main
Ray
Publish 0.1.0
bb7a6df
74LVC373AD
Nexperia · Latches · SO-20-300mil
74LVC373AD from Nexperia, in a SO-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input, active LOW; a HIGH level sends the Qn outputs to the high-impedance OFF-state without changing the latch contents. |
| 2 | Q0 | tri_state | Latch output 0 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 3 | D0 | input | Data input 0; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 4 | D1 | input | Data input 1; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 5 | Q1 | tri_state | Latch output 1 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 6 | Q2 | tri_state | Latch output 2 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 7 | D2 | input | Data input 2; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 8 | D3 | input | Data input 3; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 9 | Q3 | tri_state | Latch output 3 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 10 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 11 | LE | input | Latch enable input, active HIGH; while HIGH the latches are transparent, and while LOW they hold the data present a set-up time before the HIGH-to-LOW transition. |
| 12 | Q4 | tri_state | Latch output 4 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 13 | D4 | input | Data input 4; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 14 | D5 | input | Data input 5; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 15 | Q5 | tri_state | Latch output 5 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 16 | Q6 | tri_state | Latch output 6 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 17 | D6 | input | Data input 6; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 18 | D7 | input | Data input 7; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 19 | Q7 | tri_state | Latch output 7 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 20 | VCC | power_in | Supply voltage; 1.65 V to 3.6 V recommended, with functional operation down to 1.2 V per the recommended operating conditions. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SO-20-300mil |
| Category | Logic ICs |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 6.5 | V | 4 | ||
| input clamping current | IIK | -50 | mA | VI < 0 | 4 | ||
| input voltage | VI | -0.5 | 6.5 | V | 4 | ||
| output voltage HIGH or LOW-state | VO | -0.5 | V | 4 | |||
| output voltage 3-state | VO | -0.5 | 6.5 | V | 3-state | 4 | |
| output current | IO | -50 | 50 | mA | VO = 0 V to VCC | 4 | |
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| supply voltage | VCC | 1.65 | 3.6 | V | 5 | ||
| supply voltage (functional) | VCC | 1.2 | V | functional | 5 | ||
| input voltage | VI | 0 | 5.5 | V | 5 | ||
| output voltage HIGH or LOW-state | VO | 0 | V | 5 | |||
| output voltage 3-state | VO | 0 | 5.5 | V | 3-state | 5 | |
| ambient temperature | Tamb | -40 | 125 | °C | in free air | 5 | |
| input transition rise and fall rate | Δt/ΔV | 0 | 20 | ns/V | VCC = 1.65 V to 2.7 V | 5 | |
| input transition rise and fall rate | Δt/ΔV | 0 | 10 | ns/V | VCC = 2.7 V to 3.6 V | 5 | |
| HIGH-level input voltage | VIH | 1.08 | V | VCC = 1.2 V; -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V; -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 2 | V | VCC = 2.7 V to 3.6 V; -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.12 | V | VCC = 1.2 V; -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V; -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.8 | V | VCC = 2.7 V to 3.6 V; -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 1.05 | V | VI = VIH or VIL; IO = -4 mA; VCC = 1.65 V; -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 1.65 | V | VI = VIH or VIL; IO = -8 mA; VCC = 2.3 V; -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 2.05 | V | VI = VIH or VIL; IO = -12 mA; VCC = 2.7 V; -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 2.25 | V | VI = VIH or VIL; IO = -18 mA; VCC = 3.0 V; -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 2 | V | VI = VIH or VIL; IO = -24 mA; VCC = 3.0 V; -40 °C to +125 °C | 5 | ||
