component

925-126J-51P

Public Made by Adom

by adom

Amphenol RF RF Coaxial Connectors (SMPM jack), 925-126j-51p. KiCad symbol, footprint and 3D as used on Adom boards.

componentconnectors925-126j-51pboard-derived

Verified 925-126J-51P

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Amphenol RF customer outline drawing 925-126J-51P Rev A; footprint and 3D rebuilt to itfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: Amphenol RF customer outline drawing 925-126J-51P Rev A (03-Jun-16, ECO 00941), the file the product page https://www.amphenolrf.com/en-us/part/925-126j-51p/4449/ links today (asset 4065789372, fetched 2026-10-27, sha256 d0f7d88e2577de06). Amphenol's file is vector art with no text layer; the attached copy is that file with an invisible OCR text layer (ocrmypdf 15.2), renders pixel-identical. Replaces the page's 400 dpi raster + OCR copy
  • ✓BOM: rf-molecules rf-scaffold-module J3, J4 (BOM 'Conn_Coaxial_Small,J3/J4,925-126j-51p', footprint coax:925-126j-51p): the intended part is this page's MPN
  • ✓Pins: 1 CONTACT = centre contact, 2 BODY = body (names from the drawing's materials list; the drawing has no pin table); both passive; descriptions rewritten from the drawing, cited p.1
  • ✓Footprint rebuilt to the RECOMMENDED PCB LAYOUT, x = 0 on the board edge: Edge.Cuts slot 3.60 (3.6 +-0.05) wide x 5.03 deep (was 3.40 x 5.00, zero clearance to the 3.4 REF body); outer pads 0..8.12 from the edge, outer edges 4.92 apart, inner edges 3.60 apart over the slot and 2.08 apart from 5.03 to 8.12 (each an L of two rectangles numbered 2, so EAGLE/Fusion keep the full copper); centre pad 0.97 wide from 5.03 to 8.28 (was 5.10..8.35: every copper edge had been 0.07 further from the edge than drawn)
  • ✓3D: Amphenol RF's STP download (asset 4066964497) redirects to the myAmphenol login and the site has no redistribution licence; KiCad has no SMPM model; model built by Adom from the drawing (tier 3, CC-BY-SA-4.0, builder provenance/tools/build_925-126j-51p.py): 7.95 REF to the tab ends, contact to 8.11, 4.47 wide, z -1.40..2.11 (3.51 REF, 2.11 REF), 3.4 REF below the board with 0.32 chamfers, tabs 0.58 thick on z = 0, contact 0.71 dia on the axis 0.36 above the mounting plane; bore depth and pin tip position are not dimensioned (display assumptions, in provenance/3d-model.json)
  • ✓Pose (step_pose.py, both STEPs): Z-up, identity binding, centre 0.085 mm from the pad-pattern centre, seated on z = 0 on the pads with the body 1.40 mm below the board through the Edge.Cuts slot, as the drawing requires; MPN etched on the top flat (adom-chip-laser)
  • ✓DigiKey ARF2549-ND and Mouser 523-925-126J-51P (Amphenol RF 925-126J-51P), confirmed by part lookup 2026-10-27
  • •Boards to update (Caleb): rf-scaffold-module J3, J4 still carry the 3.40 x 5.00 slot and the 0.07 mm copper offset, and their 3D model reference is 925-169J-51PT_SMPM_Coax.step (another part)
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Amphenol RF)product page
Verified files✓ 925-126j-51p.kicad_sym✓ 925-126j-51p.kicad_mod✓ 925-126j-51p.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and v...superseded
reviewfor all variants
  • •On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and vice versa (swapped). This page uses the geometry placed for this reference designator; confirm it matches the Amphenol 925-126J-51P drawing.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 925-126j-51p.kicad_sym! 925-126j-51p.kicad_mod! 925-126j-51p.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component CAD, datasheet and docs (1)

