component
74LVC4066PW-Q100J
Public Made by Adomby adom
Nexperia Analog Switches, Multiplexers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
74LVC4066PW-Q100J
Nexperia · Analog Switches, Multiplexers · TSSOP-14
74LVC4066PW-Q100J from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1Y | passive | Independent input/output terminal of switch 1; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 2 | 1Z | passive | Independent output/input terminal of switch 1; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 3 | 2Z | passive | Independent output/input terminal of switch 2; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 4 | 2Y | passive | Independent input/output terminal of switch 2; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 5 | 2E | input | Active-HIGH enable input for switch 2; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 6 | 3E | input | Active-HIGH enable input for switch 3; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 7 | GND | power_in | Ground (0 V) reference for all device voltages; this is the device ground pin. |
| 8 | 3Y | passive | Independent input/output terminal of switch 3; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 9 | 3Z | passive | Independent output/input terminal of switch 3; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 10 | 4Z | passive | Independent output/input terminal of switch 4; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 11 | 4Y | passive | Independent input/output terminal of switch 4; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 12 | 4E | input | Active-HIGH enable input for switch 4; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 13 | 1E | input | Active-HIGH enable input for switch 1; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 14 | VCC | power_in | Supply voltage; recommended range 1.65 V to 5.5 V with an absolute maximum of +6.5 V referenced to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-14 |
| Category | Interface |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 6.5 | V | 4 | ||
| input voltage | VI | -0.5 | 6.5 | V | 4 | ||
| input clamping current | IIK | -50 | mA | VI < -0.5 V or VI < VCC + 0.5 V | 4 | ||
| switch clamping current | ISK | -50 | 50 | mA | VI < -0.5 V or VI < VCC + 0.5 V | 4 | |
| switch voltage | VSW | -0.5 | 6.5 | V | enable and disable mode | 4 | |
| switch current | ISW | -50 | 50 | mA | -0.5 < VSW < VCC + 0.5 V | 4 | |
| supply current | ICC | 100 | mA | 4 | |||
| ground current | IGND | -100 | mA | 4 | |||
| storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| supply voltage | VCC | 1.65 | 5.5 | V | 4 | ||
| input voltage | VI | 0 | 5.5 | V | 4 | ||
| switch voltage | VSW | 0 | V | 4 | |||
| ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 20 | ns/V | VCC = 1.65 V to 2.7 V; applies to control signal levels | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 10 | ns/V | VCC = 2.7 V to 5.5 V; applies to control signal levels | 4 | ||
| HIGH-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| HIGH-level input voltage | VIH | 2 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| LOW-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| LOW-level input voltage | VIL | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| input leakage current | II | -20 | 0.1 | 20 | μA | pin nE; VCC = 5.5 V; VI = 5.5 V or GND | 5 |
| OFF-state leakage current | IS(OFF) | -20 | 0.1 | 20 | μA | /VSW/ = VCC - GND; VCC = 5.5 V | 5 |
| ON-state leakage current | IS(ON) | -20 | 0.1 | 20 | μA | /VSW/ = VCC - GND; VCC = 5.5 V | 5 |
