# 74LVC3G06DC

**Nexperia** · Inverters · VSSOP-8-0.5mm

74LVC3G06DC from Nexperia, in a VSSOP-8-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Data input of inverter 1; Schmitt-trigger input, overvoltage tolerant to 5.5 V, with absolute maximum VI of -0.5 V to +6.5 V. |
| 2 | 3Y | output | Open-drain data output of inverter 3; high-impedance when the input is HIGH and LOW when the input is LOW (per the function table), rated for VO up to 5.5 V in active mode. |
| 3 | 2A | input | Data input of inverter 2; Schmitt-trigger input, overvoltage tolerant to 5.5 V, with absolute maximum VI of -0.5 V to +6.5 V. |
| 4 | GND | power_in | Ground (0 V) reference for all voltages. |
| 5 | 2Y | output | Open-drain data output of inverter 2; high-impedance when the input is HIGH and LOW when the input is LOW (per the function table), rated for VO up to 5.5 V in active mode. |
| 6 | 3A | input | Data input of inverter 3; Schmitt-trigger input, overvoltage tolerant to 5.5 V, with absolute maximum VI of -0.5 V to +6.5 V. |
| 7 | 1Y | output | Open-drain data output of inverter 1; high-impedance when the input is HIGH and LOW when the input is LOW (per the function table), rated for VO up to 5.5 V in active mode. |
| 8 | VCC | power_in | Supply voltage; recommended range 1.65 V to 5.5 V (absolute maximum -0.5 V to +6.5 V). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | VSSOP-8-0.5mm |
| Category | Logic |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | -0.5 |  | 6.5 | V |  | 4 |
| input clamping current | IIK | -50 |  |  | mA | VI < 0 V | 4 |
| input voltage | VI | -0.5 |  | 6.5 | V |  | 4 |
| output clamping current | IOK | -50 |  |  | mA | VO < 0 V | 4 |
| output voltage | VO | -0.5 |  | 6.5 | V | Active mode | 4 |
| output current | IO |  |  | 50 | mA | VO = 0 V to 6.5 V | 4 |
| supply current | ICC |  |  | 100 | mA |  | 4 |
| ground current | IGND | -100 |  |  | mA |  | 4 |
| storage temperature | Tstg | -65 |  | 150 | °C |  | 4 |
| total power dissipation | Ptot |  |  | 250 | mW | Tamb = -40 °C to +125 °C | 4 |
| supply voltage | VCC | 1.65 |  | 5.5 | V |  | 4 |
| input voltage | VI | 0 |  | 5.5 | V |  | 4 |
| output voltage | VO | 0 |  | 5.5 | V | Active mode | 4 |
| ambient temperature | Tamb | -40 |  | 125 | °C |  | 4 |
| input transition rise and fall rate | Δt/ΔV |  |  | 20 | ns/V | VCC = 1.65 V to 2.7 V | 4 |
| input transition rise and fall rate | Δt/ΔV |  |  | 10 | ns/V | VCC = 2.7 V to 5.5 V | 4 |
| HIGH-level input voltage | VIH | 1.7 |  |  | V | Tamb = -40 °C to +85 °C; VCC = 2.3 V to 2.7 V | 5 |
| HIGH-level input voltage | VIH | 2 |  |  | V | Tamb = -40 °C to +85 °C; VCC = 2.7 V to 3.6 V | 5 |
| LOW-level input voltage | VIL |  |  | 0.7 | V | Tamb = -40 °C to +85 °C; VCC = 2.3 V to 2.7 V | 5 |
| LOW-level input voltage | VIL |  |  | 0.8 | V | Tamb = -40 °C to +85 °C; VCC = 2.7 V to 3.6 V | 5 |
| LOW-level output voltage | VOL |  |  | 0.1 | V | Tamb = -40 °C to +85 °C; VI = VIH or VIL; IO = 100 μA; VCC = 1.65 V to 5.5 V | 5 |
| LOW-level output voltage | VOL |  |  | 0.45 | V | Tamb = -40 °C to +85 °C; VI = VIH or VIL; IO = 4 mA; VCC = 1.65 V | 5 |
| LOW-level output voltage | VOL |  |  | 0.3 | V | Tamb = -40 °C to +85 °C; VI = VIH or VIL; IO = 8 mA; VCC = 2.3 V | 5 |
| LOW-level output voltage | VOL |  |  | 0.4 | V | Tamb = -40 °C to +85 °C; VI = VIH or VIL; IO = 12 mA; VCC = 2.7 V | 5 |
| LOW-level output voltage | VOL |  |  | 0.55 | V | Tamb = -40 °C to +85 °C; VI = VIH or VIL; IO = 24 mA; VCC = 3.0 V | 5 |