Caleb ·ab1cde07db ·20d ago ·parent c0bc300
8 files changed +631−1
925-126j-51p.kicad_mod+120925-126j-51p.kicad_sym+140925-126j-51p.lbr+133README.md+37−1docs/925-126j-51p-datasheet.pdfdocs/hero.pngpackage.json+120verification.json+81
925-126j-51p.kicad_modadded+120
@@ -0,0 +1,120 @@+(footprint "925-126j-51p"+	(layer "F.Cu")+	(property "Reference" "REF**"+		(at 10 0)+		(unlocked yes)+		(layer "F.SilkS")+		(hide yes)+		(uuid "0d93d4cf-b6c4-4e8f-b9d5-3552334b3efb")+		(effects+			(font (size 1 1) (thickness 0.1))+		)+	)+	(property "Value" "925-126j-51p"+		(at -38.375 -15.225)+		(unlocked yes)+		(layer "F.Fab")+		(hide yes)+		(uuid "4b3592fd-dfaf-492c-b792-f3b35a41615a")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property "Datasheet" ""+		(at 0 0)+		(unlocked yes)+		(layer "F.Fab")+		(hide yes)+		(uuid "c45efde2-2693-435d-b186-d37d08c9dc02")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property "Description" "small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...)"+		(at 0 0)+		(unlocked yes)+		(layer "F.Fab")+		(hide yes)+		(uuid "253dc0a2-5c65-4210-acf2-a34f910fc762")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property ki_fp_filters "*BNC* *SMA* *SMB* *SMC* *Cinch* *LEMO* *UMRF* *MCX* *U.FL*")+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start 0 -1.7)+		(end 0 -2.7)+		(stroke (width 0.05) (type default))+		(layer "Edge.Cuts")+		(uuid "e3070bd7-725a-4493-a3d5-ca41167409de")+	)+	(fp_line+		(start 0 1.7)+		(end 0 2.7)+		(stroke (width 0.05) (type default))+		(layer "Edge.Cuts")+		(uuid "5c467be4-e1af-4499-9f1c-5db659d6f46c")+	)+	(fp_line+		(start 5 -1.7)+		(end 0 -1.7)+		(stroke (width 0.05) (type default))+		(layer "Edge.Cuts")+		(uuid "ef0a1c8e-69d5-48b5-b087-26cf308f929e")+	)+	(fp_line+		(start 5 -1.7)+		(end 5 1.7)+		(stroke (width 0.05) (type default))+		(layer "Edge.Cuts")+		(uuid "305d86c8-2de6-4fa2-82ad-10fc3796109f")+	)+	(fp_line+		(start 5 1.7)+		(end 0 1.7)+		(stroke (width 0.05) (type default))+		(layer "Edge.Cuts")+		(uuid "8caa9ed8-9179-43b9-b2ec-a06ab6bbbc7b")+	)+	(fp_rect+		(start -0.1 -2.7)+		(end 8.6 2.7)+		(stroke (width 0.05) (type default))+		(fill no)+		(layer "F.CrtYd")+		(uuid "6bd97f30-5395-4949-ba00-fb9477abb28e")+	)+	(pad "1" smd custom+		(at 6.725 0)+		(size 3.25 0.97)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(options (clearance outline) (anchor rect))+		(primitives)+	)+	(pad "2" smd custom+		(at 4.13 -2.13)+		(size 8.12 0.66)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(options (clearance outline) (anchor rect))+		(primitives+			(gr_rect (start 0.97 -0.33) (end 4.06 1.09) (width 0) (fill yes))+		)+	)+	(pad "2" smd custom+		(at 4.13 2.13)+		(size 8.12 0.66)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(options (clearance outline) (anchor rect))+		(primitives+			(gr_rect (start 0.97 -1.09) (end 4.06 0.33) (width 0) (fill yes))+		)+	)+	(embedded_fonts no)+	(model "${KIPRJMOD}/925-126j-51p.step"+		(offset (xyz 0 0 0))+		(scale (xyz 1 1 1))+		(rotate (xyz 0 0 0))+	)+)
925-126j-51p.kicad_symadded+140
