));+#75 = DEFINITIONAL_REPRESENTATION('',(#76),#80);+#76 = LINE('',#77,#78);+#77 = CARTESIAN_POINT('',(0.,5.47));+#78 = VECTOR('',#79,1.);+#79 = DIRECTION('',(0.,-1.));+#80 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#81 = ORIENTED_EDGE('',*,*,#82,.F.);+#82 = EDGE_CURVE('',#83,#48,#85,.T.);+#83 = VERTEX_POINT('',#84);+#84 = CARTESIAN_POINT('',(0.,2.235,0.58));+#85 = SURFACE_CURVE('',#86,(#90,#97),.PCURVE_S1.);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(0.,2.235,0.58));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(0.,0.,-1.));+#90 = PCURVE('',#58,#91);+#91 = DEFINITIONAL_REPRESENTATION('',(#92),#96);+#92 = LINE('',#93,#94);+#93 = CARTESIAN_POINT('',(0.22,-2.235));+#94 = VECTOR('',#95,1.);+#95 = DIRECTION('',(-1.,0.));+#96 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#97 = PCURVE('',#98,#103);+#98 = PLANE('',#99);+#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102);+#100 = CARTESIAN_POINT('',(0.,2.235,0.));+#101 = DIRECTION('',(0.,1.,0.));+#102 = DIRECTION('',(0.,0.,1.));+#103 = DEFINITIONAL_REPRESENTATION('',(#104),#108);+#104 = LINE('',#105,#106);+#105 = CARTESIAN_POINT('',(0.58,0.));+#106 = VECTOR('',#107,1.);+#107 = DIRECTION('',(-1.,0.));+#108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#109 = ORIENTED_EDGE('',*,*,#110,.F.);+#110 = EDGE_CURVE('',#111,#83,#113,.T.);+#111 = VERTEX_POINT('',#112);+#112 = CARTESIAN_POINT('',(0.,2.224145903487,0.58));+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(0.,-2.235,0.58));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#58,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(0.22,2.235));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(0.,-2.235,0.58));+#129 = DIRECTION('',(0.,0.,1.));+#130 = DIRECTION('',(1.,0.,0.));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,0.));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(0.,1.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#137 = ORIENTED_EDGE('',*,*,#138,.T.);+#138 = EDGE_CURVE('',#111,#139,#141,.T.);+#139 = VERTEX_POINT('',#140);+#140 = CARTESIAN_POINT('',(0.,1.390224801966,2.11));+#141 = SURFACE_CURVE('',#142,(#147,#154),.PCURVE_S1.);+#142 = CIRCLE('',#143,2.235);+#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146);+#144 = CARTESIAN_POINT('',(0.,0.,0.36));+#145 = DIRECTION('',(1.,0.,0.));+#146 = DIRECTION('',(0.,0.986942360393,-0.161073825503));+#147 = PCURVE('',#58,#148);+#148 = DEFINITIONAL_REPRESENTATION('',(#149),#153);+#149 = CIRCLE('',#150,2.235);+#150 = AXIS2_PLACEMENT_2D('',#151,#152);+#151 = CARTESIAN_POINT('',(-1.665334536938E-16,-7.64787546163E-17));+#152 = DIRECTION('',(-0.161073825503,-0.986942360393));+#153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#154 = PCURVE('',#155,#160);+#155 = CYLINDRICAL_SURFACE('',#156,2.235);+#156 = AXIS2_PLACEMENT_3D('',#157,#158,#159);+#157 = CARTESIAN_POINT('',(0.,0.,0.36));+#158 = DIRECTION('',(-1.,-0.,-0.));+#159 = DIRECTION('',(0.,1.,0.));+#160 = DEFINITIONAL_REPRESENTATION('',(#161),#165);+#161 = LINE('',#162,#163);+#162 = CARTESIAN_POINT('',(-6.121406717957,0.));+#163 = VECTOR('',#164,1.);+#164 = DIRECTION('',(-1.,0.));+#165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#166 = ORIENTED_EDGE('',*,*,#167,.F.);+#167 = EDGE_CURVE('',#168,#139,#170,.T.);+#168 = VERTEX_POINT('',#169);+#169 = CARTESIAN_POINT('',(0.,-1.390224801966,2.11));+#170 = SURFACE_CURVE('',#171,(#175,#182),.PCURVE_S1.);+#171 = LINE('',#172,#173);+#172 = CARTESIAN_POINT('',(0.,-3.235,2.11));+#173 = VECTOR('',#174,1.);+#174 = DIRECTION('',(0.,1.,0.));+#175 = PCURVE('',#58,#176);+#176 = DEFINITIONAL_REPRESENTATION('',(#177),#181);+#177 = LINE('',#178,#179);+#178 = CARTESIAN_POINT('',(1.75,3.235));+#179 = VECTOR('',#180,1.);+#180 = DIRECTION('',(0.,-1.));+#181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#182 = PCURVE('',#183,#188);+#183 = PLANE('',#184);+#184 = AXIS2_PLACEMENT_3D('',#185,#186,#187);+#185 = CARTESIAN_POINT('',(0.,-3.235,2.11));+#186 = DIRECTION('',(0.,0.,1.));+#187 = DIRECTION('',(1.,0.,0.));+#188 = DEFINITIONAL_REPRESENTATION('',(#189),#193);+#189 = LINE('',#190,#191);+#190 = CARTESIAN_POINT('',(0.,0.));+#191 = VECTOR('',#192,1.);+#192 = DIRECTION('',(0.,1.));+#193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#194 = ORIENTED_EDGE('',*,*,#195,.T.);+#195 = EDGE_CURVE('',#168,#196,#198,.T.);+#196 = VERTEX_POINT('',#197);+#197 = CARTESIAN_POINT('',(0.,-2.224145903487,0.58));+#198 = SURFACE_CURVE('',#199,(#204,#211),.PCURVE_S1.);+#199 = CIRCLE('',#200,2.235);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(0.,0.,0.36));+#202 = DIRECTION('',(1.,0.,0.));+#203 = DIRECTION('',(0.,1.,0.));+#204 = PCURVE('',#58,#205);+#205 = DEFINITIONAL_REPRESENTATION('',(#206),#210);+#206 = CIRCLE('',#207,2.235);+#207 = AXIS2_PLACEMENT_2D('',#208,#209);+#208 = CARTESIAN_POINT('',(-1.665334536938E-16,-7.64787546163E-17));+#209 = DIRECTION('',(0.,-1.));+#210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#211 = PCURVE('',#212,#217);+#212 = CYLINDRICAL_SURFACE('',#213,2.235);+#213 = AXIS2_PLACEMENT_3D('',#214,#215,#216);+#214 = CARTESIAN_POINT('',(0.,0.,0.36));+#215 = DIRECTION('',(-1.,-0.,-0.));+#216 = DIRECTION('',(0.,1.,0.));+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(-0.,0.));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(-1.,0.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#223 = ORIENTED_EDGE('',*,*,#224,.F.);+#224 = EDGE_CURVE('',#225,#196,#227,.T.);+#225 = VERTEX_POINT('',#226);+#226 = CARTESIAN_POINT('',(0.,-2.235,0.58));+#227 = SURFACE_CURVE('',#228,(#232,#239),.PCURVE_S1.);+#228 = LINE('',#229,#230);+#229 = CARTESIAN_POINT('',(0.,-2.235,0.58));+#230 = VECTOR('',#231,1.);+#231 = DIRECTION('',(0.,1.,0.));+#232 = PCURVE('',#58,#233);+#233 = DEFINITIONAL_REPRESENTATION('',(#234),#238);+#234 = LINE('',#235,#236);+#235 = CARTESIAN_POINT('',(0.22,2.235));+#236 = VECTOR('',#237,1.);+#237 = DIRECTION('',(0.,-1.));+#238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#239 = PCURVE('',#240,#245);+#240 = PLANE('',#241);+#241 = AXIS2_PLACEMENT_3D('',#242,#243,#244);+#242 = CARTESIAN_POINT('',(0.,-2.235,0.58));+#243 = DIRECTION('',(0.,0.,1.));+#244 = DIRECTION('',(1.,0.,0.));+#245 = DEFINITIONAL_REPRESENTATION('',(#246),#250);+#246 = LINE('',#247,#248);+#247 = CARTESIAN_POINT('',(0.,0.));+#248 = VECTOR('',#249,1.);+#249 = DIRECTION('',(0.,1.));+#250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#251 = ORIENTED_EDGE('',*,*,#252,.F.);+#252 = EDGE_CURVE('',#253,#225,#255,.T.);+#253 = VERTEX_POINT('',#254);+#254 = CARTESIAN_POINT('',(0.,-2.235,0.));+#255 = SURFACE_CURVE('',#256,(#260,#267),.PCURVE_S1.);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(0.,-2.235,0.));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(0.,0.,1.));+#260 = PCURVE('',#58,#261);+#261 = DEFINITIONAL_REPRESENTATION('',(#262),#266);+#262 = LINE('',#263,#264);+#263 = CARTESIAN_POINT('',(-0.36,2.235));+#264 = VECTOR('',#265,1.);+#265 = DIRECTION('',(1.,0.));+#266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#267 = PCURVE('',#268,#273);+#268 = PLANE('',#269);+#269 = AXIS2_PLACEMENT_3D('',#270,#271,#272);+#270 = CARTESIAN_POINT('',(0.,-2.235,0.));+#271 = DIRECTION('',(0.,1.,0.));+#272 = DIRECTION('',(0.,0.,1.));+#273 = DEFINITIONAL_REPRESENTATION('',(#274),#278);+#274 = LINE('',#275,#276);+#275 = CARTESIAN_POINT('',(0.,0.));+#276 = VECTOR('',#277,1.);+#277 = DIRECTION('',(1.,0.));+#278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#279 = ORIENTED_EDGE('',*,*,#280,.F.);+#280 = EDGE_CURVE('',#281,#253,#283,.T.);+#281 = VERTEX_POINT('',#282);+#282 = CARTESIAN_POINT('',(0.,-1.7,0.));+#283 = SURFACE_CURVE('',#284,(#288,#295),.PCURVE_S1.);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,2.235,0.));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(0.,-1.,0.));+#288 = PCURVE('',#58,#289);+#289 = DEFINITIONAL_REPRESENTATION('',(#290),#294);+#290 = LINE('',#291,#292);+#291 = CARTESIAN_POINT('',(-0.36,-2.235));+#292 = VECTOR('',#293,1.);+#293 = DIRECTION('',(0.,1.));+#294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#295 = PCURVE('',#296,#301);+#296 = PLANE('',#297);+#297 = AXIS2_PLACEMENT_3D('',#298,#299,#300);+#298 = CARTESIAN_POINT('',(0.,-3.235,0.));+#299 = DIRECTION('',(0.,0.,1.));+#300 = DIRECTION('',(1.,0.,0.));+#301 = DEFINITIONAL_REPRESENTATION('',(#302),#306);+#302 = LINE('',#303,#304);+#303 = CARTESIAN_POINT('',(0.,5.47));+#304 = VECTOR('',#305,1.);+#305 = DIRECTION('',(0.,-1.));+#306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#307 = ORIENTED_EDGE('',*,*,#308,.F.);+#308 = EDGE_CURVE('',#309,#281,#311,.T.);+#309 = VERTEX_POINT('',#310);+#310 = CARTESIAN_POINT('',(0.,-1.7,-1.1));+#311 = SURFACE_CURVE('',#312,(#316,#323),.PCURVE_S1.);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(0.,-1.7,-1.4));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(0.,0.,1.));+#316 = PCURVE('',#58,#317);+#317 = DEFINITIONAL_REPRESENTATION('',(#318),#322);+#318 = LINE('',#319,#320);+#319 = CARTESIAN_POINT('',(-1.76,1.7));+#320 = VECTOR('',#321,1.);+#321 = DIRECTION('',(1.,0.));+#322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#323 = PCURVE('',#324,#329);+#324 = PLANE('',#325);+#325 = AXIS2_PLACEMENT_3D('',#326,#327,#328);+#326 = CARTESIAN_POINT('',(0.,-1.7,-1.4));+#327 = DIRECTION('',(0.,1.,0.));+#328 = DIRECTION('',(0.,0.,1.));+#329 = DEFINITIONAL_REPRESENTATION('',(#330),#334);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(0.,0.));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.));+#334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#335 = ORIENTED_EDGE('',*,*,#336,.T.);+#336 = EDGE_CURVE('',#309,#337,#339,.T.);+#337 = VERTEX_POINT('',#338);+#338 = CARTESIAN_POINT('',(0.,-1.4,-1.4));+#339 = SURFACE_CURVE('',#340,(#344,#351),.PCURVE_S1.);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-1.55,-1.25));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#344 = PCURVE('',#58,#345);+#345 = DEFINITIONAL_REPRESENTATION('',(#346),#350);+#346 = LINE('',#347,#348);+#347 = CARTESIAN_POINT('',(-1.61,1.55));+#348 = VECTOR('',#349,1.);+#349 = DIRECTION('',(-0.707106781187,-0.707106781187));+#350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#351 = PCURVE('',#352,#357);+#352 = PLANE('',#353);+#353 = AXIS2_PLACEMENT_3D('',#354,#355,#356);+#354 = CARTESIAN_POINT('',(0.,-1.55,-1.25));+#355 = DIRECTION('',(0.,-0.707106781187,-0.707106781187));+#356 = DIRECTION('',(-1.,-0.,-0.));+#357 = DEFINITIONAL_REPRESENTATION('',(#358),#362);+#358 = LINE('',#359,#360);+#359 = CARTESIAN_POINT('',(-0.,0.));+#360 = VECTOR('',#361,1.);+#361 = DIRECTION('',(-0.,1.));+#362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#363 = ORIENTED_EDGE('',*,*,#364,.T.);+#364 = EDGE_CURVE('',#337,#365,#367,.T.);+#365 = VERTEX_POINT('',#366);+#366 = CARTESIAN_POINT('',(0.,1.4,-1.4));+#367 = SURFACE_CURVE('',#368,(#372,#379),.PCURVE_S1.);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(0.,-1.7,-1.4));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(0.,1.,0.));+#372 = PCURVE('',#58,#373);+#373 = DEFINITIONAL_REPRESENTATION('',(#374),#378);+#374 = LINE('',#375,#376);+#375 = CARTESIAN_POINT('',(-1.76,1.7));+#376 = VECTOR('',#377,1.);+#377 = DIRECTION('',(0.,-1.));+#378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#379 = PCURVE('',#380,#385);+#380 = PLANE('',#381);+#381 = AXIS2_PLACEMENT_3D('',#382,#383,#384);+#382 = CARTESIAN_POINT('',(0.,-1.7,-1.4));+#383 = DIRECTION('',(0.,0.,1.));+#384 = DIRECTION('',(1.,0.,0.));+#385 = DEFINITIONAL_REPRESENTATION('',(#386),#390);+#386 = LINE('',#387,#388);+#387 = CARTESIAN_POINT('',(0.,0.));+#388 = VECTOR('',#389,1.);+#389 = DIRECTION('',(0.,1.));+#390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#391 = ORIENTED_EDGE('',*,*,#392,.F.);+#392 = EDGE_CURVE('',#393,#365,#395,.T.);+#393 = VERTEX_POINT('',#394);+#394 = CARTESIAN_POINT('',(0.,1.7,-1.1));+#395 = SURFACE_CURVE('',#396,(#400,#407),.PCURVE_S1.);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,0.7,-2.1));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(0.,-0.707106781187,-0.707106781187));+#400 = PCURVE('',#58,#401);+#401 = DEFINITIONAL_REPRESENTATION('',(#402),#406);+#402 = LINE('',#403,#404);+#403 = CARTESIAN_POINT('',(-2.46,-0.7));+#404 = VECTOR('',#405,1.);+#405 = DIRECTION('',(-0.707106781187,0.707106781187));+#406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#407 = PCURVE('',#408,#413);+#408 = PLANE('',#409);+#409 = AXIS2_PLACEMENT_3D('',#410,#411,#412);+#410 = CARTESIAN_POINT('',(0.,1.55,-1.25));+#411 = DIRECTION('',(0.,-0.707106781187,0.707106781187));+#412 = DIRECTION('',(-1.,-0.,-0.));+#413 = DEFINITIONAL_REPRESENTATION('',(#414),#418);+#414 = LINE('',#415,#416);+#415 = CARTESIAN_POINT('',(-0.,1.202081528017));+#416 = VECTOR('',#417,1.);+#417 = DIRECTION('',(-0.,1.));+#418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#419 = ORIENTED_EDGE('',*,*,#420,.T.);+#420 = EDGE_CURVE('',#393,#50,#421,.T.);+#421 = SURFACE_CURVE('',#422,(#426,#433),.PCURVE_S1.);+#422 = LINE('',#423,#424);+#423 = CARTESIAN_POINT('',(0.,1.7,-1.4));+#424 = VECTOR('',#425,1.);+#425 = DIRECTION('',(0.,0.,1.));+#426 = PCURVE('',#58,#427);+#427 = DEFINITIONAL_REPRESENTATION('',(#428),#432);+#428 = LINE('',#429,#430);+#429 = CARTESIAN_POINT('',(-1.76,-1.7));+#430 = VECTOR('',#431,1.);+#431 = DIRECTION('',(1.,0.));+#432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#433 = PCURVE('',#434,#439);+#434 = PLANE('',#435);+#435 = AXIS2_PLACEMENT_3D('',#436,#437,#438);+#436 = CARTESIAN_POINT('',(0.,1.7,-1.4));+#437 = DIRECTION('',(0.,1.,0.));+#438 = DIRECTION('',(0.,0.,1.));+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(0.,0.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,0.));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#445 = FACE_BOUND('',#446,.F.);+#446 = EDGE_LOOP('',(#447));+#447 = ORIENTED_EDGE('',*,*,#448,.T.);+#448 = EDGE_CURVE('',#449,#449,#451,.T.);+#449 = VERTEX_POINT('',#450);+#450 = CARTESIAN_POINT('',(0.,1.425,0.36));+#451 = SURFACE_CURVE('',#452,(#457,#468),.PCURVE_S1.);+#452 = CIRCLE('',#453,1.425);+#453 = AXIS2_PLACEMENT_3D('',#454,#455,#456);+#454 = CARTESIAN_POINT('',(0.,0.,0.36));+#455 = DIRECTION('',(-1.,0.,0.));+#456 = DIRECTION('',(0.,1.,0.));+#457 = PCURVE('',#58,#458);+#458 = DEFINITIONAL_REPRESENTATION('',(#459),#467);+#459 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#460,#461,#462,#463,#464,#465+,#466),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+    -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#460 = CARTESIAN_POINT('',(-1.665334536938E-16,-1.425));+#461 = CARTESIAN_POINT('',(-2.468172400786,-1.425));+#462 = CARTESIAN_POINT('',(-1.234086200393,0.7125));+#463 = CARTESIAN_POINT('',(-5.155577914508E-16,2.85));+#464 = CARTESIAN_POINT('',(1.234086200393,0.7125));+#465 = CARTESIAN_POINT('',(2.468172400786,-1.425));+#466 = CARTESIAN_POINT('',(-1.665334536938E-16,-1.425));+#467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#468 = PCURVE('',#469,#474);+#469 = CYLINDRICAL_SURFACE('',#470,1.425);+#470 = AXIS2_PLACEMENT_3D('',#471,#472,#473);+#471 = CARTESIAN_POINT('',(-0.1,0.,0.36));+#472 = DIRECTION('',(-1.,-0.,-0.));+#473 = DIRECTION('',(0.,1.,0.));+#474 = DEFINITIONAL_REPRESENTATION('',(#475),#479);+#475 = LINE('',#476,#477);+#476 = CARTESIAN_POINT('',(-6.28318530718,-0.1));+#477 = VECTOR('',#478,1.);+#478 = DIRECTION('',(1.,-0.));+#479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#480 = ADVANCED_FACE('',(#481),#469,.F.);+#481 = FACE_BOUND('',#482,.T.);+#482 = EDGE_LOOP('',(#483,#484,#507,#534));+#483 = ORIENTED_EDGE('',*,*,#448,.T.);+#484 = ORIENTED_EDGE('',*,*,#485,.T.);+#485 = EDGE_CURVE('',#449,#486,#488,.T.);+#486 = VERTEX_POINT('',#487);+#487 = CARTESIAN_POINT('',(1.8,1.425,0.36));+#488 = SEAM_CURVE('',#489,(#493,#500),.PCURVE_S1.);+#489 = LINE('',#490,#491);+#490 = CARTESIAN_POINT('',(-0.1,1.425,0.36));+#491 = VECTOR('',#492,1.);+#492 = DIRECTION('',(1.,0.,0.));+#493 = PCURVE('',#469,#494);+#494 = DEFINITIONAL_REPRESENTATION('',(#495),#499);+#495 = LINE('',#496,#497);+#496 = CARTESIAN_POINT('',(-6.28318530718,0.));+#497 = VECTOR('',#498,1.);+#498 = DIRECTION('',(-0.,-1.));+#499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#500 = PCURVE('',#469,#501);+#501 = DEFINITIONAL_REPRESENTATION('',(#502),#506);+#502 = LINE('',#503,#504);+#503 = CARTESIAN_POINT('',(-0.,0.));+#504 = VECTOR('',#505,1.);+#505 = DIRECTION('',(-0.,-1.));+#506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#507 = ORIENTED_EDGE('',*,*,#508,.T.);+#508 = EDGE_CURVE('',#486,#486,#509,.T.);+#509 = SURFACE_CURVE('',#510,(#515,#522),.PCURVE_S1.);+#510 = CIRCLE('',#511,1.425);+#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514);+#512 = CARTESIAN_POINT('',(1.8,0.,0.36));+#513 = DIRECTION('',(1.,0.,0.));+#514 = DIRECTION('',(0.,1.,0.));+#515 = PCURVE('',#469,#516);+#516 = DEFINITIONAL_REPRESENTATION('',(#517),#521);+#517 = LINE('',#518,#519);+#518 = CARTESIAN_POINT('',(-0.,-1.9));+#519 = VECTOR('',#520,1.);+#520 = DIRECTION('',(-1.,0.));+#521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#522 = PCURVE('',#523,#528);+#523 = PLANE('',#524);+#524 = AXIS2_PLACEMENT_3D('',#525,#526,#527);+#525 = CARTESIAN_POINT('',(1.8,-8.996316661444E-17,0.36));+#526 = DIRECTION('',(1.,0.,0.));+#527 = DIRECTION('',(-0.,0.,1.));+#528 = DEFINITIONAL_REPRESENTATION('',(#529),#533);+#529 = CIRCLE('',#530,1.425);+#530 = AXIS2_PLACEMENT_2D('',#531,#532);+#531 = CARTESIAN_POINT('',(-1.110223024625E-16,-8.996316661444E-17));+#532 = DIRECTION('',(0.,-1.));+#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#534 = ORIENTED_EDGE('',*,*,#485,.F.);+#535 = ADVANCED_FACE('',(#536),#523,.F.);+#536 = FACE_BOUND('',#537,.F.);+#537 = EDGE_LOOP('',(#538));+#538 = ORIENTED_EDGE('',*,*,#508,.T.);+#539 = ADVANCED_FACE('',(#540),#268,.F.);+#540 = FACE_BOUND('',#541,.F.);+#541 = EDGE_LOOP('',(#542,#543,#566,#594));+#542 = ORIENTED_EDGE('',*,*,#252,.T.);+#543 = ORIENTED_EDGE('',*,*,#544,.T.);+#544 = EDGE_CURVE('',#225,#545,#547,.T.);+#545 = VERTEX_POINT('',#546);+#546 = CARTESIAN_POINT('',(7.95,-2.235,0.58));+#547 = SURFACE_CURVE('',#548,(#552,#559),.PCURVE_S1.);+#548 = LINE('',#549,#550);+#549 = CARTESIAN_POINT('',(0.,-2.235,0.58));+#550 = VECTOR('',#551,1.);+#551 = DIRECTION('',(1.,0.,0.));+#552 = PCURVE('',#268,#553);+#553 = DEFINITIONAL_REPRESENTATION('',(#554),#558);+#554 = LINE('',#555,#556);+#555 = CARTESIAN_POINT('',(0.58,0.));+#556 = VECTOR('',#557,1.);+#557 = DIRECTION('',(0.,1.));+#558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#559 = PCURVE('',#240,#560);+#560 = DEFINITIONAL_REPRESENTATION('',(#561),#565);+#561 = LINE('',#562,#563);+#562 = CARTESIAN_POINT('',(0.,0.));+#563 = VECTOR('',#564,1.);+#564 = DIRECTION('',(1.,0.));+#565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#566 = ORIENTED_EDGE('',*,*,#567,.F.);+#567 = EDGE_CURVE('',#568,#545,#570,.T.);+#568 = VERTEX_POINT('',#569);+#569 = CARTESIAN_POINT('',(7.95,-2.235,0.));+#570 = SURFACE_CURVE('',#571,(#575,#582),.PCURVE_S1.);+#571 = LINE('',#572,#573);+#572 = CARTESIAN_POINT('',(7.95,-2.235,0.));+#573 = VECTOR('',#574,1.);+#574 = DIRECTION('',(0.,0.,1.));+#575 = PCURVE('',#268,#576);+#576 = DEFINITIONAL_REPRESENTATION('',(#577),#581);+#577 = LINE('',#578,#579);+#578 = CARTESIAN_POINT('',(0.,7.95));+#579 = VECTOR('',#580,1.);+#580 = DIRECTION('',(1.,0.));+#581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#582 = PCURVE('',#583,#588);+#583 = PLANE('',#584);+#584 = AXIS2_PLACEMENT_3D('',#585,#586,#587);+#585 = CARTESIAN_POINT('',(7.95,-2.235,0.));+#586 = DIRECTION('',(1.,0.,0.));+#587 = DIRECTION('',(0.,0.,1.));+#588 = DEFINITIONAL_REPRESENTATION('',(#589),#593);+#589 = LINE('',#590,#591);+#590 = CARTESIAN_POINT('',(0.,0.));+#591 = VECTOR('',#592,1.);+#592 = DIRECTION('',(1.,0.));+#593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#594 = ORIENTED_EDGE('',*,*,#595,.T.);+#595 = EDGE_CURVE('',#568,#253,#596,.T.);+#596 = SURFACE_CURVE('',#597,(#601,#608),.PCURVE_S1.);+#597 = LINE('',#598,#599);+#598 = CARTESIAN_POINT('',(7.95,-2.235,0.));+#599 = VECTOR('',#600,1.);+#600 = DIRECTION('',(-1.,0.,0.));+#601 = PCURVE('',#268,#602);+#602 = DEFINITIONAL_REPRESENTATION('',(#603),#607);+#603 = LINE('',#604,#605);+#604 = CARTESIAN_POINT('',(0.,7.95));+#605 = VECTOR('',#606,1.);+#606 = DIRECTION('',(0.,-1.));+#607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#608 = PCURVE('',#296,#609);+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(7.95,1.));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(-1.,0.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#615 = ADVANCED_FACE('',(#616),#583,.T.);+#616 = FACE_BOUND('',#617,.T.);+#617 = EDGE_LOOP('',(#618,#619,#642,#670));+#618 = ORIENTED_EDGE('',*,*,#567,.F.);+#619 = ORIENTED_EDGE('',*,*,#620,.T.);+#620 = EDGE_CURVE('',#568,#621,#623,.T.);+#621 = VERTEX_POINT('',#622);+#622 = CARTESIAN_POINT('',(7.95,-1.38,0.));+#623 = SURFACE_CURVE('',#624,(#628,#635),.PCURVE_S1.);+#624 = LINE('',#625,#626);+#625 = CARTESIAN_POINT('',(7.95,-2.235,0.));+#626 = VECTOR('',#627,1.);+#627 = DIRECTION('',(0.,1.,0.));+#628 = PCURVE('',#583,#629);+#629 = DEFINITIONAL_REPRESENTATION('',(#630),#634);+#630 = LINE('',#631,#632);+#631 = CARTESIAN_POINT('',(0.,0.));+#632 = VECTOR('',#633,1.);+#633 = DIRECTION('',(0.,-1.));+#634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#635 = PCURVE('',#296,#636);+#636 = DEFINITIONAL_REPRESENTATION('',(#637),#641);+#637 = LINE('',#638,#639);+#638 = CARTESIAN_POINT('',(7.95,1.));+#639 = VECTOR('',#640,1.);+#640 = DIRECTION('',(0.,1.));+#641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#642 = ORIENTED_EDGE('',*,*,#643,.T.);+#643 = EDGE_CURVE('',#621,#644,#646,.T.);+#644 = VERTEX_POINT('',#645);+#645 = CARTESIAN_POINT('',(7.95,-1.38,0.58));+#646 = SURFACE_CURVE('',#647,(#651,#658),.PCURVE_S1.);+#647 = LINE('',#648,#649);+#648 = CARTESIAN_POINT('',(7.95,-1.38,0.));+#649 = VECTOR('',#650,1.);+#650 = DIRECTION('',(0.,0.,1.));+#651 = PCURVE('',#583,#652);+#652 = DEFINITIONAL_REPRESENTATION('',(#653),#657);+#653 = LINE('',#654,#655);+#654 = CARTESIAN_POINT('',(0.,-0.855));+#655 = VECTOR('',#656,1.);+#656 = DIRECTION('',(1.,0.));+#657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#658 = PCURVE('',#659,#664);+#659 = PLANE('',#660);+#660 = AXIS2_PLACEMENT_3D('',#661,#662,#663);+#661 = CARTESIAN_POINT('',(5.03,-1.38,0.));+#662 = DIRECTION('',(0.,1.,0.));+#663 = DIRECTION('',(0.,0.,1.));+#664 = DEFINITIONAL_REPRESENTATION('',(#665),#669);+#665 = LINE('',#666,#667);+#666 = CARTESIAN_POINT('',(0.,2.92));+#667 = VECTOR('',#668,1.);+#668 = DIRECTION('',(1.,0.));+#669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#670 = ORIENTED_EDGE('',*,*,#671,.F.);+#671 = EDGE_CURVE('',#545,#644,#672,.T.);+#672 = SURFACE_CURVE('',#673,(#677,#684),.PCURVE_S1.);+#673 = LINE('',#674,#675);+#674 = CARTESIAN_POINT('',(7.95,-2.235,0.58));+#675 = VECTOR('',#676,1.);+#676 = DIRECTION('',(0.,1.,0.));+#677 = PCURVE('',#583,#678);+#678 = DEFINITIONAL_REPRESENTATION('',(#679),#683);+#679 = LINE('',#680,#681);+#680 = CARTESIAN_POINT('',(0.58,0.));+#681 = VECTOR('',#682,1.);+#682 = DIRECTION('',(0.,-1.));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#684 = PCURVE('',#240,#685);+#685 = DEFINITIONAL_REPRESENTATION('',(#686),#690);+#686 = LINE('',#687,#688);+#687 = CARTESIAN_POINT('',(7.95,0.));+#688 = VECTOR('',#689,1.);+#689 = DIRECTION('',(0.,1.));+#690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#691 = ADVANCED_FACE('',(#692),#659,.T.);+#692 = FACE_BOUND('',#693,.T.);+#693 = EDGE_LOOP('',(#694,#717,#745,#766));+#694 = ORIENTED_EDGE('',*,*,#695,.F.);+#695 = EDGE_CURVE('',#696,#621,#698,.T.);+#696 = VERTEX_POINT('',#697);+#697 = CARTESIAN_POINT('',(5.03,-1.38,0.));+#698 = SURFACE_CURVE('',#699,(#703,#710),.PCURVE_S1.);+#699 = LINE('',#700,#701);+#700 = CARTESIAN_POINT('',(5.03,-1.38,0.));+#701 = VECTOR('',#702,1.);+#702 = DIRECTION('',(1.,0.,0.));+#703 = PCURVE('',#659,#704);+#704 = DEFINITIONAL_REPRESENTATION('',(#705),#709);+#705 = LINE('',#706,#707);+#706 = CARTESIAN_POINT('',(0.,0.));+#707 = VECTOR('',#708,1.);+#708 = DIRECTION('',(0.,1.));+#709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#710 = PCURVE('',#296,#711);+#711 = DEFINITIONAL_REPRESENTATION('',(#712),#716);+#712 = LINE('',#713,#714);+#713 = CARTESIAN_POINT('',(5.03,1.855));+#714 = VECTOR('',#715,1.);+#715 = DIRECTION('',(1.,0.));+#716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#717 = ORIENTED_EDGE('',*,*,#718,.T.);+#718 = EDGE_CURVE('',#696,#719,#721,.T.);+#719 = VERTEX_POINT('',#720);+#720 = CARTESIAN_POINT('',(5.03,-1.38,0.58));+#721 = SURFACE_CURVE('',#722,(#726,#733),.PCURVE_S1.);+#722 = LINE('',#723,#724);+#723 = CARTESIAN_POINT('',(5.03,-1.38,0.));+#724 = VECTOR('',#725,1.);+#725 = DIRECTION('',(0.,0.,1.));+#726 = PCURVE('',#659,#727);+#727 = DEFINITIONAL_REPRESENTATION('',(#728),#732);+#728 = LINE('',#729,#730);+#729 = CARTESIAN_POINT('',(0.,0.));+#730 = VECTOR('',#731,1.);+#731 = DIRECTION('',(1.,0.));+#732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#733 = PCURVE('',#734,#739);+#734 = PLANE('',#735);+#735 = AXIS2_PLACEMENT_3D('',#736,#737,#738);+#736 = CARTESIAN_POINT('',(5.03,-7.64787546163E-17,0.36));+#737 = DIRECTION('',(1.,0.,0.));+#738 = DIRECTION('',(-0.,0.,1.));+#739 = DEFINITIONAL_REPRESENTATION('',(#740),#744);+#740 = LINE('',#741,#742);+#741 = CARTESIAN_POINT('',(-0.36,1.38));+#742 = VECTOR('',#743,1.);+#743 = DIRECTION('',(1.,0.));+#744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#745 = ORIENTED_EDGE('',*,*,#746,.T.);+#746 = EDGE_CURVE('',#719,#644,#747,.T.);+#747 = SURFACE_CURVE('',#748,(#752,#759),.PCURVE_S1.);+#748 = LINE('',#749,#750);+#749 = CARTESIAN_POINT('',(5.03,-1.38,0.58));+#750 = VECTOR('',#751,1.);+#751 = DIRECTION('',(1.,0.,0.));+#752 = PCURVE('',#659,#753);+#753 = DEFINITIONAL_REPRESENTATION('',(#754),#758);+#754 = LINE('',#755,#756);+#755 = CARTESIAN_POINT('',(0.58,0.));+#756 = VECTOR('',#757,1.);+#757 = DIRECTION('',(0.,1.));+#758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#759 = PCURVE('',#240,#760);+#760 = DEFINITIONAL_REPRESENTATION('',(#761),#765);+#761 = LINE('',#762,#763);+#762 = CARTESIAN_POINT('',(5.03,0.855));+#763 = VECTOR('',#764,1.);+#764 = DIRECTION('',(1.,0.));+#765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#766 = ORIENTED_EDGE('',*,*,#643,.F.);+#767 = ADVANCED_FACE('',(#768),#734,.T.);+#768 = FACE_BOUND('',#769,.T.);+#769 = EDGE_LOOP('',(#770,#795,#818,#846,#869,#897,#920,#944,#965,#966,+    #989,#1012,#1035,#1058));+#770 = ORIENTED_EDGE('',*,*,#771,.T.);+#771 = EDGE_CURVE('',#772,#774,#776,.T.);+#772 = VERTEX_POINT('',#773);+#773 = CARTESIAN_POINT('',(5.03,1.7,-1.1));+#774 = VERTEX_POINT('',#775);+#775 = CARTESIAN_POINT('',(5.03,1.7,0.));+#776 = SURFACE_CURVE('',#777,(#781,#788),.PCURVE_S1.);+#777 = LINE('',#778,#779);+#778 = CARTESIAN_POINT('',(5.03,1.7,-1.4));+#779 = VECTOR('',#780,1.);+#780 = DIRECTION('',(0.,0.,1.));+#781 = PCURVE('',#734,#782);+#782 = DEFINITIONAL_REPRESENTATION('',(#783),#787);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(-1.76,-1.7));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(1.,0.));+#787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#788 = PCURVE('',#434,#789);+#789 = DEFINITIONAL_REPRESENTATION('',(#790),#794);+#790 = LINE('',#791,#792);+#791 = CARTESIAN_POINT('',(0.,5.03));+#792 = VECTOR('',#793,1.);+#793 = DIRECTION('',(1.,0.));+#794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#795 = ORIENTED_EDGE('',*,*,#796,.F.);+#796 = EDGE_CURVE('',#797,#774,#799,.T.);+#797 = VERTEX_POINT('',#798);+#798 = CARTESIAN_POINT('',(5.03,1.38,0.));+#799 = SURFACE_CURVE('',#800,(#804,#811),.PCURVE_S1.);+#800 = LINE('',#801,#802);+#801 = CARTESIAN_POINT('',(5.03,1.38,0.));+#802 = VECTOR('',#803,1.);+#803 = DIRECTION('',(0.,1.,0.));+#804 = PCURVE('',#734,#805);+#805 = DEFINITIONAL_REPRESENTATION('',(#806),#810);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(-0.36,-1.38));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(0.,-1.));+#810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#811 = PCURVE('',#70,#812);+#812 = DEFINITIONAL_REPRESENTATION('',(#813),#817);+#813 = LINE('',#814,#815);+#814 = CARTESIAN_POINT('',(5.03,4.615));+#815 = VECTOR('',#816,1.);+#816 = DIRECTION('',(0.,1.));+#817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#818 = ORIENTED_EDGE('',*,*,#819,.T.);+#819 = EDGE_CURVE('',#797,#820,#822,.T.);+#820 = VERTEX_POINT('',#821);+#821 = CARTESIAN_POINT('',(5.03,1.38,0.58));+#822 = SURFACE_CURVE('',#823,(#827,#834),.PCURVE_S1.);+#823 = LINE('',#824,#825);+#824 = CARTESIAN_POINT('',(5.03,1.38,0.));+#825 = VECTOR('',#826,1.);+#826 = DIRECTION('',(0.,0.,1.));+#827 = PCURVE('',#734,#828);+#828 = DEFINITIONAL_REPRESENTATION('',(#829),#833);+#829 = LINE('',#830,#831);+#830 = CARTESIAN_POINT('',(-0.36,-1.38));+#831 = VECTOR('',#832,1.);+#832 = DIRECTION('',(1.,0.));+#833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#834 = PCURVE('',#835,#840);+#835 = PLANE('',#836);+#836 = AXIS2_PLACEMENT_3D('',#837,#838,#839);+#837 = CARTESIAN_POINT('',(5.03,1.38,0.));+#838 = DIRECTION('',(0.,1.,0.));+#839 = DIRECTION('',(0.,0.,1.));+#840 = DEFINITIONAL_REPRESENTATION('',(#841),#845);+#841 = LINE('',#842,#843);+#842 = CARTESIAN_POINT('',(0.,0.));+#843 = VECTOR('',#844,1.);+#844 = DIRECTION('',(1.,0.));+#845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#846 = ORIENTED_EDGE('',*,*,#847,.T.);+#847 = EDGE_CURVE('',#820,#848,#850,.T.);+#848 = VERTEX_POINT('',#849);+#849 = CARTESIAN_POINT('',(5.03,2.224145903487,0.58));+#850 = SURFACE_CURVE('',#851,(#855,#862),.PCURVE_S1.);+#851 = LINE('',#852,#853);+#852 = CARTESIAN_POINT('',(5.03,1.38,0.58));+#853 = VECTOR('',#854,1.);+#854 = DIRECTION('',(0.,1.,0.));+#855 = PCURVE('',#734,#856);+#856 = DEFINITIONAL_REPRESENTATION('',(#857),#861);+#857 = LINE('',#858,#859);+#858 = CARTESIAN_POINT('',(0.22,-1.38));+#859 = VECTOR('',#860,1.);+#860 = DIRECTION('',(0.,-1.));+#861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#862 = PCURVE('',#126,#863);+#863 = DEFINITIONAL_REPRESENTATION('',(#864),#868);+#864 = LINE('',#865,#866);+#865 = CARTESIAN_POINT('',(5.03,3.615));+#866 = VECTOR('',#867,1.);+#867 = DIRECTION('',(0.,1.));+#868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#869 = ORIENTED_EDGE('',*,*,#870,.F.);+#870 = EDGE_CURVE('',#871,#848,#873,.T.);+#871 = VERTEX_POINT('',#872);+#872 = CARTESIAN_POINT('',(5.03,1.390224801966,2.11));+#873 = SURFACE_CURVE('',#874,(#879,#890),.PCURVE_S1.);+#874 = CIRCLE('',#875,2.235);+#875 = AXIS2_PLACEMENT_3D('',#876,#877,#878);+#876 = CARTESIAN_POINT('',(5.03,0.,0.36));+#877 = DIRECTION('',(-1.,0.,0.));+#878 = DIRECTION('',(0.,0.622024519895,0.782997762864));+#879 = PCURVE('',#734,#880);+#880 = DEFINITIONAL_REPRESENTATION('',(#881),#889);+#881 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#882,#883,#884,#885,#886,#887+,#888),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+    -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#882 = CARTESIAN_POINT('',(1.75,-1.390224801966));+#883 = CARTESIAN_POINT('',(-0.657939990947,-4.421313715211));+#884 = CARTESIAN_POINT('',(-2.078969995473,-0.82043205564));+#885 = CARTESIAN_POINT('',(-3.5,2.780449603931));+#886 = CARTESIAN_POINT('',(0.328969995473,2.210656857606));+#887 = CARTESIAN_POINT('',(4.157939990947,1.64086411128));+#888 = CARTESIAN_POINT('',(1.75,-1.390224801966));+#889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#890 = PCURVE('',#155,#891);+#891 = DEFINITIONAL_REPRESENTATION('',(#892),#896);+#892 = LINE('',#893,#894);+#893 = CARTESIAN_POINT('',(-7.182655976803,-5.03));+#894 = VECTOR('',#895,1.);+#895 = DIRECTION('',(1.,-0.));+#896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#897 = ORIENTED_EDGE('',*,*,#898,.F.);+#898 = EDGE_CURVE('',#899,#871,#901,.T.);+#899 = VERTEX_POINT('',#900);+#900 = CARTESIAN_POINT('',(5.03,-1.390224801966,2.11));+#901 = SURFACE_CURVE('',#902,(#906,#913),.PCURVE_S1.);+#902 = LINE('',#903,#904);+#903 = CARTESIAN_POINT('',(5.03,-3.235,2.11));+#904 = VECTOR('',#905,1.);+#905 = DIRECTION('',(0.,1.,0.));+#906 = PCURVE('',#734,#907);+#907 = DEFINITIONAL_REPRESENTATION('',(#908),#912);+#908 = LINE('',#909,#910);+#909 = CARTESIAN_POINT('',(1.75,3.235));+#910 = VECTOR('',#911,1.);+#911 = DIRECTION('',(0.,-1.));+#912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#913 = PCURVE('',#183,#914);+#914 = DEFINITIONAL_REPRESENTATION('',(#915),#919);+#915 = LINE('',#916,#917);+#916 = CARTESIAN_POINT('',(5.03,0.));+#917 = VECTOR('',#918,1.);+#918 = DIRECTION('',(0.,1.));+#919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#920 = ORIENTED_EDGE('',*,*,#921,.T.);+#921 = EDGE_CURVE('',#899,#922,#924,.T.);+#922 = VERTEX_POINT('',#923);+#923 = CARTESIAN_POINT('',(5.03,-2.224145903487,0.58));+#924 = SURFACE_CURVE('',#925,(#930,#937),.PCURVE_S1.);+#925 = CIRCLE('',#926,2.235);+#926 = AXIS2_PLACEMENT_3D('',#927,#928,#929);+#927 = CARTESIAN_POINT('',(5.03,0.,0.36));+#928 = DIRECTION('',(1.,0.,0.));+#929 = DIRECTION('',(0.,1.,0.));+#930 = PCURVE('',#734,#931);+#931 = DEFINITIONAL_REPRESENTATION('',(#932),#936);+#932 = CIRCLE('',#933,2.235);+#933 = AXIS2_PLACEMENT_2D('',#934,#935);+#934 = CARTESIAN_POINT('',(-1.665334536938E-16,-7.64787546163E-17));+#935 = DIRECTION('',(0.,-1.));+#936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#937 = PCURVE('',#212,#938);+#938 = DEFINITIONAL_REPRESENTATION('',(#939),#943);+#939 = LINE('',#940,#941);+#940 = CARTESIAN_POINT('',(-0.,-5.03));+#941 = VECTOR('',#942,1.);+#942 = DIRECTION('',(-1.,0.));+#943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#944 = ORIENTED_EDGE('',*,*,#945,.T.);+#945 = EDGE_CURVE('',#922,#719,#946,.T.);+#946 = SURFACE_CURVE('',#947,(#951,#958),.PCURVE_S1.);+#947 = LINE('',#948,#949);+#948 = CARTESIAN_POINT('',(5.03,-2.235,0.58));+#949 = VECTOR('',#950,1.);+#950 = DIRECTION('',(0.,1.,0.));+#951 = PCURVE('',#734,#952);+#952 = DEFINITIONAL_REPRESENTATION('',(#953),#957);+#953 = LINE('',#954,#955);+#954 = CARTESIAN_POINT('',(0.22,2.235));+#955 = VECTOR('',#956,1.);+#956 = DIRECTION('',(0.,-1.));+#957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#958 = PCURVE('',#240,#959);+#959 = DEFINITIONAL_REPRESENTATION('',(#960),#964);+#960 = LINE('',#961,#962);+#961 = CARTESIAN_POINT('',(5.03,0.));+#962 = VECTOR('',#963,1.);+#963 = DIRECTION('',(0.,1.));+#964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#965 = ORIENTED_EDGE('',*,*,#718,.F.);+#966 = ORIENTED_EDGE('',*,*,#967,.F.);+#967 = EDGE_CURVE('',#968,#696,#970,.T.);+#968 = VERTEX_POINT('',#969);+#969 = CARTESIAN_POINT('',(5.03,-1.7,0.));+#970 = SURFACE_CURVE('',#971,(#975,#982),.PCURVE_S1.);+#971 = LINE('',#972,#973);+#972 = CARTESIAN_POINT('',(5.03,-2.235,0.));+#973 = VECTOR('',#974,1.);+#974 = DIRECTION('',(0.,1.,0.));+#975 = PCURVE('',#734,#976);+#976 = DEFINITIONAL_REPRESENTATION('',(#977),#981);+#977 = LINE('',#978,#979);+#978 = CARTESIAN_POINT('',(-0.36,2.235));+#979 = VECTOR('',#980,1.);+#980 = DIRECTION('',(0.,-1.));+#981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#982 = PCURVE('',#296,#983);+#983 = DEFINITIONAL_REPRESENTATION('',(#984),#988);+#984 = LINE('',#985,#986);+#985 = CARTESIAN_POINT('',(5.03,1.));+#986 = VECTOR('',#987,1.);+#987 = DIRECTION('',(0.,1.));+#988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#989 = ORIENTED_EDGE('',*,*,#990,.F.);+#990 = EDGE_CURVE('',#991,#968,#993,.T.);+#991 = VERTEX_POINT('',#992);+#992 = CARTESIAN_POINT('',(5.03,-1.7,-1.1));+#993 = SURFACE_CURVE('',#994,(#998,#1005),.PCURVE_S1.);+#994 = LINE('',#995,#996);+#995 = CARTESIAN_POINT('',(5.03,-1.7,-1.4));+#996 = VECTOR('',#997,1.);+#997 = DIRECTION('',(0.,0.,1.));+#998 = PCURVE('',#734,#999);+#999 = DEFINITIONAL_REPRESENTATION('',(#1000),#1004);+#1000 = LINE('',#1001,#1002);+#1001 = CARTESIAN_POINT('',(-1.76,1.7));+#1002 = VECTOR('',#1003,1.);+#1003 = DIRECTION('',(1.,0.));+#1004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1005 = PCURVE('',#324,#1006);+#1006 = DEFINITIONAL_REPRESENTATION('',(#1007),#1011);+#1007 = LINE('',#1008,#1009);+#1008 = CARTESIAN_POINT('',(0.,5.03));+#1009 = VECTOR('',#1010,1.);+#1010 = DIRECTION('',(1.,0.));+#1011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1012 = ORIENTED_EDGE('',*,*,#1013,.T.);+#1013 = EDGE_CURVE('',#991,#1014,#1016,.T.);+#1014 = VERTEX_POINT('',#1015);+#1015 = CARTESIAN_POINT('',(5.03,-1.4,-1.4));+#1016 = SURFACE_CURVE('',#1017,(#1021,#1028),.PCURVE_S1.);+#1017 = LINE('',#1018,#1019);+#1018 = CARTESIAN_POINT('',(5.03,-1.55,-1.25));+#1019 = VECTOR('',#1020,1.);+#1020 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#1021 = PCURVE('',#734,#1022);+#1022 = DEFINITIONAL_REPRESENTATION('',(#1023),#1027);+#1023 = LINE('',#1024,#1025);+#1024 = CARTESIAN_POINT('',(-1.61,1.55));+#1025 = VECTOR('',#1026,1.);+#1026 = DIRECTION('',(-0.707106781187,-0.707106781187));+#1027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1028 = PCURVE('',#352,#1029);+#1029 = DEFINITIONAL_REPRESENTATION('',(#1030),#1034);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(-5.03,0.));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(-0.,1.));+#1034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1035 = ORIENTED_EDGE('',*,*,#1036,.T.);+#1036 = EDGE_CURVE('',#1014,#1037,#1039,.T.);+#1037 = VERTEX_POINT('',#1038);+#1038 = CARTESIAN_POINT('',(5.03,1.4,-1.4));+#1039 = SURFACE_CURVE('',#1040,(#1044,#1051),.PCURVE_S1.);+#1040 = LINE('',#1041,#1042);+#1041 = CARTESIAN_POINT('',(5.03,-1.7,-1.4));+#1042 = VECTOR('',#1043,1.);+#1043 = DIRECTION('',(0.,1.,0.));+#1044 = PCURVE('',#734,#1045);+#1045 = DEFINITIONAL_REPRESENTATION('',(#1046),#1050);+#1046 = LINE('',#1047,#1048);+#1047 = CARTESIAN_POINT('',(-1.76,1.7));+#1048 = VECTOR('',#1049,1.);+#1049 = DIRECTION('',(0.,-1.));+#1050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1051 = PCURVE('',#380,#1052);+#1052 = DEFINITIONAL_REPRESENTATION('',(#1053),#1057);+#1053 = LINE('',#1054,#1055);+#1054 = CARTESIAN_POINT('',(5.03,0.));+#1055 = VECTOR('',#1056,1.);+#1056 = DIRECTION('',(0.,1.));+#1057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1058 = ORIENTED_EDGE('',*,*,#1059,.F.);+#1059 = EDGE_CURVE('',#772,#1037,#1060,.T.);+#1060 = SURFACE_CURVE('',#1061,(#1065,#1072),.PCURVE_S1.);+#1061 = LINE('',#1062,#1063);+#1062 = CARTESIAN_POINT('',(5.03,0.7,-2.1));+#1063 = VECTOR('',#1064,1.);+#1064 = DIRECTION('',(0.,-0.707106781187,-0.707106781187));+#1065 = PCURVE('',#734,#1066);+#1066 = DEFINITIONAL_REPRESENTATION('',(#1067),#1071);+#1067 = LINE('',#1068,#1069);+#1068 = CARTESIAN_POINT('',(-2.46,-0.7));+#1069 = VECTOR('',#1070,1.);+#1070 = DIRECTION('',(-0.707106781187,0.707106781187));+#1071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1072 = PCURVE('',#408,#1073);+#1073 = DEFINITIONAL_REPRESENTATION('',(#1074),#1078);+#1074 = LINE('',#1075,#1076);+#1075 = CARTESIAN_POINT('',(-5.03,1.202081528017));+#1076 = VECTOR('',#1077,1.);+#1077 = DIRECTION('',(-0.,1.));+#1078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1079 = ADVANCED_FACE('',(#1080),#835,.F.);+#1080 = FACE_BOUND('',#1081,.F.);+#1081 = EDGE_LOOP('',(#1082,#1105,#1106,#1129));+#1082 = ORIENTED_EDGE('',*,*,#1083,.F.);+#1083 = EDGE_CURVE('',#797,#1084,#1086,.T.);+#1084 = VERTEX_POINT('',#1085);+#1085 = CARTESIAN_POINT('',(7.95,1.38,0.));+#1086 = SURFACE_CURVE('',#1087,(#1091,#1098),.PCURVE_S1.);+#1087 = LINE('',#1088,#1089);+#1088 = CARTESIAN_POINT('',(5.03,1.38,0.));+#1089 = VECTOR('',#1090,1.);+#1090 = DIRECTION('',(1.,0.,0.));+#1091 = PCURVE('',#835,#1092);+#1092 = DEFINITIONAL_REPRESENTATION('',(#1093),#1097);+#1093 = LINE('',#1094,#1095);+#1094 = CARTESIAN_POINT('',(0.,0.));+#1095 = VECTOR('',#1096,1.);+#1096 = DIRECTION('',(0.,1.));+#1097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1098 = PCURVE('',#70,#1099);+#1099 = DEFINITIONAL_REPRESENTATION('',(#1100),#1104);+#1100 = LINE('',#1101,#1102);+#1101 = CARTESIAN_POINT('',(5.03,4.615));+#1102 = VECTOR('',#1103,1.);+#1103 = DIRECTION('',(1.,0.));+#1104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1105 = ORIENTED_EDGE('',*,*,#819,.T.);+#1106 = ORIENTED_EDGE('',*,*,#1107,.T.);+#1107 = EDGE_CURVE('',#820,#1108,#1110,.T.);+#1108 = VERTEX_POINT('',#1109);+#1109 = CARTESIAN_POINT('',(7.95,1.38,0.58));+#1110 = SURFACE_CURVE('',#1111,(#1115,#1122),.PCURVE_S1.);+#1111 = LINE('',#1112,#1113);+#1112 = CARTESIAN_POINT('',(5.03,1.38,0.58));+#1113 = VECTOR('',#1114,1.);+#1114 = DIRECTION('',(1.,0.,0.));+#1115 = PCURVE('',#835,#1116);+#1116 = DEFINITIONAL_REPRESENTATION('',(#1117),#1121);+#1117 = LINE('',#1118,#1119);+#1118 = CARTESIAN_POINT('',(0.58,0.));+#1119 = VECTOR('',#1120,1.);+#1120 = DIRECTION('',(0.,1.));+#1121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1122 = PCURVE('',#126,#1123);+#1123 = DEFINITIONAL_REPRESENTATION('',(#1124),#1128);+#1124 = LINE('',#1125,#1126);+#1125 = CARTESIAN_POINT('',(5.03,3.615));+#1126 = VECTOR('',#1127,1.);+#1127 = DIRECTION('',(1.,0.));+#1128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1129 = ORIENTED_EDGE('',*,*,#1130,.F.);+#1130 = EDGE_CURVE('',#1084,#1108,#1131,.T.);+#1131 = SURFACE_CURVE('',#1132,(#1136,#1143),.PCURVE_S1.);+#1132 = LINE('',#1133,#1134);+#1133 = CARTESIAN_POINT('',(7.95,1.38,0.));+#1134 = VECTOR('',#1135,1.);+#1135 = DIRECTION('',(0.,0.,1.));+#1136 = PCURVE('',#835,#1137);+#1137 = DEFINITIONAL_REPRESENTATION('',(#1138),#1142);+#1138 = LINE('',#1139,#1140);+#1139 = CARTESIAN_POINT('',(0.,2.92));+#1140 = VECTOR('',#1141,1.);+#1141 = DIRECTION('',(1.,0.));+#1142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1143 = PCURVE('',#1144,#1149);+#1144 = PLANE('',#1145);+#1145 = AXIS2_PLACEMENT_3D('',#1146,#1147,#1148);+#1146 = CARTESIAN_POINT('',(7.95,1.38,0.));+#1147 = DIRECTION('',(1.,0.,0.));+#1148 = DIRECTION('',(0.,0.,1.));+#1149 = DEFINITIONAL_REPRESENTATION('',(#1150),#1154);+#1150 = LINE('',#1151,#1152);+#1151 = CARTESIAN_POINT('',(0.,0.));+#1152 = VECTOR('',#1153,1.);+#1153 = DIRECTION('',(1.,0.));+#1154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1155 = ADVANCED_FACE('',(#1156),#1144,.T.);+#1156 = FACE_BOUND('',#1157,.T.);+#1157 = EDGE_LOOP('',(#1158,#1159,#1182,#1205));+#1158 = ORIENTED_EDGE('',*,*,#1130,.F.);+#1159 = ORIENTED_EDGE('',*,*,#1160,.T.);+#1160 = EDGE_CURVE('',#1084,#1161,#1163,.T.);+#1161 = VERTEX_POINT('',#1162);+#1162 = CARTESIAN_POINT('',(7.95,2.235,0.));+#1163 = SURFACE_CURVE('',#1164,(#1168,#1175),.PCURVE_S1.);+#1164 = LINE('',#1165,#1166);+#1165 = CARTESIAN_POINT('',(7.95,1.38,0.));+#1166 = VECTOR('',#1167,1.);+#1167 = DIRECTION('',(0.,1.,0.));+#1168 = PCURVE('',#1144,#1169);+#1169 = DEFINITIONAL_REPRESENTATION('',(#1170),#1174);+#1170 = LINE('',#1171,#1172);+#1171 = CARTESIAN_POINT('',(0.,0.));+#1172 = VECTOR('',#1173,1.);+#1173 = DIRECTION('',(0.,-1.));+#1174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1175 = PCURVE('',#70,#1176);+#1176 = DEFINITIONAL_REPRESENTATION('',(#1177),#1181);+#1177 = LINE('',#1178,#1179);+#1178 = CARTESIAN_POINT('',(7.95,4.615));+#1179 = VECTOR('',#1180,1.);+#1180 = DIRECTION('',(0.,1.));+#1181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1182 = ORIENTED_EDGE('',*,*,#1183,.T.);+#1183 = EDGE_CURVE('',#1161,#1184,#1186,.T.);+#1184 = VERTEX_POINT('',#1185);+#1185 = CARTESIAN_POINT('',(7.95,2.235,0.58));+#1186 = SURFACE_CURVE('',#1187,(#1191,#1198),.PCURVE_S1.);+#1187 = LINE('',#1188,#1189);+#1188 = CARTESIAN_POINT('',(7.95,2.235,0.));+#1189 = VECTOR('',#1190,1.);+#1190 = DIRECTION('',(0.,0.,1.));+#1191 = PCURVE('',#1144,#1192);+#1192 = DEFINITIONAL_REPRESENTATION('',(#1193),#1197);+#1193 = LINE('',#1194,#1195);+#1194 = CARTESIAN_POINT('',(0.,-0.855));+#1195 = VECTOR('',#1196,1.);+#1196 = DIRECTION('',(1.,0.));+#1197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1198 = PCURVE('',#98,#1199);+#1199 = DEFINITIONAL_REPRESENTATION('',(#1200),#1204);+#1200 = LINE('',#1201,#1202);+#1201 = CARTESIAN_POINT('',(0.,7.95));+#1202 = VECTOR('',#1203,1.);+#1203 = DIRECTION('',(1.,0.));+#1204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1205 = ORIENTED_EDGE('',*,*,#1206,.F.);+#1206 = EDGE_CURVE('',#1108,#1184,#1207,.T.);+#1207 = SURFACE_CURVE('',#1208,(#1212,#1219),.PCURVE_S1.);+#1208 = LINE('',#1209,#1210);+#1209 = CARTESIAN_POINT('',(7.95,1.38,0.58));+#1210 = VECTOR('',#1211,1.);+#1211 = DIRECTION('',(0.,1.,0.));+#1212 = PCURVE('',#1144,#1213);+#1213 = DEFINITIONAL_REPRESENTATION('',(#1214),#1218);+#1214 = LINE('',#1215,#1216);+#1215 = CARTESIAN_POINT('',(0.58,0.));+#1216 = VECTOR('',#1217,1.);+#1217 = DIRECTION('',(0.,-1.));+#1218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1219 = PCURVE('',#126,#1220);+#1220 = DEFINITIONAL_REPRESENTATION('',(#1221),#1225);+#1221 = LINE('',#1222,#1223);+#1222 = CARTESIAN_POINT('',(7.95,3.615));+#1223 = VECTOR('',#1224,1.);+#1224 = DIRECTION('',(0.,1.));+#1225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1226 = ADVANCED_FACE('',(#1227),#296,.F.);+#1227 = FACE_BOUND('',#1228,.F.);+#1228 = EDGE_LOOP('',(#1229,#1230,#1231,#1232,#1233,#1253));+#1229 = ORIENTED_EDGE('',*,*,#595,.F.);+#1230 = ORIENTED_EDGE('',*,*,#620,.T.);+#1231 = ORIENTED_EDGE('',*,*,#695,.F.);+#1232 = ORIENTED_EDGE('',*,*,#967,.F.);+#1233 = ORIENTED_EDGE('',*,*,#1234,.T.);+#1234 = EDGE_CURVE('',#968,#281,#1235,.T.);+#1235 = SURFACE_CURVE('',#1236,(#1240,#1247),.PCURVE_S1.);+#1236 = LINE('',#1237,#1238);+#1237 = CARTESIAN_POINT('',(0.,-1.7,0.));+#1238 = VECTOR('',#1239,1.);+#1239 = DIRECTION('',(-1.,0.,0.));+#1240 = PCURVE('',#296,#1241);+#1241 = DEFINITIONAL_REPRESENTATION('',(#1242),#1246);+#1242 = LINE('',#1243,#1244);+#1243 = CARTESIAN_POINT('',(0.,1.535));+#1244 = VECTOR('',#1245,1.);+#1245 = DIRECTION('',(-1.,0.));+#1246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1247 = PCURVE('',#324,#1248);+#1248 = DEFINITIONAL_REPRESENTATION('',(#1249),#1252);+#1249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1250,#1251),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.03,0.),.PIECEWISE_BEZIER_KNOTS.);+#1250 = CARTESIAN_POINT('',(1.4,5.03));+#1251 = CARTESIAN_POINT('',(1.4,0.));+#1252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1253 = ORIENTED_EDGE('',*,*,#280,.T.);+#1254 = ADVANCED_FACE('',(#1255),#240,.T.);+#1255 = FACE_BOUND('',#1256,.T.);+#1256 = EDGE_LOOP('',(#1257,#1258,#1259,#1260,#1261,#1262));+#1257 = ORIENTED_EDGE('',*,*,#224,.F.);+#1258 = ORIENTED_EDGE('',*,*,#544,.T.);+#1259 = ORIENTED_EDGE('',*,*,#671,.T.);+#1260 = ORIENTED_EDGE('',*,*,#746,.F.);+#1261 = ORIENTED_EDGE('',*,*,#945,.F.);+#1262 = ORIENTED_EDGE('',*,*,#1263,.T.);+#1263 = EDGE_CURVE('',#922,#196,#1264,.T.);+#1264 = SURFACE_CURVE('',#1265,(#1269,#1276),.PCURVE_S1.);+#1265 = LINE('',#1266,#1267);+#1266 = CARTESIAN_POINT('',(0.,-2.224145903487,0.58));+#1267 = VECTOR('',#1268,1.);+#1268 = DIRECTION('',(-1.,-0.,-0.));+#1269 = PCURVE('',#240,#1270);+#1270 = DEFINITIONAL_REPRESENTATION('',(#1271),#1275);+#1271 = LINE('',#1272,#1273);+#1272 = CARTESIAN_POINT('',(0.,1.085409651255E-02));+#1273 = VECTOR('',#1274,1.);+#1274 = DIRECTION('',(-1.,0.));+#1275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1276 = PCURVE('',#212,#1277);+#1277 = DEFINITIONAL_REPRESENTATION('',(#1278),#1281);+#1278 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1279,#1280),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.0300006,6.E-07),.PIECEWISE_BEZIER_KNOTS.);+#1279 = CARTESIAN_POINT('',(-3.04299899334,-5.0300006));+#1280 = CARTESIAN_POINT('',(-3.04299899334,6.E-07));+#1281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1282 = ADVANCED_FACE('',(#1283),#324,.F.);+#1283 = FACE_BOUND('',#1284,.F.);+#1284 = EDGE_LOOP('',(#1285,#1286,#1307,#1308));+#1285 = ORIENTED_EDGE('',*,*,#990,.F.);+#1286 = ORIENTED_EDGE('',*,*,#1287,.F.);+#1287 = EDGE_CURVE('',#309,#991,#1288,.T.);+#1288 = SURFACE_CURVE('',#1289,(#1293,#1300),.PCURVE_S1.);+#1289 = LINE('',#1290,#1291);+#1290 = CARTESIAN_POINT('',(0.,-1.7,-1.1));+#1291 = VECTOR('',#1292,1.);+#1292 = DIRECTION('',(1.,0.,0.));+#1293 = PCURVE('',#324,#1294);+#1294 = DEFINITIONAL_REPRESENTATION('',(#1295),#1299);+#1295 = LINE('',#1296,#1297);+#1296 = CARTESIAN_POINT('',(0.3,0.));+#1297 = VECTOR('',#1298,1.);+#1298 = DIRECTION('',(0.,1.));+#1299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1300 = PCURVE('',#352,#1301);+#1301 = DEFINITIONAL_REPRESENTATION('',(#1302),#1306);+#1302 = LINE('',#1303,#1304);+#1303 = CARTESIAN_POINT('',(-0.,-0.212132034356));+#1304 = VECTOR('',#1305,1.);+#1305 = DIRECTION('',(-1.,0.));+#1306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1307 = ORIENTED_EDGE('',*,*,#308,.T.);+#1308 = ORIENTED_EDGE('',*,*,#1234,.F.);+#1309 = ADVANCED_FACE('',(#1310),#212,.T.);+#1310 = FACE_BOUND('',#1311,.F.);+#1311 = EDGE_LOOP('',(#1312,#1313,#1332,#1333));+#1312 = ORIENTED_EDGE('',*,*,#195,.F.);+#1313 = ORIENTED_EDGE('',*,*,#1314,.F.);+#1314 = EDGE_CURVE('',#899,#168,#1315,.T.);+#1315 = SURFACE_CURVE('',#1316,(#1320,#1326),.PCURVE_S1.);+#1316 = LINE('',#1317,#1318);+#1317 = CARTESIAN_POINT('',(0.,-1.390224801965,2.11));+#1318 = VECTOR('',#1319,1.);+#1319 = DIRECTION('',(-1.,-0.,-0.));+#1320 = PCURVE('',#212,#1321);+#1321 = DEFINITIONAL_REPRESENTATION('',(#1322),#1325);+#1322 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1323,#1324),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.0300006,6.E-07),.PIECEWISE_BEZIER_KNOTS.);+#1323 = CARTESIAN_POINT('',(-2.242121983967,-5.0300006));+#1324 = CARTESIAN_POINT('',(-2.242121983967,6.E-07));+#1325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1326 = PCURVE('',#183,#1327);+#1327 = DEFINITIONAL_REPRESENTATION('',(#1328),#1331);+#1328 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1329,#1330),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.0300006,6.E-07),.PIECEWISE_BEZIER_KNOTS.);+#1329 = CARTESIAN_POINT('',(5.0300006,1.844775198035));+#1330 = CARTESIAN_POINT('',(-6.E-07,1.844775198035));+#1331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1332 = ORIENTED_EDGE('',*,*,#921,.T.);+#1333 = ORIENTED_EDGE('',*,*,#1263,.T.);+#1334 = ADVANCED_FACE('',(#1335),#352,.T.);+#1335 = FACE_BOUND('',#1336,.F.);+#1336 = EDGE_LOOP('',(#1337,#1338,#1339,#1340));+#1337 = ORIENTED_EDGE('',*,*,#336,.F.);+#1338 = ORIENTED_EDGE('',*,*,#1287,.T.);+#1339 = ORIENTED_EDGE('',*,*,#1013,.T.);+#1340 = ORIENTED_EDGE('',*,*,#1341,.F.);+#1341 = EDGE_CURVE('',#337,#1014,#1342,.T.);+#1342 = SURFACE_CURVE('',#1343,(#1347,#1354),.PCURVE_S1.);+#1343 = LINE('',#1344,#1345);+#1344 = CARTESIAN_POINT('',(0.,-1.4,-1.4));+#1345 = VECTOR('',#1346,1.);+#1346 = DIRECTION('',(1.,0.,0.));+#1347 = PCURVE('',#352,#1348);+#1348 = DEFINITIONAL_REPRESENTATION('',(#1349),#1353);+#1349 = LINE('',#1350,#1351);+#1350 = CARTESIAN_POINT('',(-0.,0.212132034356));+#1351 = VECTOR('',#1352,1.);+#1352 = DIRECTION('',(-1.,0.));+#1353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1354 = PCURVE('',#380,#1355);+#1355 = DEFINITIONAL_REPRESENTATION('',(#1356),#1360);+#1356 = LINE('',#1357,#1358);+#1357 = CARTESIAN_POINT('',(0.,0.3));+#1358 = VECTOR('',#1359,1.);+#1359 = DIRECTION('',(1.,0.));+#1360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1361 = ADVANCED_FACE('',(#1362),#183,.T.);+#1362 = FACE_BOUND('',#1363,.T.);+#1363 = EDGE_LOOP('',(#1364,#1365,#1366,#1367));+#1364 = ORIENTED_EDGE('',*,*,#167,.F.);+#1365 = ORIENTED_EDGE('',*,*,#1314,.F.);+#1366 = ORIENTED_EDGE('',*,*,#898,.T.);+#1367 = ORIENTED_EDGE('',*,*,#1368,.T.);+#1368 = EDGE_CURVE('',#871,#139,#1369,.T.);+#1369 = SURFACE_CURVE('',#1370,(#1374,#1380),.PCURVE_S1.);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(0.,1.390224801965,2.11));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(-1.,-0.,-0.));+#1374 = PCURVE('',#183,#1375);+#1375 = DEFINITIONAL_REPRESENTATION('',(#1376),#1379);+#1376 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1377,#1378),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.0300006,6.E-07),.PIECEWISE_BEZIER_KNOTS.);+#1377 = CARTESIAN_POINT('',(5.0300006,4.625224801965));+#1378 = CARTESIAN_POINT('',(-6.E-07,4.625224801965));+#1379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1380 = PCURVE('',#155,#1381);+#1381 = DEFINITIONAL_REPRESENTATION('',(#1382),#1385);+#1382 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1383,#1384),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.03,0.),.PIECEWISE_BEZIER_KNOTS.);+#1383 = CARTESIAN_POINT('',(-7.182655976803,-5.03));+#1384 = CARTESIAN_POINT('',(-7.182655976803,0.));+#1385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1386 = ADVANCED_FACE('',(#1387),#380,.F.);+#1387 = FACE_BOUND('',#1388,.F.);+#1388 = EDGE_LOOP('',(#1389,#1390,#1391,#1392));+#1389 = ORIENTED_EDGE('',*,*,#364,.F.);+#1390 = ORIENTED_EDGE('',*,*,#1341,.T.);+#1391 = ORIENTED_EDGE('',*,*,#1036,.T.);+#1392 = ORIENTED_EDGE('',*,*,#1393,.F.);+#1393 = EDGE_CURVE('',#365,#1037,#1394,.T.);+#1394 = SURFACE_CURVE('',#1395,(#1399,#1406),.PCURVE_S1.);+#1395 = LINE('',#1396,#1397);+#1396 = CARTESIAN_POINT('',(0.,1.4,-1.4));+#1397 = VECTOR('',#1398,1.);+#1398 = DIRECTION('',(1.,0.,0.));+#1399 = PCURVE('',#380,#1400);+#1400 = DEFINITIONAL_REPRESENTATION('',(#1401),#1405);+#1401 = LINE('',#1402,#1403);+#1402 = CARTESIAN_POINT('',(0.,3.1));+#1403 = VECTOR('',#1404,1.);+#1404 = DIRECTION('',(1.,0.));+#1405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1406 = PCURVE('',#408,#1407);+#1407 = DEFINITIONAL_REPRESENTATION('',(#1408),#1412);+#1408 = LINE('',#1409,#1410);+#1409 = CARTESIAN_POINT('',(-0.,0.212132034356));+#1410 = VECTOR('',#1411,1.);+#1411 = DIRECTION('',(-1.,0.));+#1412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1413 = ADVANCED_FACE('',(#1414),#155,.T.);+#1414 = FACE_BOUND('',#1415,.F.);+#1415 = EDGE_LOOP('',(#1416,#1417,#1437,#1438));+#1416 = ORIENTED_EDGE('',*,*,#138,.F.);+#1417 = ORIENTED_EDGE('',*,*,#1418,.F.);+#1418 = EDGE_CURVE('',#848,#111,#1419,.T.);+#1419 = SURFACE_CURVE('',#1420,(#1424,#1430),.PCURVE_S1.);+#1420 = LINE('',#1421,#1422);+#1421 = CARTESIAN_POINT('',(0.,2.224145903487,0.58));+#1422 = VECTOR('',#1423,1.);+#1423 = DIRECTION('',(-1.,-0.,-0.));+#1424 = PCURVE('',#155,#1425);+#1425 = DEFINITIONAL_REPRESENTATION('',(#1426),#1429);+#1426 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1427,#1428),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.0300006,6.E-07),.PIECEWISE_BEZIER_KNOTS.);+#1427 = CARTESIAN_POINT('',(-6.38177896743,-5.0300006));+#1428 = CARTESIAN_POINT('',(-6.38177896743,6.E-07));+#1429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1430 = PCURVE('',#126,#1431);+#1431 = DEFINITIONAL_REPRESENTATION('',(#1432),#1436);+#1432 = LINE('',#1433,#1434);+#1433 = CARTESIAN_POINT('',(0.,4.459145903487));+#1434 = VECTOR('',#1435,1.);+#1435 = DIRECTION('',(-1.,0.));+#1436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1437 = ORIENTED_EDGE('',*,*,#870,.F.);+#1438 = ORIENTED_EDGE('',*,*,#1368,.T.);+#1439 = ADVANCED_FACE('',(#1440),#408,.F.);+#1440 = FACE_BOUND('',#1441,.T.);+#1441 = EDGE_LOOP('',(#1442,#1443,#1464,#1465));+#1442 = ORIENTED_EDGE('',*,*,#392,.F.);+#1443 = ORIENTED_EDGE('',*,*,#1444,.T.);+#1444 = EDGE_CURVE('',#393,#772,#1445,.T.);+#1445 = SURFACE_CURVE('',#1446,(#1450,#1457),.PCURVE_S1.);+#1446 = LINE('',#1447,#1448);+#1447 = CARTESIAN_POINT('',(0.,1.7,-1.1));+#1448 = VECTOR('',#1449,1.);+#1449 = DIRECTION('',(1.,0.,0.));+#1450 = PCURVE('',#408,#1451);+#1451 = DEFINITIONAL_REPRESENTATION('',(#1452),#1456);+#1452 = LINE('',#1453,#1454);+#1453 = CARTESIAN_POINT('',(-0.,-0.212132034356));+#1454 = VECTOR('',#1455,1.);+#1455 = DIRECTION('',(-1.,0.));+#1456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1457 = PCURVE('',#434,#1458);+#1458 = DEFINITIONAL_REPRESENTATION('',(#1459),#1463);+#1459 = LINE('',#1460,#1461);+#1460 = CARTESIAN_POINT('',(0.3,0.));+#1461 = VECTOR('',#1462,1.);+#1462 = DIRECTION('',(0.,1.));+#1463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1464 = ORIENTED_EDGE('',*,*,#1059,.T.);+#1465 = ORIENTED_EDGE('',*,*,#1393,.F.);+#1466 = ADVANCED_FACE('',(#1467),#126,.T.);+#1467 = FACE_BOUND('',#1468,.T.);+#1468 = EDGE_LOOP('',(#1469,#1470,#1471,#1472,#1473,#1474));+#1469 = ORIENTED_EDGE('',*,*,#110,.F.);+#1470 = ORIENTED_EDGE('',*,*,#1418,.F.);+#1471 = ORIENTED_EDGE('',*,*,#847,.F.);+#1472 = ORIENTED_EDGE('',*,*,#1107,.T.);+#1473 = ORIENTED_EDGE('',*,*,#1206,.T.);+#1474 = ORIENTED_EDGE('',*,*,#1475,.F.);+#1475 = EDGE_CURVE('',#83,#1184,#1476,.T.);+#1476 = SURFACE_CURVE('',#1477,(#1481,#1488),.PCURVE_S1.);+#1477 = LINE('',#1478,#1479);+#1478 = CARTESIAN_POINT('',(0.,2.235,0.58));+#1479 = VECTOR('',#1480,1.);+#1480 = DIRECTION('',(1.,0.,0.));+#1481 = PCURVE('',#126,#1482);+#1482 = DEFINITIONAL_REPRESENTATION('',(#1483),#1487);+#1483 = LINE('',#1484,#1485);+#1484 = CARTESIAN_POINT('',(0.,4.47));+#1485 = VECTOR('',#1486,1.);+#1486 = DIRECTION('',(1.,0.));+#1487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1488 = PCURVE('',#98,#1489);+#1489 = DEFINITIONAL_REPRESENTATION('',(#1490),#1494);+#1490 = LINE('',#1491,#1492);+#1491 = CARTESIAN_POINT('',(0.58,0.));+#1492 = VECTOR('',#1493,1.);+#1493 = DIRECTION('',(0.,1.));+#1494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1495 = ADVANCED_FACE('',(#1496),#434,.T.);+#1496 = FACE_BOUND('',#1497,.T.);+#1497 = EDGE_LOOP('',(#1498,#1499,#1500,#1501));+#1498 = ORIENTED_EDGE('',*,*,#771,.F.);+#1499 = ORIENTED_EDGE('',*,*,#1444,.F.);+#1500 = ORIENTED_EDGE('',*,*,#420,.T.);+#1501 = ORIENTED_EDGE('',*,*,#1502,.F.);+#1502 = EDGE_CURVE('',#774,#50,#1503,.T.);+#1503 = SURFACE_CURVE('',#1504,(#1508,#1514),.PCURVE_S1.);+#1504 = LINE('',#1505,#1506);+#1505 = CARTESIAN_POINT('',(0.,1.7,0.));+#1506 = VECTOR('',#1507,1.);+#1507 = DIRECTION('',(-1.,0.,0.));+#1508 = PCURVE('',#434,#1509);+#1509 = DEFINITIONAL_REPRESENTATION('',(#1510),#1513);+#1510 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1511,#1512),.UNSPECIFIED.,.F.,+  .F.,(2,2),(-5.03,0.),.PIECEWISE_BEZIER_KNOTS.);+#1511 = CARTESIAN_POINT('',(1.4,5.03));+#1512 = CARTESIAN_POINT('',(1.4,0.));+#1513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1514 = PCURVE('',#70,#1515);+#1515 = DEFINITIONAL_REPRESENTATION('',(#1516),#1520);+#1516 = LINE('',#1517,#1518);+#1517 = CARTESIAN_POINT('',(0.,4.935));+#1518 = VECTOR('',#1519,1.);+#1519 = DIRECTION('',(-1.,0.));+#1520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1521 = ADVANCED_FACE('',(#1522),#98,.T.);+#1522 = FACE_BOUND('',#1523,.T.);+#1523 = EDGE_LOOP('',(#1524,#1545,#1546,#1547));+#1524 = ORIENTED_EDGE('',*,*,#1525,.F.);+#1525 = EDGE_CURVE('',#48,#1161,#1526,.T.);+#1526 = SURFACE_CURVE('',#1527,(#1531,#1538),.PCURVE_S1.);+#1527 = LINE('',#1528,#1529);+#1528 = CARTESIAN_POINT('',(0.,2.235,0.));+#1529 = VECTOR('',#1530,1.);+#1530 = DIRECTION('',(1.,0.,0.));+#1531 = PCURVE('',#98,#1532);+#1532 = DEFINITIONAL_REPRESENTATION('',(#1533),#1537);+#1533 = LINE('',#1534,#1535);+#1534 = CARTESIAN_POINT('',(0.,0.));+#1535 = VECTOR('',#1536,1.);+#1536 = DIRECTION('',(0.,1.));+#1537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1538 = PCURVE('',#70,#1539);+#1539 = DEFINITIONAL_REPRESENTATION('',(#1540),#1544);+#1540 = LINE('',#1541,#1542);+#1541 = CARTESIAN_POINT('',(0.,5.47));+#1542 = VECTOR('',#1543,1.);+#1543 = DIRECTION('',(1.,0.));+#1544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1545 = ORIENTED_EDGE('',*,*,#82,.F.);+#1546 = ORIENTED_EDGE('',*,*,#1475,.T.);+#1547 = ORIENTED_EDGE('',*,*,#1183,.F.);+#1548 = ADVANCED_FACE('',(#1549),#70,.F.);+#1549 = FACE_BOUND('',#1550,.F.);+#1550 = EDGE_LOOP('',(#1551,#1552,#1553,#1554,#1555,#1556));+#1551 = ORIENTED_EDGE('',*,*,#1502,.F.);+#1552 = ORIENTED_EDGE('',*,*,#796,.F.);+#1553 = ORIENTED_EDGE('',*,*,#1083,.T.);+#1554 = ORIENTED_EDGE('',*,*,#1160,.T.);+#1555 = ORIENTED_EDGE('',*,*,#1525,.F.);+#1556 = ORIENTED_EDGE('',*,*,#47,.T.);+#1557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1561)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1558,#1559,#1560)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#1558 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#1559 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#1560 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#1561 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-05),#1558,+  'distance_accuracy_value','confusion accuracy');+#1562 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1563,#1565);+#1563 = ( REPRESENTATION_RELATIONSHIP('','',#40,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1564) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#1564 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#1565 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #1566);+#1566 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','body','',#5,#35,$);+#1567 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#37));+#1568 = SHAPE_DEFINITION_REPRESENTATION(#1569,#1575);+#1569 = PRODUCT_DEFINITION_SHAPE('','',#1570);+#1570 = PRODUCT_DEFINITION('design','',#1571,#1574);+#1571 = PRODUCT_DEFINITION_FORMATION('','',#1572);+#1572 = PRODUCT('insulator','insulator','',(#1573));+#1573 = PRODUCT_CONTEXT('',#2,'mechanical');+#1574 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#1575 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#1576),#1758);+#1576 = MANIFOLD_SOLID_BREP('',#1577);+#1577 = CLOSED_SHELL('',(#1578,#1666,#1744,#1751));+#1578 = ADVANCED_FACE('',(#1579),#1593,.T.);+#1579 = FACE_BOUND('',#1580,.F.);+#1580 = EDGE_LOOP('',(#1581,#1611,#1638,#1639));+#1581 = ORIENTED_EDGE('',*,*,#1582,.T.);+#1582 = EDGE_CURVE('',#1583,#1585,#1587,.T.);+#1583 = VERTEX_POINT('',#1584);+#1584 = CARTESIAN_POINT('',(0.99,1.425,0.36));+#1585 = VERTEX_POINT('',#1586);+#1586 = CARTESIAN_POINT('',(1.8,1.425,0.36));+#1587 = SEAM_CURVE('',#1588,(#1592,#1604),.PCURVE_S1.);+#1588 = LINE('',#1589,#1590);+#1589 = CARTESIAN_POINT('',(0.99,1.425,0.36));+#1590 = VECTOR('',#1591,1.);+#1591 = DIRECTION('',(1.,0.,0.));+#1592 = PCURVE('',#1593,#1598);+#1593 = CYLINDRICAL_SURFACE('',#1594,1.425);+#1594 = AXIS2_PLACEMENT_3D('',#1595,#1596,#1597);+#1595 = CARTESIAN_POINT('',(0.99,0.,0.36));+#1596 = DIRECTION('',(-1.,-0.,-0.));+#1597 = DIRECTION('',(0.,1.,0.));+#1598 = DEFINITIONAL_REPRESENTATION('',(#1599),#1603);+#1599 = LINE('',#1600,#1601);+#1600 = CARTESIAN_POINT('',(-0.,0.));+#1601 = VECTOR('',#1602,1.);+#1602 = DIRECTION('',(-0.,-1.));+#1603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1604 = PCURVE('',#1593,#1605);+#1605 = DEFINITIONAL_REPRESENTATION('',(#1606),#1610);+#1606 = LINE('',#1607,#1608);+#1607 = CARTESIAN_POINT('',(-6.28318530718,0.));+#1608 = VECTOR('',#1609,1.);+#1609 = DIRECTION('',(-0.,-1.));+#1610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1611 = ORIENTED_EDGE('',*,*,#1612,.T.);+#1612 = EDGE_CURVE('',#1585,#1585,#1613,.T.);+#1613 = SURFACE_CURVE('',#1614,(#1619,#1626),.PCURVE_S1.);+#1614 = CIRCLE('',#1615,1.425);+#1615 = AXIS2_PLACEMENT_3D('',#1616,#1617,#1618);+#1616 = CARTESIAN_POINT('',(1.8,0.,0.36));+#1617 = DIRECTION('',(1.,0.,0.));+#1618 = DIRECTION('',(0.,1.,0.));+#1619 = PCURVE('',#1593,#1620);+#1620 = DEFINITIONAL_REPRESENTATION('',(#1621),#1625);+#1621 = LINE('',#1622,#1623);+#1622 = CARTESIAN_POINT('',(-0.,-0.81));+#1623 = VECTOR('',#1624,1.);+#1624 = DIRECTION('',(-1.,0.));+#1625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1626 = PCURVE('',#1627,#1632);+#1627 = PLANE('',#1628);+#1628 = AXIS2_PLACEMENT_3D('',#1629,#1630,#1631);+#1629 = CARTESIAN_POINT('',(1.8,-8.996316661444E-17,0.36));+#1630 = DIRECTION('',(1.,0.,0.));+#1631 = DIRECTION('',(-0.,0.,1.));+#1632 = DEFINITIONAL_REPRESENTATION('',(#1633),#1637);+#1633 = CIRCLE('',#1634,1.425);+#1634 = AXIS2_PLACEMENT_2D('',#1635,#1636);+#1635 = CARTESIAN_POINT('',(-1.110223024625E-16,-8.996316661444E-17));+#1636 = DIRECTION('',(0.,-1.));+#1637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1638 = ORIENTED_EDGE('',*,*,#1582,.F.);+#1639 = ORIENTED_EDGE('',*,*,#1640,.F.);+#1640 = EDGE_CURVE('',#1583,#1583,#1641,.T.);+#1641 = SURFACE_CURVE('',#1642,(#1647,#1654),.PCURVE_S1.);+#1642 = CIRCLE('',#1643,1.425);+#1643 = AXIS2_PLACEMENT_3D('',#1644,#1645,#1646);+#1644 = CARTESIAN_POINT('',(0.99,0.,0.36));+#1645 = DIRECTION('',(1.,0.,0.));+#1646 = DIRECTION('',(0.,1.,0.));+#1647 = PCURVE('',#1593,#1648);+#1648 = DEFINITIONAL_REPRESENTATION('',(#1649),#1653);+#1649 = LINE('',#1650,#1651);+#1650 = CARTESIAN_POINT('',(-0.,0.));+#1651 = VECTOR('',#1652,1.);+#1652 = DIRECTION('',(-1.,0.));+#1653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1654 = PCURVE('',#1655,#1660);+#1655 = PLANE('',#1656);+#1656 = AXIS2_PLACEMENT_3D('',#1657,#1658,#1659);+#1657 = CARTESIAN_POINT('',(0.99,-8.996316661444E-17,0.36));+#1658 = DIRECTION('',(1.,0.,0.));+#1659 = DIRECTION('',(-0.,0.,1.));+#1660 = DEFINITIONAL_REPRESENTATION('',(#1661),#1665);+#1661 = CIRCLE('',#1662,1.425);+#1662 = AXIS2_PLACEMENT_2D('',#1663,#1664);+#1663 = CARTESIAN_POINT('',(-1.110223024625E-16,-8.996316661444E-17));+#1664 = DIRECTION('',(0.,-1.));+#1665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1666 = ADVANCED_FACE('',(#1667),#1681,.F.);+#1667 = FACE_BOUND('',#1668,.T.);+#1668 = EDGE_LOOP('',(#1669,#1699,#1721,#1722));+#1669 = ORIENTED_EDGE('',*,*,#1670,.T.);+#1670 = EDGE_CURVE('',#1671,#1673,#1675,.T.);+#1671 = VERTEX_POINT('',#1672);+#1672 = CARTESIAN_POINT('',(0.99,0.275,0.36));+#1673 = VERTEX_POINT('',#1674);+#1674 = CARTESIAN_POINT('',(1.8,0.275,0.36));+#1675 = SEAM_CURVE('',#1676,(#1680,#1692),.PCURVE_S1.);+#1676 = LINE('',#1677,#1678);+#1677 = CARTESIAN_POINT('',(0.99,0.275,0.36));+#1678 = VECTOR('',#1679,1.);+#1679 = DIRECTION('',(1.,0.,0.));+#1680 = PCURVE('',#1681,#1686);+#1681 = CYLINDRICAL_SURFACE('',#1682,0.275);+#1682 = AXIS2_PLACEMENT_3D('',#1683,#1684,#1685);+#1683 = CARTESIAN_POINT('',(0.99,6.817158923137E-15,0.36));+#1684 = DIRECTION('',(-1.,-0.,-0.));+#1685 = DIRECTION('',(0.,1.,0.));+#1686 = DEFINITIONAL_REPRESENTATION('',(#1687),#1691);+#1687 = LINE('',#1688,#1689);+#1688 = CARTESIAN_POINT('',(-0.,0.));+#1689 = VECTOR('',#1690,1.);+#1690 = DIRECTION('',(-0.,-1.));+#1691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1692 = PCURVE('',#1681,#1693);+#1693 = DEFINITIONAL_REPRESENTATION('',(#1694),#1698);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(-6.28318530718,0.));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(-0.,-1.));+#1698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1699 = ORIENTED_EDGE('',*,*,#1700,.T.);+#1700 = EDGE_CURVE('',#1673,#1673,#1701,.T.);+#1701 = SURFACE_CURVE('',#1702,(#1707,#1714),.PCURVE_S1.);+#1702 = CIRCLE('',#1703,0.275);+#1703 = AXIS2_PLACEMENT_3D('',#1704,#1705,#1706);+#1704 = CARTESIAN_POINT('',(1.8,6.817158923137E-15,0.36));+#1705 = DIRECTION('',(1.,0.,0.));+#1706 = DIRECTION('',(0.,1.,0.));+#1707 = PCURVE('',#1681,#1708);+#1708 = DEFINITIONAL_REPRESENTATION('',(#1709),#1713);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-0.,-0.81));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(-1.,0.));+#1713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1714 = PCURVE('',#1627,#1715);+#1715 = DEFINITIONAL_REPRESENTATION('',(#1716),#1720);+#1716 = CIRCLE('',#1717,0.275);+#1717 = AXIS2_PLACEMENT_2D('',#1718,#1719);+#1718 = CARTESIAN_POINT('',(5.551115123126E-17,-6.907122089751E-15));+#1719 = DIRECTION('',(0.,-1.));+#1720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1721 = ORIENTED_EDGE('',*,*,#1670,.F.);+#1722 = ORIENTED_EDGE('',*,*,#1723,.F.);+#1723 = EDGE_CURVE('',#1671,#1671,#1724,.T.);+#1724 = SURFACE_CURVE('',#1725,(#1730,#1737),.PCURVE_S1.);+#1725 = CIRCLE('',#1726,0.275);+#1726 = AXIS2_PLACEMENT_3D('',#1727,#1728,#1729);+#1727 = CARTESIAN_POINT('',(0.99,6.817158923137E-15,0.36));+#1728 = DIRECTION('',(1.,0.,0.));+#1729 = DIRECTION('',(0.,1.,0.));+#1730 = PCURVE('',#1681,#1731);+#1731 = DEFINITIONAL_REPRESENTATION('',(#1732),#1736);+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-0.,0.));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(-1.,0.));+#1736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1737 = PCURVE('',#1655,#1738);+#1738 = DEFINITIONAL_REPRESENTATION('',(#1739),#1743);+#1739 = CIRCLE('',#1740,0.275);+#1740 = AXIS2_PLACEMENT_2D('',#1741,#1742);+#1741 = CARTESIAN_POINT('',(5.551115123126E-17,-6.907122089751E-15));+#1742 = DIRECTION('',(0.,-1.));+#1743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1744 = ADVANCED_FACE('',(#1745,#1748),#1655,.F.);+#1745 = FACE_BOUND('',#1746,.F.);+#1746 = EDGE_LOOP('',(#1747));+#1747 = ORIENTED_EDGE('',*,*,#1640,.T.);+#1748 = FACE_BOUND('',#1749,.F.);+#1749 = EDGE_LOOP('',(#1750));+#1750 = ORIENTED_EDGE('',*,*,#1723,.F.);+#1751 = ADVANCED_FACE('',(#1752,#1755),#1627,.T.);+#1752 = FACE_BOUND('',#1753,.T.);+#1753 = EDGE_LOOP('',(#1754));+#1754 = ORIENTED_EDGE('',*,*,#1612,.T.);+#1755 = FACE_BOUND('',#1756,.T.);+#1756 = EDGE_LOOP('',(#1757));+#1757 = ORIENTED_EDGE('',*,*,#1700,.F.);+#1758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1762)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1759,#1760,#1761)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#1759 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#1760 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#1761 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#1762 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#1759,+  'distance_accuracy_value','confusion accuracy');+#1763 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1764,#1766);+#1764 = ( REPRESENTATION_RELATIONSHIP('','',#1575,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1765) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#1765 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19);+#1766 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #1767);+#1767 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','insulator','',#5,#1570,$);+#1768 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1572));+#1769 = SHAPE_DEFINITION_REPRESENTATION(#1770,#1776);+#1770 = PRODUCT_DEFINITION_SHAPE('','',#1771);+#1771 = PRODUCT_DEFINITION('design','',#1772,#1775);+#1772 = PRODUCT_DEFINITION_FORMATION('','',#1773);+#1773 = PRODUCT('contact','contact','',(#1774));+#1774 = PRODUCT_CONTEXT('',#2,'mechanical');+#1775 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#1776 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#1777),#2063);+#1777 = MANIFOLD_SOLID_BREP('',#1778);+#1778 = CLOSED_SHELL('',(#1779,#1871,#1910,#1945,#2000,#2055,#2059));+#1779 = ADVANCED_FACE('',(#1780),#1793,.T.);+#1780 = FACE_BOUND('',#1781,.F.);+#1781 = EDGE_LOOP('',(#1782,#1816,#1839,#1870));+#1782 = ORIENTED_EDGE('',*,*,#1783,.F.);+#1783 = EDGE_CURVE('',#1784,#1784,#1786,.T.);+#1784 = VERTEX_POINT('',#1785);+#1785 = CARTESIAN_POINT('',(0.81,0.275,0.36));+#1786 = SURFACE_CURVE('',#1787,(#1792,#1804),.PCURVE_S1.);+#1787 = CIRCLE('',#1788,0.275);+#1788 = AXIS2_PLACEMENT_3D('',#1789,#1790,#1791);+#1789 = CARTESIAN_POINT('',(0.81,0.,0.36));+#1790 = DIRECTION('',(1.,0.,0.));+#1791 = DIRECTION('',(0.,1.,0.));+#1792 = PCURVE('',#1793,#1798);+#1793 = CYLINDRICAL_SURFACE('',#1794,0.275);+#1794 = AXIS2_PLACEMENT_3D('',#1795,#1796,#1797);+#1795 = CARTESIAN_POINT('',(0.81,0.,0.36));+#1796 = DIRECTION('',(-1.,-0.,-0.));+#1797 = DIRECTION('',(0.,1.,0.));+#1798 = DEFINITIONAL_REPRESENTATION('',(#1799),#1803);+#1799 = LINE('',#1800,#1801);+#1800 = CARTESIAN_POINT('',(-0.,0.));+#1801 = VECTOR('',#1802,1.);+#1802 = DIRECTION('',(-1.,0.));+#1803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1804 = PCURVE('',#1805,#1810);+#1805 = PLANE('',#1806);+#1806 = AXIS2_PLACEMENT_3D('',#1807,#1808,#1809);+#1807 = CARTESIAN_POINT('',(0.81,-9.711932759513E-18,0.36));+#1808 = DIRECTION('',(1.,0.,0.));+#1809 = DIRECTION('',(-0.,0.,1.));+#1810 = DEFINITIONAL_REPRESENTATION('',(#1811),#1815);+#1811 = CIRCLE('',#1812,0.275);+#1812 = AXIS2_PLACEMENT_2D('',#1813,#1814);+#1813 = CARTESIAN_POINT('',(-5.551115123126E-17,-9.711932759513E-18));+#1814 = DIRECTION('',(0.,-1.));+#1815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1816 = ORIENTED_EDGE('',*,*,#1817,.T.);+#1817 = EDGE_CURVE('',#1784,#1818,#1820,.T.);+#1818 = VERTEX_POINT('',#1819);+#1819 = CARTESIAN_POINT('',(4.83,0.275,0.36));+#1820 = SEAM_CURVE('',#1821,(#1825,#1832),.PCURVE_S1.);+#1821 = LINE('',#1822,#1823);+#1822 = CARTESIAN_POINT('',(0.81,0.275,0.36));+#1823 = VECTOR('',#1824,1.);+#1824 = DIRECTION('',(1.,0.,0.));+#1825 = PCURVE('',#1793,#1826);+#1826 = DEFINITIONAL_REPRESENTATION('',(#1827),#1831);+#1827 = LINE('',#1828,#1829);+#1828 = CARTESIAN_POINT('',(-6.28318530718,0.));+#1829 = VECTOR('',#1830,1.);+#1830 = DIRECTION('',(-0.,-1.));+#1831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1832 = PCURVE('',#1793,#1833);+#1833 = DEFINITIONAL_REPRESENTATION('',(#1834),#1838);+#1834 = LINE('',#1835,#1836);+#1835 = CARTESIAN_POINT('',(-0.,0.));+#1836 = VECTOR('',#1837,1.);+#1837 = DIRECTION('',(-0.,-1.));+#1838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1839 = ORIENTED_EDGE('',*,*,#1840,.F.);+#1840 = EDGE_CURVE('',#1818,#1818,#1841,.T.);+#1841 = SURFACE_CURVE('',#1842,(#1847,#1854),.PCURVE_S1.);+#1842 = CIRCLE('',#1843,0.275);+#1843 = AXIS2_PLACEMENT_3D('',#1844,#1845,#1846);+#1844 = CARTESIAN_POINT('',(4.83,0.,0.36));+#1845 = DIRECTION('',(-1.,0.,0.));+#1846 = DIRECTION('',(0.,1.,0.));+#1847 = PCURVE('',#1793,#1848);+#1848 = DEFINITIONAL_REPRESENTATION('',(#1849),#1853);+#1849 = LINE('',#1850,#1851);+#1850 = CARTESIAN_POINT('',(-6.28318530718,-4.02));+#1851 = VECTOR('',#1852,1.);+#1852 = DIRECTION('',(1.,-0.));+#1853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1854 = PCURVE('',#1855,#1860);+#1855 = PLANE('',#1856);+#1856 = AXIS2_PLACEMENT_3D('',#1857,#1858,#1859);+#1857 = CARTESIAN_POINT('',(4.83,-1.504665638798E-17,0.36));+#1858 = DIRECTION('',(1.,0.,0.));+#1859 = DIRECTION('',(-0.,0.,1.));+#1860 = DEFINITIONAL_REPRESENTATION('',(#1861),#1869);+#1861 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1862,#1863,#1864,#1865,+#1866,#1867,#1868),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1862 = CARTESIAN_POINT('',(-5.551115123126E-17,-0.275));+#1863 = CARTESIAN_POINT('',(-0.476313972081,-0.275));+#1864 = CARTESIAN_POINT('',(-0.238156986041,0.1375));+#1865 = CARTESIAN_POINT('',(-1.228667251844E-16,0.55));+#1866 = CARTESIAN_POINT('',(0.238156986041,0.1375));+#1867 = CARTESIAN_POINT('',(0.476313972081,-0.275));+#1868 = CARTESIAN_POINT('',(-5.551115123126E-17,-0.275));+#1869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1870 = ORIENTED_EDGE('',*,*,#1817,.F.);+#1871 = ADVANCED_FACE('',(#1872,#1875),#1805,.F.);+#1872 = FACE_BOUND('',#1873,.F.);+#1873 = EDGE_LOOP('',(#1874));+#1874 = ORIENTED_EDGE('',*,*,#1783,.T.);+#1875 = FACE_BOUND('',#1876,.F.);+#1876 = EDGE_LOOP('',(#1877));+#1877 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1878 = EDGE_CURVE('',#1879,#1879,#1881,.T.);+#1879 = VERTEX_POINT('',#1880);+#1880 = CARTESIAN_POINT('',(0.81,0.15,0.36));+#1881 = SURFACE_CURVE('',#1882,(#1887,#1898),.PCURVE_S1.);+#1882 = CIRCLE('',#1883,0.15);+#1883 = AXIS2_PLACEMENT_3D('',#1884,#1885,#1886);+#1884 = CARTESIAN_POINT('',(0.81,0.,0.36));+#1885 = DIRECTION('',(-1.,0.,0.));+#1886 = DIRECTION('',(0.,1.,0.));+#1887 = PCURVE('',#1805,#1888);+#1888 = DEFINITIONAL_REPRESENTATION('',(#1889),#1897);+#1889 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1890,#1891,#1892,#1893,+#1894,#1895,#1896),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1890 = CARTESIAN_POINT('',(-5.551115123126E-17,-0.15));+#1891 = CARTESIAN_POINT('',(-0.259807621135,-0.15));+#1892 = CARTESIAN_POINT('',(-0.129903810568,7.5E-02));+#1893 = CARTESIAN_POINT('',(-9.225055520568E-17,0.3));+#1894 = CARTESIAN_POINT('',(0.129903810568,7.5E-02));+#1895 = CARTESIAN_POINT('',(0.259807621135,-0.15));+#1896 = CARTESIAN_POINT('',(-5.551115123126E-17,-0.15));+#1897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1898 = PCURVE('',#1899,#1904);+#1899 = CYLINDRICAL_SURFACE('',#1900,0.15);+#1900 = AXIS2_PLACEMENT_3D('',#1901,#1902,#1903);+#1901 = CARTESIAN_POINT('',(0.72,0.,0.36));+#1902 = DIRECTION('',(-1.,-0.,-0.));+#1903 = DIRECTION('',(0.,1.,0.));+#1904 = DEFINITIONAL_REPRESENTATION('',(#1905),#1909);+#1905 = LINE('',#1906,#1907);+#1906 = CARTESIAN_POINT('',(-6.28318530718,-9.E-02));+#1907 = VECTOR('',#1908,1.);+#1908 = DIRECTION('',(1.,-0.));+#1909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1910 = ADVANCED_FACE('',(#1911,#1942),#1855,.F.);+#1911 = FACE_BOUND('',#1912,.F.);+#1912 = EDGE_LOOP('',(#1913));+#1913 = ORIENTED_EDGE('',*,*,#1914,.T.);+#1914 = EDGE_CURVE('',#1915,#1915,#1917,.T.);+#1915 = VERTEX_POINT('',#1916);+#1916 = CARTESIAN_POINT('',(4.83,0.355,0.36));+#1917 = SURFACE_CURVE('',#1918,(#1923,#1930),.PCURVE_S1.);+#1918 = CIRCLE('',#1919,0.355);+#1919 = AXIS2_PLACEMENT_3D('',#1920,#1921,#1922);+#1920 = CARTESIAN_POINT('',(4.83,0.,0.36));+#1921 = DIRECTION('',(1.,0.,0.));+#1922 = DIRECTION('',(0.,1.,0.));+#1923 = PCURVE('',#1855,#1924);+#1924 = DEFINITIONAL_REPRESENTATION('',(#1925),#1929);+#1925 = CIRCLE('',#1926,0.355);+#1926 = AXIS2_PLACEMENT_2D('',#1927,#1928);+#1927 = CARTESIAN_POINT('',(-5.551115123126E-17,-1.504665638798E-17));+#1928 = DIRECTION('',(0.,-1.));+#1929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1930 = PCURVE('',#1931,#1936);+#1931 = CYLINDRICAL_SURFACE('',#1932,0.355);+#1932 = AXIS2_PLACEMENT_3D('',#1933,#1934,#1935);+#1933 = CARTESIAN_POINT('',(4.83,0.,0.36));+#1934 = DIRECTION('',(-1.,-0.,-0.));+#1935 = DIRECTION('',(0.,1.,0.));+#1936 = DEFINITIONAL_REPRESENTATION('',(#1937),#1941);+#1937 = LINE('',#1938,#1939);+#1938 = CARTESIAN_POINT('',(-0.,0.));+#1939 = VECTOR('',#1940,1.);+#1940 = DIRECTION('',(-1.,0.));+#1941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1942 = FACE_BOUND('',#1943,.F.);+#1943 = EDGE_LOOP('',(#1944));+#1944 = ORIENTED_EDGE('',*,*,#1840,.T.);+#1945 = ADVANCED_FACE('',(#1946),#1899,.F.);+#1946 = FACE_BOUND('',#1947,.T.);+#1947 = EDGE_LOOP('',(#1948,#1949,#1972,#1999));+#1948 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1949 = ORIENTED_EDGE('',*,*,#1950,.T.);+#1950 = EDGE_CURVE('',#1879,#1951,#1953,.T.);+#1951 = VERTEX_POINT('',#1952);+#1952 = CARTESIAN_POINT('',(1.44,0.15,0.36));+#1953 = SEAM_CURVE('',#1954,(#1958,#1965),.PCURVE_S1.);+#1954 = LINE('',#1955,#1956);+#1955 = CARTESIAN_POINT('',(0.72,0.15,0.36));+#1956 = VECTOR('',#1957,1.);+#1957 = DIRECTION('',(1.,0.,0.));+#1958 = PCURVE('',#1899,#1959);+#1959 = DEFINITIONAL_REPRESENTATION('',(#1960),#1964);+#1960 = LINE('',#1961,#1962);+#1961 = CARTESIAN_POINT('',(-6.28318530718,0.));+#1962 = VECTOR('',#1963,1.);+#1963 = DIRECTION('',(-0.,-1.));+#1964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1965 = PCURVE('',#1899,#1966);+#1966 = DEFINITIONAL_REPRESENTATION('',(#1967),#1971);+#1967 = LINE('',#1968,#1969);+#1968 = CARTESIAN_POINT('',(-0.,0.));+#1969 = VECTOR('',#1970,1.);+#1970 = DIRECTION('',(-0.,-1.));+#1971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1972 = ORIENTED_EDGE('',*,*,#1973,.T.);+#1973 = EDGE_CURVE('',#1951,#1951,#1974,.T.);+#1974 = SURFACE_CURVE('',#1975,(#1980,#1987),.PCURVE_S1.);+#1975 = CIRCLE('',#1976,0.15);+#1976 = AXIS2_PLACEMENT_3D('',#1977,#1978,#1979);+#1977 = CARTESIAN_POINT('',(1.44,0.,0.36));+#1978 = DIRECTION('',(1.,0.,0.));+#1979 = DIRECTION('',(0.,1.,0.));+#1980 = PCURVE('',#1899,#1981);+#1981 = DEFINITIONAL_REPRESENTATION('',(#1982),#1986);+#1982 = LINE('',#1983,#1984);+#1983 = CARTESIAN_POINT('',(-0.,-0.72));+#1984 = VECTOR('',#1985,1.);+#1985 = DIRECTION('',(-1.,0.));+#1986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1987 = PCURVE('',#1988,#1993);+#1988 = PLANE('',#1989);+#1989 = AXIS2_PLACEMENT_3D('',#1990,#1991,#1992);+#1990 = CARTESIAN_POINT('',(1.44,-1.780521005911E-17,0.36));+#1991 = DIRECTION('',(1.,0.,0.));+#1992 = DIRECTION('',(-0.,0.,1.));+#1993 = DEFINITIONAL_REPRESENTATION('',(#1994),#1998);+#1994 = CIRCLE('',#1995,0.15);+#1995 = AXIS2_PLACEMENT_2D('',#1996,#1997);+#1996 = CARTESIAN_POINT('',(0.,-1.780521005911E-17));+#1997 = DIRECTION('',(0.,-1.));+#1998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1999 = ORIENTED_EDGE('',*,*,#1950,.F.);+#2000 = ADVANCED_FACE('',(#2001),#1931,.T.);+#2001 = FACE_BOUND('',#2002,.F.);+#2002 = EDGE_LOOP('',(#2003,#2026,#2053,#2054));+#2003 = ORIENTED_EDGE('',*,*,#2004,.T.);+#2004 = EDGE_CURVE('',#1915,#2005,#2007,.T.);+#2005 = VERTEX_POINT('',#2006);+#2006 = CARTESIAN_POINT('',(7.95,0.355,0.36));+#2007 = SEAM_CURVE('',#2008,(#2012,#2019),.PCURVE_S1.);+#2008 = LINE('',#2009,#2010);+#2009 = CARTESIAN_POINT('',(4.83,0.355,0.36));+#2010 = VECTOR('',#2011,1.);+#2011 = DIRECTION('',(1.,0.,0.));+#2012 = PCURVE('',#1931,#2013);+#2013 = DEFINITIONAL_REPRESENTATION('',(#2014),#2018);+#2014 = LINE('',#2015,#2016);+#2015 = CARTESIAN_POINT('',(-0.,0.));+#2016 = VECTOR('',#2017,1.);+#2017 = DIRECTION('',(-0.,-1.));+#2018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2019 = PCURVE('',#1931,#2020);+#2020 = DEFINITIONAL_REPRESENTATION('',(#2021),#2025);+#2021 = LINE('',#2022,#2023);+#2022 = CARTESIAN_POINT('',(-6.28318530718,0.));+#2023 = VECTOR('',#2024,1.);+#2024 = DIRECTION('',(-0.,-1.));+#2025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2026 = ORIENTED_EDGE('',*,*,#2027,.T.);+#2027 = EDGE_CURVE('',#2005,#2005,#2028,.T.);+#2028 = SURFACE_CURVE('',#2029,(#2034,#2041),.PCURVE_S1.);+#2029 = CIRCLE('',#2030,0.355);+#2030 = AXIS2_PLACEMENT_3D('',#2031,#2032,#2033);+#2031 = CARTESIAN_POINT('',(7.95,0.,0.36));+#2032 = DIRECTION('',(1.,0.,0.));+#2033 = DIRECTION('',(0.,1.,0.));+#2034 = PCURVE('',#1931,#2035);+#2035 = DEFINITIONAL_REPRESENTATION('',(#2036),#2040);+#2036 = LINE('',#2037,#2038);+#2037 = CARTESIAN_POINT('',(-0.,-3.12));+#2038 = VECTOR('',#2039,1.);+#2039 = DIRECTION('',(-1.,0.));+#2040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2041 = PCURVE('',#2042,#2047);+#2042 = PLANE('',#2043);+#2043 = AXIS2_PLACEMENT_3D('',#2044,#2045,#2046);+#2044 = CARTESIAN_POINT('',(7.95,-1.504665638798E-17,0.36));+#2045 = DIRECTION('',(1.,0.,0.));+#2046 = DIRECTION('',(-0.,0.,1.));+#2047 = DEFINITIONAL_REPRESENTATION('',(#2048),#2052);+#2048 = CIRCLE('',#2049,0.355);+#2049 = AXIS2_PLACEMENT_2D('',#2050,#2051);+#2050 = CARTESIAN_POINT('',(-5.551115123126E-17,-1.504665638798E-17));+#2051 = DIRECTION('',(0.,-1.));+#2052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2053 = ORIENTED_EDGE('',*,*,#2004,.F.);+#2054 = ORIENTED_EDGE('',*,*,#1914,.F.);+#2055 = ADVANCED_FACE('',(#2056),#1988,.F.);+#2056 = FACE_BOUND('',#2057,.F.);+#2057 = EDGE_LOOP('',(#2058));+#2058 = ORIENTED_EDGE('',*,*,#1973,.T.);+#2059 = ADVANCED_FACE('',(#2060),#2042,.T.);+#2060 = FACE_BOUND('',#2061,.T.);+#2061 = EDGE_LOOP('',(#2062));+#2062 = ORIENTED_EDGE('',*,*,#2027,.T.);+#2063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2067)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#2064,#2065,#2066)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#2064 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#2065 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#2066 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#2067 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2064,+  'distance_accuracy_value','confusion accuracy');+#2068 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2069,#2071);+#2069 = ( REPRESENTATION_RELATIONSHIP('','',#1776,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2070) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#2070 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23);+#2071 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #2072);+#2072 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','contact','',#5,#1771,$);+#2073 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1773));+#2074 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+    #2075),#2063);+#2075 = STYLED_ITEM('color',(#2076),#1777);+#2076 = PRESENTATION_STYLE_ASSIGNMENT((#2077));+#2077 = SURFACE_STYLE_USAGE(.BOTH.,#2078);+#2078 = SURFACE_SIDE_STYLE('',(#2079));+#2079 = SURFACE_STYLE_FILL_AREA(#2080);+#2080 = FILL_AREA_STYLE('',(#2081));+#2081 = FILL_AREA_STYLE_COLOUR('',#2082);+#2082 = COLOUR_RGB('',0.950000001282,0.78000000177,0.299999996101);+#2083 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+    #2084),#1557);+#2084 = STYLED_ITEM('color',(#2085),#41);+#2085 = PRESENTATION_STYLE_ASSIGNMENT((#2086));+#2086 = SURFACE_STYLE_USAGE(.BOTH.,#2087);+#2087 = SURFACE_SIDE_STYLE('',(#2088));+#2088 = SURFACE_STYLE_FILL_AREA(#2089);+#2089 = FILL_AREA_STYLE('',(#2090));+#2090 = FILL_AREA_STYLE_COLOUR('',#2091);+#2091 = COLOUR_RGB('',0.850000012718,0.649999988539,0.130000001093);+#2092 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+    #2093),#1758);+#2093 = STYLED_ITEM('color',(#2094),#1576);+#2094 = PRESENTATION_STYLE_ASSIGNMENT((#2095));+#2095 = SURFACE_STYLE_USAGE(.BOTH.,#2096);+#2096 = SURFACE_SIDE_STYLE('',(#2097));+#2097 = SURFACE_STYLE_FILL_AREA(#2098);+#2098 = FILL_AREA_STYLE('',(#2099));+#2099 = FILL_AREA_STYLE_COLOUR('',#2100);+#2100 = COLOUR_RGB('',0.950000001282,0.950000001282,0.920000012397);+ENDSEC;+END-ISO-10303-21;
README.md+3−3
@@ -4,7 +4,7 @@  **Amphenol RF** · RF Coaxial Connectors (SMPM jack) · 925-126j-51p -925-126J-51P from Amphenol RF, in a 925-126j-51p. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model extracted from the board STEP export, seated in the footprint frame). **Staged for validation: see the open items in the verification log above.**+925-126J-51P from Amphenol RF, in a 925-126j-51p. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed). **Staged for validation: see the open items in the verification log above.**  ## Pinout @@ -32,8 +32,8 @@  ## Provenance -- **Datasheet:** [Amphenol RF datasheet](https://www.amphenolrf.com/en-us/assets/file/4065789372/) (sha256 `d0f7d88e2577de06`, retrieved 2026-10-09, tier: mfr)-- **CAD:** Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export.+- **Datasheet:** [Amphenol RF datasheet](https://www.amphenolrf.com/en-us/assets/file/4065789372/) (sha256 `c084a78cf86a26df`, retrieved 2026-10-09, tier: mfr)+- **CAD:** Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed. - **Pins:** KiCad symbol from the source board.  [Datasheet PDF](docs/925-126j-51p-datasheet.pdf)
docs/925-126j-51p-datasheet.pdf
⋯ 1 unchanged line ⋯
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+14−14
@@ -55,35 +55,35 @@         "url": "https://www.mouser.com/en/ProductDetail/Amphenol-RF/925-126J-51P?qs=eFOtW6xYNWFRPF2LG3MgcQ%3D%3D"       },       "lcsc": false,-      "lcsc_note": "2026-10-08: no LCSC number on the source BOM and none found in the JLCPCB/LCSC catalogue for 925-126J-51P."+      "lcsc_note": "2026-10-09: no LCSC number on the source BOM and none found in the JLCPCB/LCSC catalogue for 925-126J-51P."     },     "pins": [       {         "number": "1",-        "name": "In",+        "name": "CONTACT",         "type": "passive",-        "description": "Centre contact (RF signal). [from symbol]"+        "description": "Centre contact (RF signal), per the manufacturer drawing. [from drawing]"       },       {         "number": "2",-        "name": "Ext",+        "name": "BODY",         "type": "passive",-        "description": "Outer body / shield (RF ground). [from symbol]"+        "description": "Connector body / outer conductor (RF ground), per the manufacturer drawing. [from drawing]"       }     ],     "provenance": {       "factory_chain": {         "pipeline": "adom-parts (board-derived) 0.1",         "pins": "KiCad symbol from the source board",-        "at": "2026-10-08"+        "at": "2026-10-09"       },       "datasheet": {         "url": "https://www.amphenolrf.com/en-us/assets/file/4065789372/",         "pages": null,-        "sha256": "d0f7d88e2577de061e8cc87627ea089cfc48759d87fd4e1e6bc4bc5833e70f65",+        "sha256": "c084a78cf86a26df50117cdfaf8c396370d6f4566cd3bde95fa2a4691d9a6b5c",         "source_tier": "mfr"       },-      "cad": "Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export",+      "cad": "Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed",       "pins": {         "total": 2,         "described": 2,@@ -104,14 +104,14 @@         "origin": "footprint origin",         "seat": "z = 0 (PCB top surface)",         "extents_mm": [-          8.7,-          4.6,-          2.8+          7.95,+          4.47,+          3.51         ],-        "zmin_mm": -0.0,+        "zmin_mm": -1.4,         "footprint_binding": "identity",-        "sha256": "ac070a7839401e7e9f0c42b2e7c2fecd3a733fdc43dc0dbe62491fa895e82200",-        "checked": "2026-10-08",+        "sha256": "b94cc60314714f4df18a787141b6e169fc713d379ca7d079083fa1e5fc3f8001",+        "checked": "2026-10-09",         "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"       }     ]
verification.json+3−26
@@ -51,7 +51,7 @@    "files": {     "925-126j-51p.kicad_sym": "fb257ed30a2f5418a312089d0b862c0cdd3090d2053948f6936ac80ea7a8b614",     "925-126j-51p.kicad_mod": "7898893b816ae7bdf84eee9fda650ae2ae912185b0cb964119ed7395e9308c0e",-    "925-126j-51p.step": "ac070a7839401e7e9f0c42b2e7c2fecd3a733fdc43dc0dbe62491fa895e82200"+    "925-126j-51p.step": "b94cc60314714f4df18a787141b6e169fc713d379ca7d079083fa1e5fc3f8001"    }   },   {@@ -84,7 +84,7 @@     "handle": "claude"    },    "status": "open",-   "title": "3D pose (component-page-verify): edge-mount SMPM: the body overhangs the board edge, so it...",+   "title": "Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...",    "scope": [     "review"    ],@@ -93,30 +93,7 @@    ],    "checks": [     {-     "text": "3D pose (component-page-verify): edge-mount SMPM: the body overhangs the board edge, so its centre is ~2.8 mm off the pad pattern. This is the real part geometry from the source board, kept deliberately; a person should confirm against the drawing.",-     "result": "note"-    }-   ],-   "evidence": [],-   "files": {}-  },-  {-   "date": "2026-10-09",-   "by": {-    "name": "Claude (AI build)",-    "handle": "claude"-   },-   "status": "open",-   "title": "Datasheet text check: the manufacturer drawing is an image with no text layer, so automate...",-   "scope": [-    "review"-   ],-   "variants": [-    "*"-   ],-   "checks": [-    {-     "text": "Datasheet text check: the manufacturer drawing is an image with no text layer, so automated pin-name checks cannot read it; names follow the drawing and need a person to confirm.",+     "text": "Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.",      "result": "note"     }    ],