| input leakage current | II | -1 |  | 1 | μA | Tamb = -40 °C to +85 °C; VI = 5.5 V or GND; VCC = 0 V to 5.5 V | 5 |
| OFF-state output current | IOZ | -2 |  | 2 | μA | Tamb = -40 °C to +85 °C; VI = VIH or VIL; VO = VCC or GND; VCC = 5.5 V | 5 |
| power-off leakage current | IOFF | -2 |  | 2 | μA | Tamb = -40 °C to +85 °C; VI or VO = 5.5 V; VCC = 0 V | 5 |
| supply current | ICC |  | 0.1 | 4 | μA | Tamb = -40 °C to +85 °C; VI = 5.5 V or GND; IO = 0 A; VCC = 1.65 V to 5.5 V | 5 |
| additional supply current per pin | ΔICC |  | 5 | 500 | μA | Tamb = -40 °C to +85 °C; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V | 5 |
| LOW-level output voltage | VOL |  |  | 0.1 | V | Tamb = -40 °C to +125 °C; VI = VIH or VIL; IO = 100 μA; VCC = 1.65 V to 5.5 V | 6 |
| LOW-level output voltage | VOL |  |  | 0.7 | V | Tamb = -40 °C to +125 °C; VI = VIH or VIL; IO = 4 mA; VCC = 1.65 V | 6 |
| LOW-level output voltage | VOL |  |  | 0.45 | V | Tamb = -40 °C to +125 °C; VI = VIH or VIL; IO = 8 mA; VCC = 2.3 V | 6 |
| LOW-level output voltage | VOL |  |  | 0.6 | V | Tamb = -40 °C to +125 °C; VI = VIH or VIL; IO = 12 mA; VCC = 2.7 V | 6 |
| LOW-level output voltage | VOL |  |  | 0.8 | V | Tamb = -40 °C to +125 °C; VI = VIH or VIL; IO = 24 mA; VCC = 3.0 V | 6 |
| input leakage current | II | -1 |  | 1 | μA | Tamb = -40 °C to +125 °C; VI = 5.5 V or GND; VCC = 0 V to 5.5 V | 6 |
| OFF-state output current | IOZ | -2 |  | 2 | μA | Tamb = -40 °C to +125 °C; VI = VIH or VIL; VO = VCC or GND; VCC = 5.5 V | 6 |
| power-off leakage current | IOFF | -2 |  | 2 | μA | Tamb = -40 °C to +125 °C; VI or VO = 5.5 V; VCC = 0 V | 6 |
| supply current | ICC |  |  | 4 | μA | Tamb = -40 °C to +125 °C; VI = 5.5 V or GND; IO = 0 A; VCC = 1.65 V to 5.5 V | 6 |
| additional supply current per pin | ΔICC |  |  | 500 | μA | Tamb = -40 °C to +125 °C; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V | 6 |
| propagation delay | tpd | 1 | 2.6 | 6.5 | ns | Tamb = -40 °C to +85 °C; nA to nY; see Fig. 4; VCC = 1.65 V to 1.95 V | 6 |
| propagation delay | tpd | 0.5 | 1.6 | 3.9 | ns | Tamb = -40 °C to +85 °C; nA to nY; see Fig. 4; VCC = 2.3 V to 2.7 V | 6 |
| propagation delay | tpd | 1 | 2.2 | 4.2 | ns | Tamb = -40 °C to +85 °C; nA to nY; see Fig. 4; VCC = 2.7 V | 6 |
| propagation delay | tpd | 0.5 | 2 | 3.4 | ns | Tamb = -40 °C to +85 °C; nA to nY; see Fig. 4; VCC = 3.0 V to 3.6 V | 6 |
| propagation delay | tpd | 0.5 | 1.4 | 2.9 | ns | Tamb = -40 °C to +85 °C; nA to nY; see Fig. 4; VCC = 4.5 V to 5.5 V | 6 |
| propagation delay | tpd | 1 |  | 8.2 | ns | Tamb = -40 °C to +125 °C; nA to nY; see Fig. 4; VCC = 1.65 V to 1.95 V | 6 |
| propagation delay | tpd | 0.5 |  | 4.9 | ns | Tamb = -40 °C to +125 °C; nA to nY; see Fig. 4; VCC = 2.3 V to 2.7 V | 6 |
| propagation delay | tpd | 1 |  | 5.3 | ns | Tamb = -40 °C to +125 °C; nA to nY; see Fig. 4; VCC = 2.7 V | 6 |
| propagation delay | tpd | 0.5 |  | 4.3 | ns | Tamb = -40 °C to +125 °C; nA to nY; see Fig. 4; VCC = 3.0 V to 3.6 V | 6 |
| propagation delay | tpd | 0.5 |  | 3.7 | ns | Tamb = -40 °C to +125 °C; nA to nY; see Fig. 4; VCC = 4.5 V to 5.5 V | 6 |

## CAD (KiCad official)

- Symbol: `74LVC3G06DC`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8-0.5mm (KiCad packages3D, STEP)
- 3D model files: `74lvc3g06dc-etched.step` / `74lvc3g06dc-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74lvc3g06dc.step` / `74lvc3g06dc.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914266183241728) (15 pp, sha256 `8f3906da58ec2bc2`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/74lvc3g06dc-datasheet.pdf)