| supply current | ICC | 0.1 | 40 | μA | VI = VCC or GND; VSW = GND or VCC; VCC = 5.5 V | 5 | |
| additional supply current | ΔICC | 5 | 5000 | μA | pin nE; VI = VCC - 0.6 V; VCC = 5.5 V; VSW = GND or VCC | 5 | |
| ON resistance (peak) | RON(peak) | 34 | 195 | Ω | VI = GND to VCC; ISW = 4 mA; VCC = 1.65 V to 1.95 V | 6 | |
| ON resistance (peak) | RON(peak) | 12 | 45 | Ω | VI = GND to VCC; ISW = 8 mA; VCC = 2.3 V to 2.7 V | 6 | |
| ON resistance (peak) | RON(peak) | 10.4 | 38 | Ω | VI = GND to VCC; ISW = 12 mA; VCC = 2.7 V | 6 | |
| ON resistance (peak) | RON(peak) | 7.8 | 30 | Ω | VI = GND to VCC; ISW = 24 mA; VCC = 3 V to 3.6 V | 6 | |
| ON resistance (peak) | RON(peak) | 6.2 | 23 | Ω | VI = GND to VCC; ISW = 32 mA; VCC = 4.5 V to 5.5 V | 6 | |
| ON resistance (peak) | RON(peak) | 8.2 | 27 | Ω | VI = GND; ISW = 4 mA; VCC = 1.65 V to 1.95 V | 6 | |
| ON resistance (peak) | RON(peak) | 7.1 | 24 | Ω | VI = GND; ISW = 8 mA; VCC = 2.3 V to 2.7 V | 6 | |
| ON resistance (peak) | RON(peak) | 6.9 | 21 | Ω | VI = GND; ISW = 12 mA; VCC = 2.7 V | 6 | |
| ON resistance (peak) | RON(peak) | 6.5 | 18 | Ω | VI = GND; ISW = 24 mA; VCC = 3 V to 3.6 V | 6 | |
| ON resistance (peak) | RON(peak) | 5.8 | 15 | Ω | VI = GND; ISW = 32 mA; VCC = 4.5 V to 5.5 V | 6 | |
| ON resistance (rail) | RON(rail) | 10.4 | 45 | Ω | VI = VCC; ISW = 4 mA; VCC = 1.65 V to 1.95 V | 6 | |
| ON resistance (rail) | RON(rail) | 7.6 | 30 | Ω | VI = VCC; ISW = 8 mA; VCC = 2.3 V to 2.7 V | 6 | |
| ON resistance (rail) | RON(rail) | 7 | 27 | Ω | VI = VCC; ISW = 12 mA; VCC = 2.7 V | 6 | |
| ON resistance (rail) | RON(rail) | 6.1 | 23 | Ω | VI = VCC; ISW = 24 mA; VCC = 3 V to 3.6 V | 6 | |
| ON resistance (rail) | RON(rail) | 4.9 | 15 | Ω | VI = VCC; ISW = 32 mA; VCC = 4.5 V to 5.5 V | 6 | |
| propagation delay nY to nZ or nZ to nY | tpd | 0.8 | 3 | ns | VCC = 1.65 V to 1.95 V | 9 | |
| propagation delay nY to nZ or nZ to nY | tpd | 0.4 | 2 | ns | VCC = 2.3 V to 2.7 V | 9 | |
| propagation delay nY to nZ or nZ to nY | tpd | 0.4 | 1.5 | ns | VCC = 2.7 V | 9 | |
| propagation delay nY to nZ or nZ to nY | tpd | 0.3 | 1.5 | ns | VCC = 3.0 V to 3.6 V | 9 | |
| propagation delay nY to nZ or nZ to nY | tpd | 0.2 | 1 | ns | VCC = 4.5 V to 5.5 V | 9 | |
| enable time nE to nY or nZ | ten | 1 | 5.3 | 12.5 | ns | VCC = 1.65 V to 1.95 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 3 | 7 | ns | VCC = 2.3 V to 2.7 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 2.6 | 6.5 | ns | VCC = 2.7 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 2.5 | 5.5 | ns | VCC = 3.0 V to 3.6 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 1.9 | 5 | ns | VCC = 4.5 V to 5.5 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 4.2 | 11.5 | ns | VCC = 1.65 V to 1.95 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 2.4 | 7 | ns | VCC = 2.3 V to 2.7 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 3.6 | 8.5 | ns | VCC = 2.7 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 3.4 | 7.5 | ns | VCC = 3.0 V to 3.6 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 2.5 | 6.5 | ns | VCC = 4.5 V to 5.5 V | 9 |
CAD (KiCad official)
- Symbol:
74LVC4066PW-Q100J - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
74lvc4066pw-q100j-etched.step/74lvc4066pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lvc4066pw-q100j.step/74lvc4066pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (20 pp, sha256
246d669bf5145318, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74LVC4066PW-Q100J
