component
74VHCV541FT
Public Made by Adomby adom
TOSHIBA Buffer/Driver/Transceiver, TSSOP-20-175mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
main
Ray
74vhcv541ft: CAD wording names the Adom_Gen land, not KiCad official
7a257ba
74VHCV541FT
TOSHIBA · Buffer/Driver/Transceiver · TSSOP-20-175mil
74VHCV541FT from TOSHIBA, in a TSSOP-20-175mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{G}1 | input | Active-low output enable 1; when G1 or G2 is high the outputs are in the high-impedance state. |
| 2 | A1 | input | Schmitt-trigger data input 1; 0 to 5.5 V allowed regardless of supply voltage. |
| 3 | A2 | input | Schmitt-trigger data input 2; 0 to 5.5 V allowed regardless of supply voltage. |
| 4 | A3 | input | Schmitt-trigger data input 3; 0 to 5.5 V allowed regardless of supply voltage. |
| 5 | A4 | input | Schmitt-trigger data input 4; 0 to 5.5 V allowed regardless of supply voltage. |
| 6 | A5 | input | Schmitt-trigger data input 5; 0 to 5.5 V allowed regardless of supply voltage. |
| 7 | A6 | input | Schmitt-trigger data input 6; 0 to 5.5 V allowed regardless of supply voltage. |
| 8 | A7 | input | Schmitt-trigger data input 7; 0 to 5.5 V allowed regardless of supply voltage. |
| 9 | A8 | input | Schmitt-trigger data input 8; 0 to 5.5 V allowed regardless of supply voltage. |
| 10 | GND | power_in | Ground (0 V) reference. |
| 11 | Y8 | tri_state | Non-inverted 3-state output 8; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 12 | Y7 | tri_state | Non-inverted 3-state output 7; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 13 | Y6 | tri_state | Non-inverted 3-state output 6; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 14 | Y5 | tri_state | Non-inverted 3-state output 5; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 15 | Y4 | tri_state | Non-inverted 3-state output 4; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 16 | Y3 | tri_state | Non-inverted 3-state output 3; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 17 | Y2 | tri_state | Non-inverted 3-state output 2; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 18 | Y1 | tri_state | Non-inverted 3-state output 1; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 19 | ~{G}2 | input | Active-low output enable 2; when G1 or G2 is high the outputs are in the high-impedance state. |
| 20 | VCC | power_in | Supply voltage, operating range 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | TSSOP-20-175mil |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 7 | V | 3 | ||
| Input voltage | VIN | -0.5 | 7 | V | 3 | ||
| Output voltage | VOUT | -0.5 | 7 | V | Output in OFF state | 3 | |
| Input diode current | IIK | -50 | mA | -0.5 to VCC + 0.5 | 3 | ||
| Output diode current | IOK | -50 | 50 | mA | VOUT < GND, VOUT > VCC | 3 | |
| Output current | IOUT | -50 | 50 | mA | 3 | ||
| Power dissipation | PD | 180 | mW | Ta = -40 to 85 °C (Note 4) | 3 | ||
| VCC/ground current | ICC/IGND | -100 | 100 | mA | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Supply voltage | VCC | 1.8 | 5.5 | V | 3 | ||
| Input voltage | VIN | 0 | 5.5 | V | 3 | ||