@@ -0,0 +1,140 @@+(kicad_symbol_lib+	(version 20241209)+	(generator "adom-parts")+	(generator_version "1.0")+	(symbol "925-126j-51p"+		(pin_numbers (hide yes))+		(pin_names (offset 1.016) (hide yes))+		(exclude_from_sim no)+		(in_bom yes)+		(on_board yes)+		(in_pos_files yes)+		(duplicate_pin_numbers_are_jumpers no)+		(property "Reference" "J"+			(at 0.254 3.048 0)+			(show_name no)+			(do_not_autoplace no)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "Manufacturer" "Amphenol RF" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "DigiKey" "ARF2549-ND" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Mouser" "523-925-126J-51P" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "925-126j-51p"+			(at 0 -3.81 0)+			(show_name no)+			(do_not_autoplace no)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "Footprint" ""+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "Datasheet" "https://www.amphenolrf.com/en-us/assets/file/4065789372/"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "Description" "small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...)"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "ki_keywords" "BNC SMA SMB SMC LEMO coaxial connector CINCH RCA MCX MMCX U.FL UMRF"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "ki_fp_filters" "*BNC* *SMA* *SMB* *SMC* *Cinch* *LEMO* *UMRF* *MCX* *U.FL*"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "MPN" "925-126J-51P"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(symbol "925-126j-51p_0_1"+			(polyline+				(pts (xy -2.54 0) (xy -0.508 0))+				(stroke (width 0) (type default))+				(fill (type none))+			)+			(circle+				(center 0 0)+				(radius 0.508)+				(stroke (width 0.2032) (type default))+				(fill (type none))+			)+		)+		(symbol "925-126j-51p_1_1"+			(arc+				(start 1.3484 0.0039)+				(mid 0.327 -1.308)+				(end -1.1916 -0.6311)+				(stroke (width 0.3048) (type default))+				(fill (type none))+			)+			(arc+				(start -1.1916 0.6311)+				(mid 0.327 1.3081)+				(end 1.3484 -0.0039)+				(stroke (width 0.3048) (type default))+				(fill (type none))+			)+			(pin passive line+				(at -2.54 0 0)+				(length 1.27)+				(name "In"+					(effects+						(font (size 1.27 1.27))+					)+				)+				(number "1"+					(effects+						(font (size 1.27 1.27))+					)+				)+			)+			(pin passive line+				(at 2.54 0 180)+				(length 1.27)+				(name "Ext"+					(effects+						(font (size 1.27 1.27))+					)+				)+				(number "2"+					(effects+						(font (size 1.27 1.27))+					)+				)+			)+		)+		(embedded_fonts no)+	)+)
925-126j-51p.lbradded+133
@@ -0,0 +1,133 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...)</description>+<packages>+<package name="925-126j-51p">+  <description>3 pads, 8.3 x 4.9 mm</description>+  <smd name="1" x="6.7250" y="-0.0000" dx="3.2500" dy="0.9700" layer="1"/>+  <smd name="2" x="4.1300" y="2.1300" dx="8.1200" dy="0.6600" layer="1"/>+  <smd name="2@2" x="4.1300" y="-2.1300" dx="8.1200" dy="0.6600" layer="1"/>+  <wire x1="-3.9900" y1="-2.7900" x2="12.2500" y2="-2.7900" width="0.127" layer="21"/>+  <wire x1="12.2500" y1="-2.7900" x2="12.2500" y2="2.7900" width="0.127" layer="21"/>+  <wire x1="12.2500" y1="2.7900" x2="-3.9900" y2="2.7900" width="0.127" layer="21"/>+  <wire x1="-3.9900" y1="2.7900" x2="-3.9900" y2="-2.7900" width="0.127" layer="21"/>+  <text x="0" y="6.790" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-6.790" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="925-126j-51p">+  <description>small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...)