**Nexperia** · Analog Switches, Multiplexers · TSSOP-14
74LVC4066PW-Q100J from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1Y | passive | Independent input/output terminal of switch 1; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 2 | 1Z | passive | Independent output/input terminal of switch 1; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 3 | 2Z | passive | Independent output/input terminal of switch 2; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 4 | 2Y | passive | Independent input/output terminal of switch 2; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 5 | 2E | input | Active-HIGH enable input for switch 2; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 6 | 3E | input | Active-HIGH enable input for switch 3; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 7 | GND | power_in | Ground (0 V) reference for all device voltages; this is the device ground pin. |
| 8 | 3Y | passive | Independent input/output terminal of switch 3; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 9 | 3Z | passive | Independent output/input terminal of switch 3; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 10 | 4Z | passive | Independent output/input terminal of switch 4; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 11 | 4Y | passive | Independent input/output terminal of switch 4; switch voltage must stay within 0 V to VCC in recommended operation (absolute limit -0.5 V to +6.5 V) and switch current is limited to ±50 mA absolute maximum. |
| 12 | 4E | input | Active-HIGH enable input for switch 4; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 13 | 1E | input | Active-HIGH enable input for switch 1; the switch is ON when HIGH and OFF when LOW, and the input accepts voltages up to 5 V. |
| 14 | VCC | power_in | Supply voltage; recommended range 1.65 V to 5.5 V with an absolute maximum of +6.5 V referenced to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-14 |
| Category | Interface |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | | 6.5 | V | | 4 |
| input voltage | VI | -0.5 | | 6.5 | V | | 4 |
| input clamping current | IIK | -50 | | | mA | VI < -0.5 V or VI < VCC + 0.5 V | 4 |
| switch clamping current | ISK | -50 | | 50 | mA | VI < -0.5 V or VI < VCC + 0.5 V | 4 |
| switch voltage | VSW | -0.5 | | 6.5 | V | enable and disable mode | 4 |
| switch current | ISW | -50 | | 50 | mA | -0.5 < VSW < VCC + 0.5 V | 4 |
| supply current | ICC | | | 100 | mA | | 4 |
| ground current | IGND | -100 | | | mA | | 4 |
| storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| total power dissipation | Ptot | | | 500 | mW | Tamb = -40 °C to +125 °C | 4 |
| supply voltage | VCC | 1.65 | | 5.5 | V | | 4 |
| input voltage | VI | 0 | | 5.5 | V | | 4 |
| switch voltage | VSW | 0 | | | V | | 4 |
| ambient temperature | Tamb | -40 | | 125 | °C | | 4 |
| input transition rise and fall rate | Δt/ΔV | | | 20 | ns/V | VCC = 1.65 V to 2.7 V; applies to control signal levels | 4 |
| input transition rise and fall rate | Δt/ΔV | | | 10 | ns/V | VCC = 2.7 V to 5.5 V; applies to control signal levels | 4 |
| HIGH-level input voltage | VIH | 1.7 | | | V | VCC = 2.3 V to 2.7 V | 5 |
| HIGH-level input voltage | VIH | 2 | | | V | VCC = 2.7 V to 3.6 V | 5 |
| LOW-level input voltage | VIL | | | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 |
| LOW-level input voltage | VIL | | | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 |
| input leakage current | II | -20 | 0.1 | 20 | μA | pin nE; VCC = 5.5 V; VI = 5.5 V or GND | 5 |
| OFF-state leakage current | IS(OFF) | -20 | 0.1 | 20 | μA | /VSW/ = VCC - GND; VCC = 5.5 V | 5 |
| ON-state leakage current | IS(ON) | -20 | 0.1 | 20 | μA | /VSW/ = VCC - GND; VCC = 5.5 V | 5 |