| Output voltage | VOUT | 0 | 5.5 | V | Output in OFF state (Note 1) | 3 | |
| Output voltage | VOUT | 0 | V | High (H) or Low (L) state (Note 2); upper limit VCC | 3 | ||
| Operating temperature | Topr | -40 | 125 | °C | 3 | ||
| Input rise and fall times | dt/dv | 0 | 20 | ms/V | VCC = 3.3 ± 0.3 V; VCC = 5.0 ± 0.5 V | 3 | |
| Input rise and fall times | dt/dv | 0 | 1 | ms/V | VCC = 3.3 ± 0.3 V; VCC = 5.0 ± 0.5 V | 3 | |
| High-level output voltage | VOH | 1.7 | V | Ta = 25 °C; IOH = -50 µA; VCC = 1.8 V | 4 | ||
| High-level output voltage | VOH | 2.9 | V | Ta = 25 °C; IOH = -50 µA; VCC = 3.0 V | 4 | ||
| High-level output voltage | VOH | 4.4 | V | Ta = 25 °C; IOH = -50 µA; VCC = 4.5 V | 4 | ||
| High-level output voltage | VOH | 2.58 | V | Ta = 25 °C; IOH = -8 mA; VCC = 3.0 V | 4 | ||
| High-level output voltage | VOH | 3.94 | V | Ta = 25 °C; IOH = -8 mA; VCC = 4.5 V | 4 | ||
| Low-level output voltage | VOL | 0.1 | V | Ta = 25 °C; IOL = 50 µA; VCC = 1.8 V | 4 | ||
| Low-level output voltage | VOL | 0.36 | V | Ta = 25 °C; IOL = 8 mA; VCC = 3.0 V | 4 | ||
| Low-level output voltage | VOL | 0.44 | V | Ta = 25 °C; IOL = 8 mA; VCC = 4.5 V | 4 | ||
| 3-state output OFF-state leakage current | IOZ | -0.5 | 0.5 | µA | Ta = 25 °C; VCC = 1.8 to 5.5 V; VOUT = 0 to 5.5 V | 4 | |
| Power-OFF leakage current | IOFF | 0.5 | µA | Ta = 25 °C; VCC = 0 V; VIN/VOUT = 5.5 V | 4 | ||
| Input leakage current | IIN | -0.1 | 0.1 | µA | Ta = 25 °C; VCC = 0 to 5.5 V; VIN = 5.5 V or GND | 4 | |
| Quiescent supply current | ICC | 2 | µA | Ta = 25 °C; VCC = 5.5 V; VIN = VCC or GND | 4 | ||
| High-level output voltage | VOH | 1.7 | V | Ta = -40 to 85 °C; IOH = -50 µA; VCC = 1.8 V | 5 | ||
| High-level output voltage | VOH | 2.9 | V | Ta = -40 to 85 °C; IOH = -50 µA; VCC = 3.0 V | 5 | ||
| High-level output voltage | VOH | 4.4 | V | Ta = -40 to 85 °C; IOH = -50 µA; VCC = 4.5 V | 5 | ||
| High-level output voltage | VOH | 2.48 | V | Ta = -40 to 85 °C; IOH = -8 mA; VCC = 3.0 V | 5 | ||
| High-level output voltage | VOH | 3.8 | V | Ta = -40 to 85 °C; IOH = -8 mA; VCC = 4.5 V | 5 | ||
| Low-level output voltage | VOL | 0.1 | V | Ta = -40 to 85 °C; IOL = 50 µA; VCC = 1.8 V | 5 | ||
| Low-level output voltage | VOL | 0.44 | V | Ta = -40 to 85 °C; IOL = 8 mA; VCC = 3.0 V | 5 | ||
| Low-level output voltage | VOL | 0.55 | V | Ta = -40 to 85 °C; IOL = 8 mA; VCC = 4.5 V | 5 | ||
| 3-state output OFF-state leakage current | IOZ | -5 | 5 | µA | Ta = -40 to 85 °C; VCC = 1.8 to 5.5 V; VOUT = 0 to 5.5 V | 5 | |
| Power-OFF leakage current | IOFF | 5 | µA | Ta = -40 to 85 °C; VCC = 0 V; VIN/VOUT = 5.5 V | 5 | ||
| Input leakage current | IIN | -1 | 1 | µA | Ta = -40 to 85 °C; VCC = 0 to 5.5 V; VIN = 5.5 V or GND | 5 | |
| Quiescent supply current | ICC | 20 | µA | Ta = -40 to 85 °C; VCC = 5.5 V; VIN = VCC or GND | 5 | ||
| High-level output voltage | VOH | 1.7 | V | Ta = -40 to 125 °C; IOH = -50 µA; VCC = 1.8 V | 6 | ||
| High-level output voltage | VOH | 2.9 | V | Ta = -40 to 125 °C; IOH = -50 µA; VCC = 3.0 V | 6 | ||
| High-level output voltage | VOH | 4.4 | V | Ta = -40 to 125 °C; IOH = -50 µA; VCC = 4.5 V | 6 | ||