</description>+  <circle x="0.0000" y="0.0000" radius="0.5080" width="0.1524" layer="94"/>+  <wire x1="-2.5400" y1="0.0000" x2="-0.5080" y2="0.0000" width="0.1524" layer="94"/>+  <wire x1="1.3484" y1="0.0039" x2="1.3163" y2="-0.2923" width="0.1524" layer="94"/>+  <wire x1="1.3163" y1="-0.2923" x2="1.2199" y2="-0.5743" width="0.1524" layer="94"/>+  <wire x1="1.2199" y1="-0.5743" x2="1.0640" y2="-0.8282" width="0.1524" layer="94"/>+  <wire x1="1.0640" y1="-0.8282" x2="0.8560" y2="-1.0417" width="0.1524" layer="94"/>+  <wire x1="0.8560" y1="-1.0417" x2="0.6063" y2="-1.2042" width="0.1524" layer="94"/>+  <wire x1="0.6063" y1="-1.2042" x2="0.3270" y2="-1.3080" width="0.1524" layer="94"/>+  <wire x1="0.3270" y1="-1.3080" x2="0.0317" y2="-1.3479" width="0.1524" layer="94"/>+  <wire x1="0.0317" y1="-1.3479" x2="-0.2651" y2="-1.3219" width="0.1524" layer="94"/>+  <wire x1="-0.2651" y1="-1.3219" x2="-0.5490" y2="-1.2314" width="0.1524" layer="94"/>+  <wire x1="-0.5490" y1="-1.2314" x2="-0.8061" y2="-1.0808" width="0.1524" layer="94"/>+  <wire x1="-0.8061" y1="-1.0808" x2="-1.0239" y2="-0.8774" width="0.1524" layer="94"/>+  <wire x1="-1.0239" y1="-0.8774" x2="-1.1916" y2="-0.6311" width="0.1524" layer="94"/>+  <wire x1="-1.1916" y1="0.6311" x2="-1.0239" y2="0.8774" width="0.1524" layer="94"/>+  <wire x1="-1.0239" y1="0.8774" x2="-0.8061" y2="1.0809" width="0.1524" layer="94"/>+  <wire x1="-0.8061" y1="1.0809" x2="-0.5491" y2="1.2315" width="0.1524" layer="94"/>+  <wire x1="-0.5491" y1="1.2315" x2="-0.2651" y2="1.3220" width="0.1524" layer="94"/>+  <wire x1="-0.2651" y1="1.3220" x2="0.0317" y2="1.3480" width="0.1524" layer="94"/>+  <wire x1="0.0317" y1="1.3480" x2="0.3270" y2="1.3081" width="0.1524" layer="94"/>+  <wire x1="0.3270" y1="1.3081" x2="0.6064" y2="1.2043" width="0.1524" layer="94"/>+  <wire x1="0.6064" y1="1.2043" x2="0.8561" y2="1.0417" width="0.1524" layer="94"/>+  <wire x1="0.8561" y1="1.0417" x2="1.0640" y2="0.8283" width="0.1524" layer="94"/>+  <wire x1="1.0640" y1="0.8283" x2="1.2199" y2="0.5743" width="0.1524" layer="94"/>+  <wire x1="1.2199" y1="0.5743" x2="1.3163" y2="0.2924" width="0.1524" layer="94"/>+  <wire x1="1.3163" y1="0.2924" x2="1.3484" y2="-0.0039" width="0.1524" layer="94"/>+  <text x="0.2540" y="3.0480" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-3.8100" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <wire x1="-2.5400" y1="0.0000" x2="-1.2700" y2="0.0000" width="0.254" layer="94"/>+  <pin name="In" x="-2.54" y="0" length="point" direction="pas" visible="pad"/>+  <wire x1="2.5400" y1="0.0000" x2="1.2700" y2="0.0000" width="0.254" layer="94"/>+  <pin name="Ext" x="2.54" y="0" length="point" direction="pas" rot="R180" visible="pad"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="925-126j-51p" prefix="J">+  <description>small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...)</description>+  <gates>+    <gate name="G$1" symbol="925-126j-51p" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="925-126j-51p">+      <connects>+        <connect gate="G$1" pin="In" pad="1"/>+        <connect gate="G$1" pin="Ext" pad="2 2@2"/>+      </connects>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="925-126J-51P" constant="no"/>+          <attribute name="MANUFACTURER" value="Amphenol RF" constant="no"/>+          <attribute name="DATASHEET" value="https://www.amphenolrf.com/en-us/assets/file/4065789372/" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/925-126j-51p" constant="no"/>+          <attribute name="MOUSER_PN" value="523-925-126J-51P" constant="no"/>+          <attribute name="DIGIKEY_PN" value="ARF2549-ND" constant="no"/>+        </technology>+      </technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file