| supply current | ICC | | 0.1 | 40 | μA | VI = VCC or GND; VSW = GND or VCC; VCC = 5.5 V | 5 |
| additional supply current | ΔICC | | 5 | 5000 | μA | pin nE; VI = VCC - 0.6 V; VCC = 5.5 V; VSW = GND or VCC | 5 |
| ON resistance (peak) | RON(peak) | | 34 | 195 | Ω | VI = GND to VCC; ISW = 4 mA; VCC = 1.65 V to 1.95 V | 6 |
| ON resistance (peak) | RON(peak) | | 12 | 45 | Ω | VI = GND to VCC; ISW = 8 mA; VCC = 2.3 V to 2.7 V | 6 |
| ON resistance (peak) | RON(peak) | | 10.4 | 38 | Ω | VI = GND to VCC; ISW = 12 mA; VCC = 2.7 V | 6 |
| ON resistance (peak) | RON(peak) | | 7.8 | 30 | Ω | VI = GND to VCC; ISW = 24 mA; VCC = 3 V to 3.6 V | 6 |
| ON resistance (peak) | RON(peak) | | 6.2 | 23 | Ω | VI = GND to VCC; ISW = 32 mA; VCC = 4.5 V to 5.5 V | 6 |
| ON resistance (peak) | RON(peak) | | 8.2 | 27 | Ω | VI = GND; ISW = 4 mA; VCC = 1.65 V to 1.95 V | 6 |
| ON resistance (peak) | RON(peak) | | 7.1 | 24 | Ω | VI = GND; ISW = 8 mA; VCC = 2.3 V to 2.7 V | 6 |
| ON resistance (peak) | RON(peak) | | 6.9 | 21 | Ω | VI = GND; ISW = 12 mA; VCC = 2.7 V | 6 |
| ON resistance (peak) | RON(peak) | | 6.5 | 18 | Ω | VI = GND; ISW = 24 mA; VCC = 3 V to 3.6 V | 6 |
| ON resistance (peak) | RON(peak) | | 5.8 | 15 | Ω | VI = GND; ISW = 32 mA; VCC = 4.5 V to 5.5 V | 6 |
| ON resistance (rail) | RON(rail) | | 10.4 | 45 | Ω | VI = VCC; ISW = 4 mA; VCC = 1.65 V to 1.95 V | 6 |
| ON resistance (rail) | RON(rail) | | 7.6 | 30 | Ω | VI = VCC; ISW = 8 mA; VCC = 2.3 V to 2.7 V | 6 |
| ON resistance (rail) | RON(rail) | | 7 | 27 | Ω | VI = VCC; ISW = 12 mA; VCC = 2.7 V | 6 |
| ON resistance (rail) | RON(rail) | | 6.1 | 23 | Ω | VI = VCC; ISW = 24 mA; VCC = 3 V to 3.6 V | 6 |
| ON resistance (rail) | RON(rail) | | 4.9 | 15 | Ω | VI = VCC; ISW = 32 mA; VCC = 4.5 V to 5.5 V | 6 |
| propagation delay nY to nZ or nZ to nY | tpd | | 0.8 | 3 | ns | VCC = 1.65 V to 1.95 V | 9 |
| propagation delay nY to nZ or nZ to nY | tpd | | 0.4 | 2 | ns | VCC = 2.3 V to 2.7 V | 9 |
| propagation delay nY to nZ or nZ to nY | tpd | | 0.4 | 1.5 | ns | VCC = 2.7 V | 9 |
| propagation delay nY to nZ or nZ to nY | tpd | | 0.3 | 1.5 | ns | VCC = 3.0 V to 3.6 V | 9 |
| propagation delay nY to nZ or nZ to nY | tpd | | 0.2 | 1 | ns | VCC = 4.5 V to 5.5 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 5.3 | 12.5 | ns | VCC = 1.65 V to 1.95 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 3 | 7 | ns | VCC = 2.3 V to 2.7 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 2.6 | 6.5 | ns | VCC = 2.7 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 2.5 | 5.5 | ns | VCC = 3.0 V to 3.6 V | 9 |
| enable time nE to nY or nZ | ten | 1 | 1.9 | 5 | ns | VCC = 4.5 V to 5.5 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 4.2 | 11.5 | ns | VCC = 1.65 V to 1.95 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 2.4 | 7 | ns | VCC = 2.3 V to 2.7 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 3.6 | 8.5 | ns | VCC = 2.7 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 3.4 | 7.5 | ns | VCC = 3.0 V to 3.6 V | 9 |
| disable time nE to nY or nZ | tdis | 1 | 2.5 | 6.5 | ns | VCC = 4.5 V to 5.5 V | 9 |
## CAD (KiCad official)
- Symbol: `74LVC4066PW-Q100J`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `74lvc4066pw-q100j-etched.step` / `74lvc4066pw-q100j-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74lvc4066pw-q100j.step` / `74lvc4066pw-q100j.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908524483055616) (20 pp, sha256 `246d669bf5145318`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74lvc4066pw-q100j-datasheet.pdf)