| LOW-level output voltage | VOL | 0.3 | V | VI = VIH or VIL; IO = 100 μA; VCC = 1.65 V to 3.6 V; -40 °C to +125 °C | 5 | ||
| LOW-level output voltage | VOL | 0.65 | V | VI = VIH or VIL; IO = 4 mA; VCC = 1.65 V; -40 °C to +125 °C | 5 | ||
| LOW-level output voltage | VOL | 0.8 | V | VI = VIH or VIL; IO = 8 mA; VCC = 2.3 V; -40 °C to +125 °C | 5 | ||
| LOW-level output voltage | VOL | 0.6 | V | VI = VIH or VIL; IO = 12 mA; VCC = 2.7 V; -40 °C to +125 °C | 5 | ||
| input leakage current | II | -20 | 0.1 | 20 | μA | VCC = 3.6 V; VI = 5.5 V or GND; -40 °C to +125 °C | 5 |
| OFF-state output current | IOZ | -20 | 0.1 | 20 | μA | VI = VIH or VIL; VCC = 3.6 V; VO = 5.5 V or GND; -40 °C to +125 °C | 5 |
| power-off leakage current | IOFF | -20 | 0.1 | 20 | μA | VCC = 0 V; VI or VO = 5.5 V; -40 °C to +125 °C | 6 |
| supply current | ICC | 0.1 | 40 | μA | VCC = 3.6 V; VI = VCC or GND; IO = 0 A; -40 °C to +125 °C | 6 | |
| additional supply current per input pin | ΔICC | 5 | 5000 | μA | per input pin; VCC = 2.7 V to 3.6 V; VI = VCC - 0.6 V; IO = 0 A; -40 °C to +125 °C | 6 | |
| propagation delay Dn to Qn | tpd | 1.5 | 6.5 | 18.2 | ns | VCC = 1.65 V to 1.95 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1 | 3.4 | 9.4 | ns | VCC = 2.3 V to 2.7 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1.5 | 3.4 | 10 | ns | VCC = 2.7 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1.5 | 2.9 | 8.5 | ns | VCC = 3.0 V to 3.6 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 2.2 | 7.3 | 19.3 | ns | VCC = 1.65 V to 1.95 V; see Fig. 7; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 1.5 | 3.9 | 10 | ns | VCC = 2.3 V to 2.7 V; see Fig. 7; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 1.5 | 3.5 | 10.5 | ns | VCC = 2.7 V; see Fig. 7; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 1.5 | 3.3 | 9 | ns | VCC = 3.0 V to 3.6 V; see Fig. 7; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 6.8 | 20.3 | ns | VCC = 1.65 V to 1.95 V; see Fig. 8; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 3.8 | 11.2 | ns | VCC = 2.3 V to 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 3.8 | 11 | ns | VCC = 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 3.1 | 10 | ns | VCC = 3.0 V to 3.6 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 2.3 | 4.3 | 11.9 | ns | VCC = 1.65 V to 1.95 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 1 | 2.4 | 6.8 | ns | VCC = 2.3 V to 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 1.5 | 3.2 | 9 | ns | VCC = 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 1.5 | 3 | 8 | ns | VCC = 3.0 V to 3.6 V; see Fig. 8; -40 °C to +125 °C | 6 |
| set-up time Dn to LE | tsu | 4 | ns | VCC = 1.65 V to 1.95 V; see Fig. 9; -40 °C to +125 °C | 7 | ||
| set-up time Dn to LE | tsu | 3 | ns | VCC = 2.3 V to 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 | ||
| set-up time Dn to LE | tsu | 2 | ns | VCC = 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 | ||
| set-up time Dn to LE | tsu | 2 | 0 | ns | VCC = 3.0 V to 3.6 V; see Fig. 9; -40 °C to +125 °C | 7 | |
| hold time Dn to LE | th | 3 | ns | VCC = 1.65 V to 1.95 V; see Fig. 9; -40 °C to +125 °C | 7 | ||
| hold time Dn to LE | th | 2 | ns | VCC = 2.3 V to 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 | ||
| hold time Dn to LE | th | 1.5 | ns | VCC = 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 | ||
| hold time Dn to LE | th | 1.5 | 0.3 | ns | VCC = 3.0 V to 3.6 V; see Fig. 9; -40 °C to +125 °C | 7 |
CAD (KiCad official)
- Symbol:
74LVC373AD - Footprint:
Package_SO:SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm - 3D model: SO-20-300mil, generated on the KiCad land (body 7.5 x 12.8 mm, terminals on the pads, 2.65 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
74lvc373ad-etched.step/74lvc373ad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lvc373ad.step/74lvc373ad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (15 pp, sha256
42c9151eb83bb7c3, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74LVC373AD
**Nexperia** · Latches · SO-20-300mil
74LVC373AD from Nexperia, in a SO-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input, active LOW; a HIGH level sends the Qn outputs to the high-impedance OFF-state without changing the latch contents. |