README.md+37−1
@@ -1,3 +1,39 @@ # 925-126J-51P -Amphenol RF RF Coaxial Connectors (SMPM jack), 925-126j-51p. KiCad symbol, footprint and 3D as used on Adom boards.+::adom-verified{src="/adom/925-126j-51p/render/verification.json"}++**Amphenol RF** · RF Coaxial Connectors (SMPM jack) · 925-126j-51p++925-126J-51P from Amphenol RF, in a 925-126j-51p. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model extracted from the board STEP export, seated in the footprint frame). **Staged for validation: see the open items in the verification log above.**++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | In | passive | Centre contact (RF signal). [from symbol] |+| 2 | Ext | passive | Outer body / shield (RF ground). [from symbol] |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Amphenol RF |+| Package | 925-126j-51p |+| Category | Connectors |+| Pins | 2 |++## CAD++- Symbol: `925-126j-51p` (source library `Connector:Conn_Coaxial_Small`)+- Footprint: `coax:925-126j-51p`+- 3D model path in footprint: `${KIPRJMOD}/925-126j-51p.step`+- 3D files: `925-126j-51p.step` / `925-126j-51p.glb`.+- EAGLE/Fusion library: `925-126j-51p.lbr` (adom-lbr)++## Provenance++- **Datasheet:** [Amphenol RF datasheet](https://www.amphenolrf.com/en-us/assets/file/4065789372/) (sha256 `d0f7d88e2577de06`, retrieved 2026-10-08, tier: mfr)+- **CAD:** Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export.+- **Pins:** KiCad symbol from the source board.++[Datasheet PDF](docs/925-126j-51p-datasheet.pdf)
docs/925-126j-51p-datasheet.pdfadded
⋯ 1 unchanged line ⋯
docs/hero.pngadded
⋯ 1 unchanged line ⋯
package.jsonadded+120
@@ -0,0 +1,120 @@+{+  "slug": "925-126j-51p",+  "version": "0.1.0",+  "type": "component",+  "tags": [+    "component",+    "connectors",+    "925-126j-51p",+    "board-derived",+    "staged-for-validation"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "verification.json",+    "925-126j-51p.kicad_sym",+    "925-126j-51p.kicad_mod",+    "925-126j-51p.glb",+    "925-126j-51p.step",+    "925-126j-51p.lbr",+    "docs/hero.png",+    "docs/925-126j-51p-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "925-126J-51P",+    "manufacturer": "Amphenol RF",+    "package": "925-126j-51p",+    "pin_count": 2,+    "category": "Connectors",+    "subcategory": "RF Coaxial Connectors (SMPM jack)",+    "datasheet": "https://www.amphenolrf.com/en-us/assets/file/4065789372/",+    "parts": {+      "symbol": "925-126j-51p.kicad_sym",+      "footprint": "925-126j-51p.kicad_mod",+      "model_3d": "925-126j-51p.glb",+      "model_3d_plain": "925-126j-51p.glb",+      "model_3d_step": "925-126j-51p.step",+      "model_3d_step_plain": "925-126j-51p.step",+      "lbr": "925-126j-51p.lbr"+    },+    "distributor_links": {+      "digikey": {+        "part": "ARF2549-ND",+        "url": "https://www.digikey.com/en/products/detail/amphenol-rf/925-126J-51P/6211009"+      },+      "mouser": {+        "part": "523-925-126J-51P",+        "url": "https://www.mouser.com/en/ProductDetail/Amphenol-RF/925-126J-51P?qs=eFOtW6xYNWFRPF2LG3MgcQ%3D%3D"+      },+      "lcsc": false,+      "lcsc_note": "2026-10-08: no LCSC number on the source BOM and none found in the JLCPCB/LCSC catalogue for 925-126J-51P."