main
History Download
Ray Publish 0.1.0 28cc6f8

878321420

MOLEX · Wire To Board Connector · SMD, P=2mm

878321420 from MOLEX, in a SMD, P=2mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Circuit 1 (bottom row in the top view).
2 2 passive Circuit 2 (top row in the top view).
3 3 passive Circuit 3 (bottom row in the top view).
4 4 passive Circuit 4 (top row in the top view).
5 5 passive Circuit 5 (bottom row in the top view).
6 6 passive Circuit 6 (top row in the top view).
7 7 passive Circuit 7 (bottom row in the top view).
8 8 passive Circuit 8 (top row in the top view).
9 9 passive Circuit 9 (bottom row in the top view).
10 10 passive Circuit 10 (top row in the top view).
11 11 passive Circuit 11 (bottom row in the top view).
12 12 passive Circuit 12 (top row in the top view).
13 13 passive Circuit 13 (bottom row in the top view).
14 14 passive Circuit 14 (top row in the top view).

Key specifications

Parameter Value
Manufacturer MOLEX
Package SMD, P=2mm
Category Connectors
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Coplanarity (G) G 0.15 mm 14 circuits; measured by resting the solder tail on a gauge surface 9
Pin square size tolerance -0.05 0.5 0.05 mm 0.50 SQ TYP ±0.05 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing NYLON black HOUSING & CAP: 30% GF, NYLON, UL94V-0, COLOR: BLACK 2
contacts PHOSPHOR BRONZE PIN: 0.50mm SQ. PHOSPHOR BRONZE 2

CAD (Adom-generated)

  • Symbol: 878321420
  • Footprint: Adom_Gen:Molex_878321420_71b0a6
  • 3D model: generated to fit the land (STEP)
  • 3D model files: 878321420-etched.step / 878321420-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 878321420.step / 878321420.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MOLEX datasheet (13 pp, sha256 56b7c73db1c26f22, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Molex SD-87832-0001 rev A25 sheet 8 (14 TO 50 CIRCUITS) RECOMMENDED PCB LAYOUT: pads 1.00 (TYP) wide x 2.75 (TYP) long at 2.00 pitch; 1.50 between the two pad rows (row centres 4.25 apart; 0.75 and 2.13 from the centre line); two Ø1.00 ±0.05 peg holes on the centre line, 1.00 inboard of the outer pad columns; C = 12.00 for 14 circuits (sheet 9 table, = 6 x 2.00). CKT #1 at the lower left and CKT #2 above it in the top view: odd circuits in the bottom row. Body A = 16.65, width 6.30, height 7.60 (without cap). (One of the three readings had the pads 1.50 long with rows 2.75 apart, mistaking the row gap for the pad length.)

Datasheet PDF