| High-level output voltage | VOH | 2.4 | V | Ta = -40 to 125 °C; IOH = -8 mA; VCC = 3.0 V | 6 | ||
| High-level output voltage | VOH | 3.7 | V | Ta = -40 to 125 °C; IOH = -8 mA; VCC = 4.5 V | 6 | ||
| Low-level output voltage | VOL | 0.1 | V | Ta = -40 to 125 °C; IOL = 50 µA; VCC = 1.8 V | 6 | ||
| Low-level output voltage | VOL | 0.55 | V | Ta = -40 to 125 °C; IOL = 8 mA; VCC = 3.0 V | 6 | ||
| Low-level output voltage | VOL | 0.65 | V | Ta = -40 to 125 °C; IOL = 8 mA; VCC = 4.5 V | 6 | ||
| 3-state output OFF-state leakage current | IOZ | -20 | 20 | µA | Ta = -40 to 125 °C; VCC = 1.8 to 5.5 V; VOUT = 0 to 5.5 V | 6 | |
| Power-OFF leakage current | IOFF | 20 | µA | Ta = -40 to 125 °C; VCC = 0 V; VIN/VOUT = 5.5 V | 6 | ||
| Input leakage current | IIN | -2 | 2 | µA | Ta = -40 to 125 °C; VCC = 0 to 5.5 V; VIN = 5.5 V or GND | 6 | |
| Quiescent supply current | ICC | 40 | µA | Ta = -40 to 125 °C; VCC = 5.5 V; VIN = VCC or GND | 6 | ||
| Minimum high-level dynamic input voltage | VIHD | 3.5 | V | Ta = 25 °C; CL = 50 pF; VCC = 5.0 V | 9 | ||
| Maximum low-level dynamic input voltage | VILD | 1.5 | V | Ta = 25 °C; CL = 50 pF; VCC = 5.0 V | 9 |
CAD (Adom-generated)
- Symbol:
74VHCV541FT - Footprint:
Adom_Gen:Toshiba_74_cabc70 - 3D model: generated to fit the land (STEP)
- 3D model files:
74vhcv541ft-etched.step/74vhcv541ft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74vhcv541ft.step/74vhcv541ft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (11 pp, sha256
9bab6cba5d2e40cd, retrieved 2026-11-09, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# 74VHCV541FT
**TOSHIBA** · Buffer/Driver/Transceiver · TSSOP-20-175mil
74VHCV541FT from TOSHIBA, in a TSSOP-20-175mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{G}1 | input | Active-low output enable 1; when G1 or G2 is high the outputs are in the high-impedance state. |
| 2 | A1 | input | Schmitt-trigger data input 1; 0 to 5.5 V allowed regardless of supply voltage. |
| 3 | A2 | input | Schmitt-trigger data input 2; 0 to 5.5 V allowed regardless of supply voltage. |
| 4 | A3 | input | Schmitt-trigger data input 3; 0 to 5.5 V allowed regardless of supply voltage. |
| 5 | A4 | input | Schmitt-trigger data input 4; 0 to 5.5 V allowed regardless of supply voltage. |
| 6 | A5 | input | Schmitt-trigger data input 5; 0 to 5.5 V allowed regardless of supply voltage. |
| 7 | A6 | input | Schmitt-trigger data input 6; 0 to 5.5 V allowed regardless of supply voltage. |
| 8 | A7 | input | Schmitt-trigger data input 7; 0 to 5.5 V allowed regardless of supply voltage. |
| 9 | A8 | input | Schmitt-trigger data input 8; 0 to 5.5 V allowed regardless of supply voltage. |
| 10 | GND | power_in | Ground (0 V) reference. |