+    },+    "pins": [+      {+        "number": "1",+        "name": "In",+        "type": "passive",+        "description": "Centre contact (RF signal). [from symbol]"+      },+      {+        "number": "2",+        "name": "Ext",+        "type": "passive",+        "description": "Outer body / shield (RF ground). [from symbol]"+      }+    ],+    "provenance": {+      "factory_chain": {+        "pipeline": "adom-parts (board-derived) 0.1",+        "pins": "KiCad symbol from the source board",+        "at": "2026-10-08"+      },+      "datasheet": {+        "url": "https://www.amphenolrf.com/en-us/assets/file/4065789372/",+        "pages": null,+        "sha256": "d0f7d88e2577de061e8cc87627ea089cfc48759d87fd4e1e6bc4bc5833e70f65",+        "source_tier": "mfr"+      },+      "cad": "Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export",+      "pins": {+        "total": 2,+        "described": 2,+        "cites_pages": false,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "925-126j-51p.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          8.7,+          4.6,+          2.8+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "ac070a7839401e7e9f0c42b2e7c2fecd3a733fdc43dc0dbe62491fa895e82200",+        "checked": "2026-10-08",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      }+    ]+  },+  "description": "Amphenol RF RF Coaxial Connectors (SMPM jack), 925-126j-51p. KiCad symbol, footprint and 3D as used on Adom boards."+}\ No newline at end of file
verification.jsonadded+81
@@ -0,0 +1,81 @@+{+ "schema": "adom/verification@1",+ "part": "925-126J-51P",+ "variants": [],+ "entries": [+  {+   "date": "2026-10-08",+   "by": {+    "name": "Claude (AI build)",+    "handle": "claude"+   },+   "status": "open",+   "title": "Automated build checks (awaiting human validation)",+   "scope": [+    "symbol",+    "footprint",+    "3d",+    "pins"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",+     "result": "pass"+    },+    {+     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",+     "result": "pass"+    },+    {+     "text": "adom-lbr generate + lint passed",+     "result": "pass"+    },+    {+     "text": "2 of 2 pins described",+     "result": "pass"+    },+    {+     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",+     "result": "note"+    }+   ],+   "evidence": [+    {+     "label": "datasheet",+     "href": "docs/925-126j-51p-datasheet.pdf"+    }+   ],+   "files": {+    "925-126j-51p.kicad_sym": "67134668b76176e094d23f622b687b87e6c3112d75527bf47d022a01d76856b9",+    "925-126j-51p.kicad_mod": "7898893b816ae7bdf84eee9fda650ae2ae912185b0cb964119ed7395e9308c0e",+    "925-126j-51p.step": "ac070a7839401e7e9f0c42b2e7c2fecd3a733fdc43dc0dbe62491fa895e82200"+   }+  },+  {+   "date": "2026-10-08",+   "by": {+    "name": "Claude (AI build)",+    "handle": "claude"+   },+   "status": "open",+   "title": "On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and v...",+   "scope": [+    "review"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and vice versa (swapped). This page uses the geometry placed for this reference designator; confirm it matches the Amphenol 925-126J-51P drawing.",+     "result": "note"+    }+   ],+   "evidence": [],+   "files": {}+  }+ ]+}\ No newline at end of file