3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74VHC373FT
TOSHIBA · Latches · TSSOP-20
74VHC373FT from TOSHIBA, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{OE} | input | Active-low output enable; when HIGH all eight Q outputs are forced to high-impedance regardless of LE or D; VIH min 0.7×VCC, VIL max 0.3×VCC. Active low (overbar as printed). |
| 2 | Q0 | tri_state | 3-state latch output bit 0; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 3 | D0 | input | Data input bit 0; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 4 | D1 | input | Data input bit 1; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 5 | Q1 | tri_state | 3-state latch output bit 1; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 6 | Q2 | tri_state | 3-state latch output bit 2; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 7 | D2 | input | Data input bit 2; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 8 | D3 | input | Data input bit 3; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 9 | Q3 | tri_state | 3-state latch output bit 3; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 10 | GND | power_in | Ground supply reference, 0 V. |
| 11 | LE | input | Latch enable input; when HIGH Q outputs follow D inputs transparently; when LOW Q outputs hold last state; minimum pulse width 5.0 ns at VCC=3.3 V. |
| 12 | Q4 | tri_state | 3-state latch output bit 4; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 13 | D4 | input | Data input bit 4; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 14 | D5 | input | Data input bit 5; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 15 | Q5 | tri_state | 3-state latch output bit 5; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 16 | Q6 | tri_state | 3-state latch output bit 6; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 17 | D6 | input | Data input bit 6; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 18 | D7 | input | Data input bit 7; latched on falling edge of LE; setup time min 4.0 ns, hold time min 1.0 ns at VCC=5.0 V. |
| 19 | Q7 | tri_state | 3-state latch output bit 7; VOH min 2.58 V (VCC=3.0 V, IOH=−4 mA), VOL max 0.36 V (VCC=3.0 V, IOL=4 mA); propagation delay from D max 11.4 ns at VCC=3.3 V, CL=50 pF. |
| 20 | VCC | power_in | Positive supply voltage; operating range 2.0 V to 5.5 V, absolute maximum 7.0 V; ICC max 4.0 µA at Ta=25 °C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2 | 5.5 | V | 4 | ||
| Input voltage | VIN | 0 | 5.5 | V | 4 | ||
| Output voltage | VOUT | 0 | V | max = VCC | 4 | ||
| Operating temperature | Topr | -40 | 125 | °C | 4 | ||
| Input rise and fall times | dt/dv | 0 | 100 | ns/V | VCC = 3.3 ± 0.3 V | 4 | |
| Input rise and fall times | dt/dv | 0 | 20 | ns/V | VCC = 5.0 ± 0.5 V | 4 | |
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input voltage | VIN | -0.5 | 7 | V | 4 | ||
| Output voltage | VOUT | -0.5 | V | max = VCC + 0.5 | 4 | ||
| Input diode current | IIK | -20 | mA | 4 | |||
| Output diode current | IOK | -20 | 20 | mA | 4 | ||
| Output current | IOUT | -25 | 25 | mA | 4 | ||
| VCC/ground current | ICC | -75 | 75 | mA | 4 | ||
| Power dissipation | PD | 180 | mW | Ta = -40 to 85 °C; derate -3.25 mW/°C from 85 to 125 °C to 50 mW | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| High-level input voltage | VIH | 1.5 | V | VCC = 2.0 V; Ta = 25 °C | 5 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2.0 V; Ta = 25 °C | 5 | ||
| High-level output voltage | VOH | 1.9 | 2 | V | VCC = 2.0 V; IOH = -50 µA; Ta = 25 °C | 5 | |
| High-level output voltage | VOH | 2.9 | 3 | V | VCC = 3.0 V; IOH = -50 µA; Ta = 25 °C | 5 | |