| 11 | Y8 | tri_state | Non-inverted 3-state output 8; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 12 | Y7 | tri_state | Non-inverted 3-state output 7; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 13 | Y6 | tri_state | Non-inverted 3-state output 6; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 14 | Y5 | tri_state | Non-inverted 3-state output 5; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 15 | Y4 | tri_state | Non-inverted 3-state output 4; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 16 | Y3 | tri_state | Non-inverted 3-state output 3; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 17 | Y2 | tri_state | Non-inverted 3-state output 2; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 18 | Y1 | tri_state | Non-inverted 3-state output 1; high-impedance when G1 or G2 is high, 16 mA min drive at VCC = 4.5 V. |
| 19 | ~{G}2 | input | Active-low output enable 2; when G1 or G2 is high the outputs are in the high-impedance state. |
| 20 | VCC | power_in | Supply voltage, operating range 1.8 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | TSSOP-20-175mil |
| Category | Logic ICs |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 7 | V | | 3 |
| Input voltage | VIN | -0.5 | | 7 | V | | 3 |
| Output voltage | VOUT | -0.5 | | 7 | V | Output in OFF state | 3 |
| Input diode current | IIK | -50 | | | mA | -0.5 to VCC + 0.5 | 3 |
| Output diode current | IOK | -50 | | 50 | mA | VOUT < GND, VOUT > VCC | 3 |
| Output current | IOUT | -50 | | 50 | mA | | 3 |
| Power dissipation | PD | | | 180 | mW | Ta = -40 to 85 °C (Note 4) | 3 |
| VCC/ground current | ICC/IGND | -100 | | 100 | mA | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Supply voltage | VCC | 1.8 | | 5.5 | V | | 3 |
| Input voltage | VIN | 0 | | 5.5 | V | | 3 |
| Output voltage | VOUT | 0 | | 5.5 | V | Output in OFF state (Note 1) | 3 |
| Output voltage | VOUT | 0 | | | V | High (H) or Low (L) state (Note 2); upper limit VCC | 3 |
| Operating temperature | Topr | -40 | | 125 | °C | | 3 |
| Input rise and fall times | dt/dv | 0 | | 20 | ms/V | VCC = 3.3 ± 0.3 V; VCC = 5.0 ± 0.5 V | 3 |
| Input rise and fall times | dt/dv | 0 | | 1 | ms/V | VCC = 3.3 ± 0.3 V; VCC = 5.0 ± 0.5 V | 3 |
| High-level output voltage | VOH | 1.7 | | | V | Ta = 25 °C; IOH = -50 µA; VCC = 1.8 V | 4 |
| High-level output voltage | VOH | 2.9 | | | V | Ta = 25 °C; IOH = -50 µA; VCC = 3.0 V | 4 |
| High-level output voltage | VOH | 4.4 | | | V | Ta = 25 °C; IOH = -50 µA; VCC = 4.5 V | 4 |
| High-level output voltage | VOH | 2.58 | | | V | Ta = 25 °C; IOH = -8 mA; VCC = 3.0 V | 4 |
| High-level output voltage | VOH | 3.94 | | | V | Ta = 25 °C; IOH = -8 mA; VCC = 4.5 V | 4 |
| Low-level output voltage | VOL | | | 0.1 | V | Ta = 25 °C; IOL = 50 µA; VCC = 1.8 V | 4 |
| Low-level output voltage | VOL | | | 0.36 | V | Ta = 25 °C; IOL = 8 mA; VCC = 3.0 V | 4 |
| Low-level output voltage | VOL | | | 0.44 | V | Ta = 25 °C; IOL = 8 mA; VCC = 4.5 V | 4 |
| 3-state output OFF-state leakage current | IOZ | -0.5 | | 0.5 | µA | Ta = 25 °C; VCC = 1.8 to 5.5 V; VOUT = 0 to 5.5 V | 4 |
| Power-OFF leakage current | IOFF | | | 0.5 | µA | Ta = 25 °C; VCC = 0 V; VIN/VOUT = 5.5 V | 4 |
| Input leakage current | IIN | -0.1 | | 0.1 | µA | Ta = 25 °C; VCC = 0 to 5.5 V; VIN = 5.5 V or GND | 4 |
| Quiescent supply current | ICC | | | 2 | µA | Ta = 25 °C; VCC = 5.5 V; VIN = VCC or GND | 4 |
| High-level output voltage | VOH | 1.7 | | | V | Ta = -40 to 85 °C; IOH = -50 µA; VCC = 1.8 V | 5 |