| 2 | Q0 | tri_state | Latch output 0 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 3 | D0 | input | Data input 0; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 4 | D1 | input | Data input 1; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 5 | Q1 | tri_state | Latch output 1 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 6 | Q2 | tri_state | Latch output 2 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 7 | D2 | input | Data input 2; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 8 | D3 | input | Data input 3; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 9 | Q3 | tri_state | Latch output 3 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 10 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 11 | LE | input | Latch enable input, active HIGH; while HIGH the latches are transparent, and while LOW they hold the data present a set-up time before the HIGH-to-LOW transition. |
| 12 | Q4 | tri_state | Latch output 4 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 13 | D4 | input | Data input 4; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 14 | D5 | input | Data input 5; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 15 | Q5 | tri_state | Latch output 5 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 16 | Q6 | tri_state | Latch output 6 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 17 | D6 | input | Data input 6; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 18 | D7 | input | Data input 7; input voltage range is 0 V to 5.5 V per the recommended operating conditions, allowing 3.3 V or 5 V drive. |
| 19 | Q7 | tri_state | Latch output 7 (3-state); goes high-impedance when OE is HIGH, and outputs are high-impedance when VCC = 0 V. |
| 20 | VCC | power_in | Supply voltage; 1.65 V to 3.6 V recommended, with functional operation down to 1.2 V per the recommended operating conditions. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SO-20-300mil |
| Category | Logic ICs |
| Pins | 21 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | | 6.5 | V | | 4 |
| input clamping current | IIK | -50 | | | mA | VI < 0 | 4 |
| input voltage | VI | -0.5 | | 6.5 | V | | 4 |
| output voltage HIGH or LOW-state | VO | -0.5 | | | V | | 4 |
| output voltage 3-state | VO | -0.5 | | 6.5 | V | 3-state | 4 |
| output current | IO | -50 | | 50 | mA | VO = 0 V to VCC | 4 |
| total power dissipation | Ptot | | | 500 | mW | Tamb = -40 °C to +125 °C | 4 |
| supply voltage | VCC | 1.65 | | 3.6 | V | | 5 |
| supply voltage (functional) | VCC | 1.2 | | | V | functional | 5 |
| input voltage | VI | 0 | | 5.5 | V | | 5 |
| output voltage HIGH or LOW-state | VO | 0 | | | V | | 5 |
| output voltage 3-state | VO | 0 | | 5.5 | V | 3-state | 5 |
| ambient temperature | Tamb | -40 | | 125 | °C | in free air | 5 |
| input transition rise and fall rate | Δt/ΔV | 0 | | 20 | ns/V | VCC = 1.65 V to 2.7 V | 5 |
| input transition rise and fall rate | Δt/ΔV | 0 | | 10 | ns/V | VCC = 2.7 V to 3.6 V | 5 |
| HIGH-level input voltage | VIH | 1.08 | | | V | VCC = 1.2 V; -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 1.7 | | | V | VCC = 2.3 V to 2.7 V; -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 2 | | | V | VCC = 2.7 V to 3.6 V; -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.12 | V | VCC = 1.2 V; -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.7 | V | VCC = 2.3 V to 2.7 V; -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.8 | V | VCC = 2.7 V to 3.6 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 1.05 | | | V | VI = VIH or VIL; IO = -4 mA; VCC = 1.65 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 1.65 | | | V | VI = VIH or VIL; IO = -8 mA; VCC = 2.3 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 2.05 | | | V | VI = VIH or VIL; IO = -12 mA; VCC = 2.7 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 2.25 | | | V | VI = VIH or VIL; IO = -18 mA; VCC = 3.0 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 2 | | | V | VI = VIH or VIL; IO = -24 mA; VCC = 3.0 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | | 0.3 | V | VI = VIH or VIL; IO = 100 μA; VCC = 1.65 V to 3.6 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | | 0.65 | V | VI = VIH or VIL; IO = 4 mA; VCC = 1.65 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | | 0.8 | V | VI = VIH or VIL; IO = 8 mA; VCC = 2.3 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | | 0.6 | V | VI = VIH or VIL; IO = 12 mA; VCC = 2.7 V; -40 °C to +125 °C | 5 |