| High-level output voltage | VOH | 4.4 | 4.5 | V | VCC = 4.5 V; IOH = -50 µA; Ta = 25 °C | 5 | |
| High-level output voltage | VOH | 2.58 | V | VCC = 3.0 V; IOH = -4 mA; Ta = 25 °C | 5 | ||
| High-level output voltage | VOH | 3.94 | V | VCC = 4.5 V; IOH = -8 mA; Ta = 25 °C | 5 | ||
| Low-level output voltage | VOL | 0 | 0.1 | V | VCC = 2.0 V; IOL = 50 µA; Ta = 25 °C | 5 | |
| Low-level output voltage | VOL | 0.36 | V | VCC = 3.0 V; IOL = 4 mA; Ta = 25 °C | 5 | ||
| 3-state output OFF-state leakage current | IOZ | -0.25 | 0.25 | µA | VCC = 5.5 V; VOUT = VCC or GND; Ta = 25 °C | 5 | |
| Input leakage current | IIN | -0.1 | 0.1 | µA | VCC = 0 to 5.5 V; VIN = 5.5 V or GND; Ta = 25 °C | 5 | |
| Quiescent supply current | ICC | 4 | µA | VCC = 5.5 V; VIN = VCC or GND; Ta = 25 °C | 5 | ||
| High-level input voltage | VIH | 1.5 | V | VCC = 2.0 V; Ta = -40 to 125 °C | 6 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2.0 V; Ta = -40 to 125 °C | 6 | ||
| High-level output voltage | VOH | 1.9 | V | VCC = 2.0 V; IOH = -50 µA; Ta = -40 to 125 °C | 6 | ||
| High-level output voltage | VOH | 2.9 | V | VCC = 3.0 V; IOH = -50 µA; Ta = -40 to 125 °C | 6 | ||
| High-level output voltage | VOH | 4.4 | V | VCC = 4.5 V; IOH = -50 µA; Ta = -40 to 125 °C | 6 | ||
| High-level output voltage | VOH | 2.4 | V | VCC = 3.0 V; IOH = -4 mA; Ta = -40 to 125 °C | 6 | ||
| High-level output voltage | VOH | 3.7 | V | VCC = 4.5 V; IOH = -8 mA; Ta = -40 to 125 °C | 6 | ||
| Low-level output voltage | VOL | 0.1 | V | VCC = 2.0 V; IOL = 50 µA; Ta = -40 to 125 °C | 6 | ||
| Low-level output voltage | VOL | 0.55 | V | VCC = 3.0 V; IOL = 4 mA; Ta = -40 to 125 °C | 6 | ||
| 3-state output OFF-state leakage current | IOZ | -10 | 10 | µA | VCC = 5.5 V; VOUT = VCC or GND; Ta = -40 to 125 °C | 6 | |
| Input leakage current | IIN | -2 | 2 | µA | VCC = 0 to 5.5 V; VIN = 5.5 V or GND; Ta = -40 to 125 °C | 6 | |
| Quiescent supply current | ICC | 80 | µA | VCC = 5.5 V; VIN = VCC or GND; Ta = -40 to 125 °C | 6 | ||
| Minimum pulse width (LE) | tw(H) | 5 | ns | VCC = 3.3 ± 0.3 V; tr = tf = 3 ns; Ta = 25 °C | 7 | ||
| Minimum setup time | tS | 4 | ns | VCC = 3.3 ± 0.3 V; tr = tf = 3 ns; Ta = 25 °C | 7 | ||
| Minimum hold time | tH | 1 | ns | VCC = 3.3 ± 0.3 V; tr = tf = 3 ns; Ta = 25 °C | 7 | ||
| Propagation delay time (LE-Q) | tPLH,tPHL | 7 | 11 | ns | VCC = 3.3 ± 0.3 V; CL = 15 pF; RL = 1 kΩ; Ta = 25 °C | 8 | |
| Propagation delay time (LE-Q) | tPLH,tPHL | 9.5 | 14.5 | ns | VCC = 5.0 ± 0.5 V; CL = 50 pF; RL = 1 kΩ; Ta = 25 °C | 8 | |
| Propagation delay time (D-Q) | tPLH,tPHL | 4.9 | 7.2 | ns | VCC = 3.3 ± 0.3 V; CL = 15 pF; RL = 1 kΩ; Ta = 25 °C | 8 | |
| Propagation delay time (D-Q) | tPLH,tPHL | 6.4 | 9.2 | ns | VCC = 5.0 ± 0.5 V; CL = 50 pF; RL = 1 kΩ; Ta = 25 °C | 8 | |
| Input capacitance | CIN | 10 | pF | Ta = 25 °C | 8 | ||
| Propagation delay time (LE-Q) | tPLH,tPHL | 1 | 15 | ns | VCC = 3.3 ± 0.3 V; CL = 15 pF; RL = 1 kΩ; Ta = -40 to 125 °C | 9 | |
| Propagation delay time (LE-Q) | tPLH,tPHL | 1 | 18.5 | ns | VCC = 5.0 ± 0.5 V; CL = 50 pF; RL = 1 kΩ; Ta = -40 to 125 °C | 9 | |
| Propagation delay time (D-Q) | tPLH,tPHL | 1 | 9.5 | ns | VCC = 3.3 ± 0.3 V; CL = 15 pF; RL = 1 kΩ; Ta = -40 to 125 °C | 9 | |
| Propagation delay time (D-Q) | tPLH,tPHL | 1 | 11.5 | ns | VCC = 5.0 ± 0.5 V; CL = 50 pF; RL = 1 kΩ; Ta = -40 to 125 °C | 9 |
CAD (KiCad official)
- Symbol:
74VHC373FT - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
74vhc373ft-etched.step/74vhc373ft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74vhc373ft.step/74vhc373ft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (12 pp, sha256
235b55805011f86d, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).