| High-level output voltage | VOH | 2.9 | | | V | Ta = -40 to 85 °C; IOH = -50 µA; VCC = 3.0 V | 5 |
| High-level output voltage | VOH | 4.4 | | | V | Ta = -40 to 85 °C; IOH = -50 µA; VCC = 4.5 V | 5 |
| High-level output voltage | VOH | 2.48 | | | V | Ta = -40 to 85 °C; IOH = -8 mA; VCC = 3.0 V | 5 |
| High-level output voltage | VOH | 3.8 | | | V | Ta = -40 to 85 °C; IOH = -8 mA; VCC = 4.5 V | 5 |
| Low-level output voltage | VOL | | | 0.1 | V | Ta = -40 to 85 °C; IOL = 50 µA; VCC = 1.8 V | 5 |
| Low-level output voltage | VOL | | | 0.44 | V | Ta = -40 to 85 °C; IOL = 8 mA; VCC = 3.0 V | 5 |
| Low-level output voltage | VOL | | | 0.55 | V | Ta = -40 to 85 °C; IOL = 8 mA; VCC = 4.5 V | 5 |
| 3-state output OFF-state leakage current | IOZ | -5 | | 5 | µA | Ta = -40 to 85 °C; VCC = 1.8 to 5.5 V; VOUT = 0 to 5.5 V | 5 |
| Power-OFF leakage current | IOFF | | | 5 | µA | Ta = -40 to 85 °C; VCC = 0 V; VIN/VOUT = 5.5 V | 5 |
| Input leakage current | IIN | -1 | | 1 | µA | Ta = -40 to 85 °C; VCC = 0 to 5.5 V; VIN = 5.5 V or GND | 5 |
| Quiescent supply current | ICC | | | 20 | µA | Ta = -40 to 85 °C; VCC = 5.5 V; VIN = VCC or GND | 5 |
| High-level output voltage | VOH | 1.7 | | | V | Ta = -40 to 125 °C; IOH = -50 µA; VCC = 1.8 V | 6 |
| High-level output voltage | VOH | 2.9 | | | V | Ta = -40 to 125 °C; IOH = -50 µA; VCC = 3.0 V | 6 |
| High-level output voltage | VOH | 4.4 | | | V | Ta = -40 to 125 °C; IOH = -50 µA; VCC = 4.5 V | 6 |
| High-level output voltage | VOH | 2.4 | | | V | Ta = -40 to 125 °C; IOH = -8 mA; VCC = 3.0 V | 6 |
| High-level output voltage | VOH | 3.7 | | | V | Ta = -40 to 125 °C; IOH = -8 mA; VCC = 4.5 V | 6 |
| Low-level output voltage | VOL | | | 0.1 | V | Ta = -40 to 125 °C; IOL = 50 µA; VCC = 1.8 V | 6 |
| Low-level output voltage | VOL | | | 0.55 | V | Ta = -40 to 125 °C; IOL = 8 mA; VCC = 3.0 V | 6 |
| Low-level output voltage | VOL | | | 0.65 | V | Ta = -40 to 125 °C; IOL = 8 mA; VCC = 4.5 V | 6 |
| 3-state output OFF-state leakage current | IOZ | -20 | | 20 | µA | Ta = -40 to 125 °C; VCC = 1.8 to 5.5 V; VOUT = 0 to 5.5 V | 6 |
| Power-OFF leakage current | IOFF | | | 20 | µA | Ta = -40 to 125 °C; VCC = 0 V; VIN/VOUT = 5.5 V | 6 |
| Input leakage current | IIN | -2 | | 2 | µA | Ta = -40 to 125 °C; VCC = 0 to 5.5 V; VIN = 5.5 V or GND | 6 |
| Quiescent supply current | ICC | | | 40 | µA | Ta = -40 to 125 °C; VCC = 5.5 V; VIN = VCC or GND | 6 |
| Minimum high-level dynamic input voltage | VIHD | 3.5 | | | V | Ta = 25 °C; CL = 50 pF; VCC = 5.0 V | 9 |
| Maximum low-level dynamic input voltage | VILD | | | 1.5 | V | Ta = 25 °C; CL = 50 pF; VCC = 5.0 V | 9 |
## CAD (Adom-generated)
- Symbol: `74VHCV541FT`
- Footprint: `Adom_Gen:Toshiba_74_cabc70`
- 3D model: generated to fit the land (STEP)
- 3D model files: `74vhcv541ft-etched.step` / `74vhcv541ft-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74vhcv541ft.step` / `74vhcv541ft.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TOSHIBA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923833483210752) (11 pp, sha256 `9bab6cba5d2e40cd`, retrieved 2026-11-09, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/74vhcv541ft-datasheet.pdf)