| input leakage current | II | -20 | 0.1 | 20 | μA | VCC = 3.6 V; VI = 5.5 V or GND; -40 °C to +125 °C | 5 |
| OFF-state output current | IOZ | -20 | 0.1 | 20 | μA | VI = VIH or VIL; VCC = 3.6 V; VO = 5.5 V or GND; -40 °C to +125 °C | 5 |
| power-off leakage current | IOFF | -20 | 0.1 | 20 | μA | VCC = 0 V; VI or VO = 5.5 V; -40 °C to +125 °C | 6 |
| supply current | ICC | | 0.1 | 40 | μA | VCC = 3.6 V; VI = VCC or GND; IO = 0 A; -40 °C to +125 °C | 6 |
| additional supply current per input pin | ΔICC | | 5 | 5000 | μA | per input pin; VCC = 2.7 V to 3.6 V; VI = VCC - 0.6 V; IO = 0 A; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1.5 | 6.5 | 18.2 | ns | VCC = 1.65 V to 1.95 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1 | 3.4 | 9.4 | ns | VCC = 2.3 V to 2.7 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1.5 | 3.4 | 10 | ns | VCC = 2.7 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay Dn to Qn | tpd | 1.5 | 2.9 | 8.5 | ns | VCC = 3.0 V to 3.6 V; see Fig. 6; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 2.2 | 7.3 | 19.3 | ns | VCC = 1.65 V to 1.95 V; see Fig. 7; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 1.5 | 3.9 | 10 | ns | VCC = 2.3 V to 2.7 V; see Fig. 7; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 1.5 | 3.5 | 10.5 | ns | VCC = 2.7 V; see Fig. 7; -40 °C to +125 °C | 6 |
| propagation delay LE to Qn | tpd | 1.5 | 3.3 | 9 | ns | VCC = 3.0 V to 3.6 V; see Fig. 7; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 6.8 | 20.3 | ns | VCC = 1.65 V to 1.95 V; see Fig. 8; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 3.8 | 11.2 | ns | VCC = 2.3 V to 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 3.8 | 11 | ns | VCC = 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| enable time OE to Qn | ten | 1.5 | 3.1 | 10 | ns | VCC = 3.0 V to 3.6 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 2.3 | 4.3 | 11.9 | ns | VCC = 1.65 V to 1.95 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 1 | 2.4 | 6.8 | ns | VCC = 2.3 V to 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 1.5 | 3.2 | 9 | ns | VCC = 2.7 V; see Fig. 8; -40 °C to +125 °C | 6 |
| disable time OE to Qn | tdis | 1.5 | 3 | 8 | ns | VCC = 3.0 V to 3.6 V; see Fig. 8; -40 °C to +125 °C | 6 |
| set-up time Dn to LE | tsu | 4 | | | ns | VCC = 1.65 V to 1.95 V; see Fig. 9; -40 °C to +125 °C | 7 |
| set-up time Dn to LE | tsu | 3 | | | ns | VCC = 2.3 V to 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 |
| set-up time Dn to LE | tsu | 2 | | | ns | VCC = 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 |
| set-up time Dn to LE | tsu | 2 | 0 | | ns | VCC = 3.0 V to 3.6 V; see Fig. 9; -40 °C to +125 °C | 7 |
| hold time Dn to LE | th | 3 | | | ns | VCC = 1.65 V to 1.95 V; see Fig. 9; -40 °C to +125 °C | 7 |
| hold time Dn to LE | th | 2 | | | ns | VCC = 2.3 V to 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 |
| hold time Dn to LE | th | 1.5 | | | ns | VCC = 2.7 V; see Fig. 9; -40 °C to +125 °C | 7 |
| hold time Dn to LE | th | 1.5 | 0.3 | | ns | VCC = 3.0 V to 3.6 V; see Fig. 9; -40 °C to +125 °C | 7 |
## CAD (KiCad official)
- Symbol: `74LVC373AD`
- Footprint: `Package_SO:SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm`
- 3D model: SO-20-300mil, generated on the KiCad land (body 7.5 x 12.8 mm, terminals on the pads, 2.65 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `74lvc373ad-etched.step` / `74lvc373ad-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74lvc373ad.step` / `74lvc373ad.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/74LVC373A.pdf) (15 pp, sha256 `42c9151eb83bb7c3`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74lvc373ad-datasheet.pdf)